최근, 각 산업분야에서의 산업 폐기물 처리와 환경 친화적 재활용 방안의 모색이 절실히 요구되는 실정이다. 특히 건설업에 있어서도 건설 폐기물 발생에 따르는 환경파괴에 대한 대책 및 재료의 자원 고갈 문제에 따른 대책과 재활용 방안이 심각하게 요구되는 실정이다. 국내의 경우, 건설 폐기물의 약 60% 이상을 폐 콘크리트가 차지하고 있으며 자연골재의 고갈이 심각한 수준에 도달한 현실에서 폐 콘크리트의 콘크리트계 미분말을 재활용한 연구와 재생골재 사용이 절실히 요구되고 있다. 이에 폐기물 증가와 부존자원 부족에 대한 사회적 배경을 인식하고, 그에 대한 재활용 방안과 환경친화적 재료 개발에 대한 기술적 연구의 목적을 가지게 되었다. 따라서 본 연구에서는 재생시멘트와 재생골재의 유효 이용을 위한 기술 개발의 일환으로, 폐 콘크리트 미분말과 재생 초경량 골재를 이용해 더욱 성능 개선된 다공질의 포러스 콘크리트의 물성을 연구 및 개발하여 활용 방안을 모색해보고, 실제의 재활용하기 위한 재생 방법의 제안을 목적으로 한다. 본 연구의 범위로는 재생시멘트 및 재생골재의 이용의 확대화를 위한 시멘트 2차 ...
최근, 각 산업분야에서의 산업 폐기물 처리와 환경 친화적 재활용 방안의 모색이 절실히 요구되는 실정이다. 특히 건설업에 있어서도 건설 폐기물 발생에 따르는 환경파괴에 대한 대책 및 재료의 자원 고갈 문제에 따른 대책과 재활용 방안이 심각하게 요구되는 실정이다. 국내의 경우, 건설 폐기물의 약 60% 이상을 폐 콘크리트가 차지하고 있으며 자연골재의 고갈이 심각한 수준에 도달한 현실에서 폐 콘크리트의 콘크리트계 미분말을 재활용한 연구와 재생골재 사용이 절실히 요구되고 있다. 이에 폐기물 증가와 부존자원 부족에 대한 사회적 배경을 인식하고, 그에 대한 재활용 방안과 환경친화적 재료 개발에 대한 기술적 연구의 목적을 가지게 되었다. 따라서 본 연구에서는 재생시멘트와 재생골재의 유효 이용을 위한 기술 개발의 일환으로, 폐 콘크리트 미분말과 재생 초경량 골재를 이용해 더욱 성능 개선된 다공질의 포러스 콘크리트의 물성을 연구 및 개발하여 활용 방안을 모색해보고, 실제의 재활용하기 위한 재생 방법의 제안을 목적으로 한다. 본 연구의 범위로는 재생시멘트 및 재생골재의 이용의 확대화를 위한 시멘트 2차 제품 개발과 활용가능성 검토를 목적으로 한다. 따라서, 먼저 현재까지 연구된 재생시멘트와 재생골재를 이용한 친환경 2차 제품을 제조하여 그 물성을 고찰하였다. 그리고 기존의 연구결과, 재생시멘트의 낮은 강도가 그 활용에 있어 문제점으로 제기되고 있기 때문에 이론적 고찰을 통하여 재생시멘트의 비구조용 건축재료로서의 활용 가능성을 연구하였다. 특히, 재생시멘트의 경우, 현재 연구가 진행되고 있는 단계로서 본 연구에서는 모재 모르터를 통하여 재생시멘트를 제조하였으며, 향후 실제 폐콘크리트를 이용한 재생시멘트의 적용실험이 요구된다. 이상과 같이 재생시멘트와 재생경량골재를 활용한 포러스콘크리트에 관한 연구에서 얻은 결과를 정리하면 다음과 같은 결론을 얻을 수 있었다. (1) 초경량 골재를 이용한 재생 포러스콘크리트의 단위용적중량은 쇄석을 사용한 보통의 포러스콘크리트에 비하여 50% 가량 낮은 것으로 나타났다. (2) 재생 포러스콘크리트의 열전도율은 보통콘크리트에 비해 93% 정도 낮은 것으로 나타났으며, 이는 포러스콘크리트의 내부 공극과 초경량 골재 내부의 독립공극에 의한 것이다. 특히, 현재 사용중인 ALC, 퍼라이트 모르터 등 많은 고기능 건축재와 유사한 단열성능을 나타내었다. (3) 재생 포러스콘크리트의 압축강도 실험결과 재생시멘트의 치환율에 따른 압축강도의 감소는 나타나지 않았으며, 이론 공극과 골재 내부 공극에 의하여 강도가 발현되는 것으로 나타났다. 따라서, 재생시멘트는 포러스콘크리트 등 시멘트 2차제품 활용이 가능한 것으로 나타났다. (4) 경량 포러스콘크리트의 내부공극량에 좌우되는 경량성, 단열성능 등의 제반 물질과 초음파 전파속도법의 상관관계가 높은 것으로 나타났다. 향후, 실재 폐콘크리트를 이용한 재생시멘트의 물성연구와 함께 다양한 재생 건축재료를 이용한 신기능 건축재료의 개발에 관한 연구가 진행되어야 할 것으로 판단된다.
