상대적으로 무른 렌즈의 경우 표면의 기계적 성질과 광학적 성능을 개선하기 위해 하드코팅이 필요하다. 하드코팅으로서 졸-겔 공정에 의한 열경화형 유-무기 하이브리드 코팅은 다양한 기재에 기능성을 부여하는데 이용될 수 있다.
본 연구에서는 플라스틱 렌즈의 표면특성과 광학적 특성을 개선하기위해 하이브리드 물질로 3-글리시드옥시프로필트리메톡시실란(GPTS), 메틸트리메톡시실란(MTMS) 및 테트라에틸 오소실리케이트(TEOS)를 사용하였고, 흐름코팅(flow coating)을 실시하여 140℃에서 4시간 열경화하였다. 3400cm^(-1)에서 SiOH의 O-H 신축진동과 1110-1030cm^(-1)에서 Si-O-Si 비대칭 굽힘운동에 의해 나타난 IR특성으로 보아 졸-겔에 의한 코팅을 확인할 수 있었다. GPTS, MTMS와 TEOS의 몰 비가 1 : 1 : 2일 때 최적의 표면특성을 보였으며, 이 코팅 시스템을 자외선(UV)차단 및 광변색 코팅에 적용하였다.
자외선 차단 코팅을 위하여 2-(2-하이드록시-5-메틸 펜틸)벤조트리아졸 (...
상대적으로 무른 렌즈의 경우 표면의 기계적 성질과 광학적 성능을 개선하기 위해 하드코팅이 필요하다. 하드코팅으로서 졸-겔 공정에 의한 열경화형 유-무기 하이브리드 코팅은 다양한 기재에 기능성을 부여하는데 이용될 수 있다.
본 연구에서는 플라스틱 렌즈의 표면특성과 광학적 특성을 개선하기위해 하이브리드 물질로 3-글리시드옥시프로필트리메톡시실란(GPTS), 메틸트리메톡시실란(MTMS) 및 테트라에틸 오소실리케이트(TEOS)를 사용하였고, 흐름코팅(flow coating)을 실시하여 140℃에서 4시간 열경화하였다. 3400cm^(-1)에서 SiOH의 O-H 신축진동과 1110-1030cm^(-1)에서 Si-O-Si 비대칭 굽힘운동에 의해 나타난 IR특성으로 보아 졸-겔에 의한 코팅을 확인할 수 있었다. GPTS, MTMS와 TEOS의 몰 비가 1 : 1 : 2일 때 최적의 표면특성을 보였으며, 이 코팅 시스템을 자외선(UV)차단 및 광변색 코팅에 적용하였다.
자외선 차단 코팅을 위하여 2-(2-하이드록시-5-메틸 펜틸)벤조트리아졸 (UV P), 2-(2'-하이드록시-5'-테트-옥틸펜닐)-벤조트리아졸 (UV 329) 및 2-하이드록시-4-옥톡시 벤조페논 (UV 531)을 자외선 흡수제로서 무게단위 0.5-4%로 사용하였다. PMMA, CR 39 및 PC 기재에서 자외선 차단 코팅을 하여 그 특성을 조사하였다. 모든 자외선 흡수제에서 사용된 양의 증가에 따라 자외선 투과도는 감소하였으며, 특히 PMMA에서는 그 효과가 가장 우수하였고, CR 39에서도 자외선 차단 효과를 보였다. 자외선 차단 코팅을 한 CR 39렌즈에서는 부착력, 내온수성 및 내약품성이 우수하였고, 4H의 연필경도를 보였으나, 내마모성은 좋지 않았다. 주사전자현미경(SEM)에 의한 관찰에서 표면은 균일하였으며 어떤 잔금도 보이지 않았다.
광변색 코팅을 위하여 하이브리드 코팅액에 광변색 물질로 스피로나프토옥사진 계열과 나프토피란 계열을 무게단위 3% 사용하여 청, 적, 황, 녹색을 띤 검정(graphite) 및 자색으로 변색되는 렌즈를 제조하였다. 모든 광변색 렌즈에서 자외선 조사 후에는 적색이동과 농색효과가 관찰되었다. 광변색 렌즈의 퇴색 반감기는 3-5분이었다. 연필 경도는 4-5H, 내마모성은 1-2등급이었으며, 내온수성과 아세톤 및 에탄올에 대한 내약품성 모두 우수하였다. SEM에 의한 표면 특성은 매끄럽고 깨끗하였다. 따라서 이러한 기능성 코팅 시스템은 플라스틱 렌즈 생산의 공정 단순화와 효과적 생산에 적용 가능할 것으로 본다.
상대적으로 무른 렌즈의 경우 표면의 기계적 성질과 광학적 성능을 개선하기 위해 하드코팅이 필요하다. 하드코팅으로서 졸-겔 공정에 의한 열경화형 유-무기 하이브리드 코팅은 다양한 기재에 기능성을 부여하는데 이용될 수 있다.
본 연구에서는 플라스틱 렌즈의 표면특성과 광학적 특성을 개선하기위해 하이브리드 물질로 3-글리시드옥시프로필트리메톡시실란(GPTS), 메틸트리메톡시실란(MTMS) 및 테트라에틸 오소실리케이트(TEOS)를 사용하였고, 흐름코팅(flow coating)을 실시하여 140℃에서 4시간 열경화하였다. 3400cm^(-1)에서 SiOH의 O-H 신축진동과 1110-1030cm^(-1)에서 Si-O-Si 비대칭 굽힘운동에 의해 나타난 IR특성으로 보아 졸-겔에 의한 코팅을 확인할 수 있었다. GPTS, MTMS와 TEOS의 몰 비가 1 : 1 : 2일 때 최적의 표면특성을 보였으며, 이 코팅 시스템을 자외선(UV)차단 및 광변색 코팅에 적용하였다.
자외선 차단 코팅을 위하여 2-(2-하이드록시-5-메틸 펜틸)벤조트리아졸 (UV P), 2-(2'-하이드록시-5'-테트-옥틸펜닐)-벤조트리아졸 (UV 329) 및 2-하이드록시-4-옥톡시 벤조페논 (UV 531)을 자외선 흡수제로서 무게단위 0.5-4%로 사용하였다. PMMA, CR 39 및 PC 기재에서 자외선 차단 코팅을 하여 그 특성을 조사하였다. 모든 자외선 흡수제에서 사용된 양의 증가에 따라 자외선 투과도는 감소하였으며, 특히 PMMA에서는 그 효과가 가장 우수하였고, CR 39에서도 자외선 차단 효과를 보였다. 자외선 차단 코팅을 한 CR 39렌즈에서는 부착력, 내온수성 및 내약품성이 우수하였고, 4H의 연필경도를 보였으나, 내마모성은 좋지 않았다. 주사전자현미경(SEM)에 의한 관찰에서 표면은 균일하였으며 어떤 잔금도 보이지 않았다.
광변색 코팅을 위하여 하이브리드 코팅액에 광변색 물질로 스피로나프토옥사진 계열과 나프토피란 계열을 무게단위 3% 사용하여 청, 적, 황, 녹색을 띤 검정(graphite) 및 자색으로 변색되는 렌즈를 제조하였다. 모든 광변색 렌즈에서 자외선 조사 후에는 적색이동과 농색효과가 관찰되었다. 광변색 렌즈의 퇴색 반감기는 3-5분이었다. 연필 경도는 4-5H, 내마모성은 1-2등급이었으며, 내온수성과 아세톤 및 에탄올에 대한 내약품성 모두 우수하였다. SEM에 의한 표면 특성은 매끄럽고 깨끗하였다. 따라서 이러한 기능성 코팅 시스템은 플라스틱 렌즈 생산의 공정 단순화와 효과적 생산에 적용 가능할 것으로 본다.
Hard coatings are necessary to improve mechanical durability and optical performance of the surface of relatively soft lenses. Thermally curable organic-inorganic hybrid coatings based on a sol-gel process can be applied to various substrates as a type of hard coatings in order to guarantee certain ...
Hard coatings are necessary to improve mechanical durability and optical performance of the surface of relatively soft lenses. Thermally curable organic-inorganic hybrid coatings based on a sol-gel process can be applied to various substrates as a type of hard coatings in order to guarantee certain functionalities.
This study applied 3-glycidoxypropyltrimethoxysilane (GPTS), methyltrimethoxysilane (MTMS), and tetraethyl orthosilicate (TEOS) as hybrid materials with their molar ratio to improve the surface and optical characteristics of plastic lenses and performed a thermal curing process at 140℃ over 4 hours after completing a flow coating process. It was possible to verify sol-gel based coatings due to the IR characteristics caused by O-H stretching vibrations at 3400cm^(-1) and Si-O-Si asymmetric bending motions at 1110-1030cm^(-1). The optimum surface characteristics were obtained when the moral ratio of GPTS, MTMS, and TEOS was formulated as 1 : 1 : 2, respectively. Also, this coating system was applied to UV blocking coatings and photochromic coatings on lenses.