최근, 각 산업분야에서의 산업 폐기물 처리와 환경 친화적 재활용 방안의 모색이 절실히 요구되는 실정이다. 특히 건설업에 있어서도 건설 폐기물 발생에 따르는 환경파괴에 대한 대책 및 재료의 자원 고갈 문제에 따른 대책과 재활용 방안이 심각하게 요구되는 실정이다. 국내의 경우, 건설 폐기물의 약 60% 이상을 폐 콘크리트가 차지하고 있으며 자연골재의 고갈이 심각한 수준에 도달한 현실에서 폐 콘크리트의 콘크리트계 미분말을 재활용한 연구와 재생골재 사용이 절실히 요구되고 있다. 이에 폐기물 증가와 부존자원 부족에 대한 사회적 배경을 인식하고, 그에 대한 재활용 방안과 환경친화적 재료 개발에 대한 기술적 연구의 목적을 가지게 되었다. 따라서 본 연구에서는 재생시멘트와 재생골재의 유효 이용을 위한 기술 개발의 일환으로, 폐 콘크리트 미분말과 재생 초경량 골재를 이용해 더욱 성능 개선된 다공질의 포러스 콘크리트의 물성을 연구 및 개발하여 활용 방안을 모색해보고, 실제의 재활용하기 위한 재생 방법의 제안을 목적으로 한다. 본 연구의 범위로는 재생시멘트 및 재생골재의 이용의 확대화를 위한 시멘트 2차 제품 개발과 활용가능성 검토를 목적으로 한다. 따라서, 먼저 현재까지 연구된 재생시멘트와 재생골재를 이용한 친환경 2차 제품을 제조하여 그 물성을 고찰하였다. 그리고 기존의 연구결과, 재생시멘트의 낮은 강도가 그 활용에 있어 문제점으로 제기되고 있기 때문에 이론적 고찰을 통하여 재생시멘트의 비구조용 건축재료로서의 활용 가능성을 연구하였다. 특히, 재생시멘트의 경우, 현재 연구가 진행되고 있는 단계로서 본 연구에서는 모재 모르터를 통하여 재생시멘트를 제조하였으며, 향후 실제 폐콘크리트를 이용한 재생시멘트의 적용실험이 요구된다. 이상과 같이 재생시멘트와 재생경량골재를 활용한 포러스콘크리트에 관한 연구에서 얻은 결과를 정리하면 다음과 같은 결론을 얻을 수 있었다. (1) 초경량 골재를 이용한 재생 포러스콘크리트의 단위용적중량은 쇄석을 사용한 보통의 포러스콘크리트에 비하여 50% 가량 낮은 것으로 나타났다. (2) 재생 포러스콘크리트의 열전도율은 보통콘크리트에 비해 93% 정도 낮은 것으로 나타났으며, 이는 포러스콘크리트의 내부 공극과 초경량 골재 내부의 독립공극에 의한 것이다. 특히, 현재 사용중인 ALC, 퍼라이트 모르터 등 많은 고기능 건축재와 유사한 단열성능을 나타내었다. (3) 재생 포러스콘크리트의 압축강도 실험결과 재생시멘트의 치환율에 따른 압축강도의 감소는 나타나지 않았으며, 이론 공극과 골재 내부 공극에 의하여 강도가 발현되는 것으로 나타났다. 따라서, 재생시멘트는 포러스콘크리트 등 시멘트 2차제품 활용이 가능한 것으로 나타났다. (4) 경량 포러스콘크리트의 내부공극량에 좌우되는 경량성, 단열성능 등의 제반 물질과 초음파 전파속도법의 상관관계가 높은 것으로 나타났다. 향후, 실재 폐콘크리트를 이용한 재생시멘트의 물성연구와 함께 다양한 재생 건축재료를 이용한 신기능 건축재료의 개발에 관한 연구가 진행되어야 할 것으로 판단된다.
In recent days, it is acutely necessary to find the way of destruction and environment friendly recycling system in the industrial waste. Particularly, construction business needs to find not only the alternative way of construction waste's destruction but also recycling way for the exhaustion of na...
In recent days, it is acutely necessary to find the way of destruction and environment friendly recycling system in the industrial waste. Particularly, construction business needs to find not only the alternative way of construction waste's destruction but also recycling way for the exhaustion of natural resources. It is domestic situation that concrete waste has more than 60% possession in construction waste and the exhaustion of natural aggregates is critical, so the study of recycling concrete-fine powder in the concrete waste and the use of recycled aggregate are required. The purpose of this study is to provide the basic data on the optimum method for interfacial separation for an effective recycle of concrete waste by using the thermal properties of concrete. When recognizing the increase of waste and the shortage of natural resources, this study aims to investigate the recycling way of these wastes and development of environment friendly material. In order to use recycled cement and aggregates effectively, this study research the property of porous concrete much improved by the fine powder of recycled concrete and recycled super-light aggregates. Also, the purpose of this study is to propose the practical way for using porous concrete. The scope of study is to examine the development and possibility of practical use of the cement second product for the use of recycled cement and aggregates. Firstly, the cement second product by recycled cement and aggregates is made to study the property of this. From the current result, the problem of recycled cement is low strength. So, this study investigates the possibility of recycled cement as non-structural material. Especially, the recycled cement through the basic material of mortar is made for this study and then is necessary to be made by concrete waste in the future. This study has conclusion of porous concrete by recycled cement and aggregates. (1) The unit weight of recycled porous concrete using super-light aggregates is 50% lower than the normal porous concrete using crushed stones. (2) The inner air and the independence air of the super-light aggregates result in 93% lower conductivity of recycled porous concrete than the normal concrete. In particular, this porous concrete has similar conductivity with ALC and Perlight mortar. (3) The experiment of compressive strength shows no decrease by the rate of replacement. A gap and inner air relate with the strength. So, this result gives the possibility of using cement second product. (4) The light-weight porous concrete has a property relating between light-weight and conductivity by the inner air and supersonic waves. In the future, it requires to study the property of recycled cement from waste concrete and develop new architectural material for new function.
In recent days, it is acutely necessary to find the way of destruction and environment friendly recycling system in the industrial waste. Particularly, construction business needs to find not only the alternative way of construction waste's destruction but also recycling way for the exhaustion of natural resources. It is domestic situation that concrete waste has more than 60% possession in construction waste and the exhaustion of natural aggregates is critical, so the study of recycling concrete-fine powder in the concrete waste and the use of recycled aggregate are required. The purpose of this study is to provide the basic data on the optimum method for interfacial separation for an effective recycle of concrete waste by using the thermal properties of concrete. When recognizing the increase of waste and the shortage of natural resources, this study aims to investigate the recycling way of these wastes and development of environment friendly material. In order to use recycled cement and aggregates effectively, this study research the property of porous concrete much improved by the fine powder of recycled concrete and recycled super-light aggregates. Also, the purpose of this study is to propose the practical way for using porous concrete. The scope of study is to examine the development and possibility of practical use of the cement second product for the use of recycled cement and aggregates. Firstly, the cement second product by recycled cement and aggregates is made to study the property of this. From the current result, the problem of recycled cement is low strength. So, this study investigates the possibility of recycled cement as non-structural material. Especially, the recycled cement through the basic material of mortar is made for this study and then is necessary to be made by concrete waste in the future. This study has conclusion of porous concrete by recycled cement and aggregates. (1) The unit weight of recycled porous concrete using super-light aggregates is 50% lower than the normal porous concrete using crushed stones. (2) The inner air and the independence air of the super-light aggregates result in 93% lower conductivity of recycled porous concrete than the normal concrete. In particular, this porous concrete has similar conductivity with ALC and Perlight mortar. (3) The experiment of compressive strength shows no decrease by the rate of replacement. A gap and inner air relate with the strength. So, this result gives the possibility of using cement second product. (4) The light-weight porous concrete has a property relating between light-weight and conductivity by the inner air and supersonic waves. In the future, it requires to study the property of recycled cement from waste concrete and develop new architectural material for new function.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.