A 0.5-4 wt. % of 2-(2-Hydroxy-5-methyl phenyl) benzotriazole (UV P), 2-(2'-Hydroxy-5'-tert-octylphenyl)-benzotriazole (UV 329), and 2-Hydroxy- 4-octoxy benzophenone (UV 531) were applied as UV absorbers to establish UV blocking coatings. Also, the characteristics of the UV blocking coatings applied to PMMA, CR 39, and PC substrates. The transmission of UV light decreased in all UV absorbers according to the increase in absorbers. In the case of the PMMA, in particular, represented the highest UV blocking effect, and the CR 39 showed a certain UV blocking effect. The CR 39 lens applied by UV blocking coatings showed excellent adhesion, hot water resistance, and chemical resistance, but it represented poor abrasion resistance even though it showed a 4H level of pencil hardness. From the obtained SEM images, the surface was smooth and free of cracks.
In photochromic coatings, a 3 wt. % of spironaphthooxazines and naphthopyrans were used as photochromic dyes in a hybrid coating solution in order to fabricate lenses in which their colors can be represented as blue, red, yellow, and green appeared black (graphite) and violet. In of all photochromic lenses, bathochromic shift and hyperchromic effect were observed after applying UV irradiation. The half-fading time of photochromic lenses was ranged as 3-9 min. Also, the pencil hardness and abrasion resistance of the lenses were 4-5H and grade ranged by 1-2, respectively. Moreover, the lenses showed excellent characteristics in hot water resistance and chemical resistance for acetone and ethanol. The surface characteristics observed by SEM images showed smooth and clean. Therefore, the functional coating system investigated in this study can be applied to perform a simple and effective production process in plastic lens production facilities.
Hard coatings are necessary to improve mechanical durability and optical performance of the surface of relatively soft lenses. Thermally curable organic-inorganic hybrid coatings based on a sol-gel process can be applied to various substrates as a type of hard coatings in order to guarantee certain functionalities.
This study applied 3-glycidoxypropyltrimethoxysilane (GPTS), methyltrimethoxysilane (MTMS), and tetraethyl orthosilicate (TEOS) as hybrid materials with their molar ratio to improve the surface and optical characteristics of plastic lenses and performed a thermal curing process at 140℃ over 4 hours after completing a flow coating process. It was possible to verify sol-gel based coatings due to the IR characteristics caused by O-H stretching vibrations at 3400cm^(-1) and Si-O-Si asymmetric bending motions at 1110-1030cm^(-1). The optimum surface characteristics were obtained when the moral ratio of GPTS, MTMS, and TEOS was formulated as 1 : 1 : 2, respectively. Also, this coating system was applied to UV blocking coatings and photochromic coatings on lenses.
A 0.5-4 wt. % of 2-(2-Hydroxy-5-methyl phenyl) benzotriazole (UV P), 2-(2'-Hydroxy-5'-tert-octylphenyl)-benzotriazole (UV 329), and 2-Hydroxy- 4-octoxy benzophenone (UV 531) were applied as UV absorbers to establish UV blocking coatings. Also, the characteristics of the UV blocking coatings applied to PMMA, CR 39, and PC substrates. The transmission of UV light decreased in all UV absorbers according to the increase in absorbers. In the case of the PMMA, in particular, represented the highest UV blocking effect, and the CR 39 showed a certain UV blocking effect. The CR 39 lens applied by UV blocking coatings showed excellent adhesion, hot water resistance, and chemical resistance, but it represented poor abrasion resistance even though it showed a 4H level of pencil hardness. From the obtained SEM images, the surface was smooth and free of cracks.
In photochromic coatings, a 3 wt. % of spironaphthooxazines and naphthopyrans were used as photochromic dyes in a hybrid coating solution in order to fabricate lenses in which their colors can be represented as blue, red, yellow, and green appeared black (graphite) and violet. In of all photochromic lenses, bathochromic shift and hyperchromic effect were observed after applying UV irradiation. The half-fading time of photochromic lenses was ranged as 3-9 min. Also, the pencil hardness and abrasion resistance of the lenses were 4-5H and grade ranged by 1-2, respectively. Moreover, the lenses showed excellent characteristics in hot water resistance and chemical resistance for acetone and ethanol. The surface characteristics observed by SEM images showed smooth and clean. Therefore, the functional coating system investigated in this study can be applied to perform a simple and effective production process in plastic lens production facilities.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.