열팽창성 마이크로캡슐을 현탁중합에 의해 제조하였다. 내부 물질로는 휘발성 물질인 이소펜탄을 사용하였고 외부물질로 사용된 고분자 물질로는 vinyl계 단량체를 사용하였다. 현탁중합시 각 단량체의 종류와 상대 성분비율, 교반속도, 보조안정제의 첨가량에 따라 실험을 하였다. 입자 크기는 SEM으로 관찰하였고 유리전이온도 및 발포제의 함량은 TGA와 DSC로 관찰하였다. 발포는 입자 5㎖를 약 2~4분간 130~170℃로 발포시켜 메스실린더로 관찰하였다. 단량체의 종류는 염화비닐리덴 ...
열팽창성 마이크로캡슐을 현탁중합에 의해 제조하였다. 내부 물질로는 휘발성 물질인 이소펜탄을 사용하였고 외부물질로 사용된 고분자 물질로는 vinyl계 단량체를 사용하였다. 현탁중합시 각 단량체의 종류와 상대 성분비율, 교반속도, 보조안정제의 첨가량에 따라 실험을 하였다. 입자 크기는 SEM으로 관찰하였고 유리전이온도 및 발포제의 함량은 TGA와 DSC로 관찰하였다. 발포는 입자 5㎖를 약 2~4분간 130~170℃로 발포시켜 메스실린더로 관찰하였다. 단량체의 종류는 염화비닐리덴 공중합체, 아크릴노니트릴 공중합체, 아크릴로니트릴-메타크릴로 니트릴 공중합체를 하였다. 염화비닐리덴과 아크릴노니트릴(AN) 공중합체는 AN이 염화비닐리덴보다 함량이 많을수록 더 많은 발포가 일어났고 고온에서 발포가 많이 되었다. 염화비닐리덴이 많을수록 저온에서 발포가 많이 됨을 알 수 있었다. 교반속도는 180rpm에서 발포가 많이 되었다. 평균 발포는 약 20~35㎖ 정도 되었다. AN-MAN의 공중합체는 약 9~11㎖ 정도로 염화비닐리덴 공중합체와 비교하여 적은 발포가 일어났지만 고온에서 발포가 많이 되었다. AN만 이용한 공중합체가 최대 45㎖ 까지 발포가 되어 가장 많이 부풀어 올랐으나 재현성은 다른 공중합체에 비해 떨어졌다. SEM관찰 결과 AN만을 이용한 공중합체의 입자크기는 5~10㎛ 이고 발포는 40~70㎛ 까지 되었다. 입자들은 아주 작아서 포도송이처럼 조밀하게 붙어있는 모습이 관찰되었고 염화비닐리덴 공중합체는 단량체의 성분에 따라 다르게 나타났다. 크기는 10~40㎛부터 50~70㎛ 정도로 나타났고 발포는 30~100㎛부터180~260㎛ 까지 되었다. 입자들은 조금 커서 AN만을 이용한 공중합체와는 달리 각각 개별적인 입자들이 만들어졌고 고르게 발포되었다. AN-MAN 공중합체는 위의 두공중합체의 중간크기와 모양을 형성하였다. TGA분석결과 AN만을 이용한 공중합체는 10%의 펜탄을 함유하였고 염화비닐리덴 공중합체는 약 30%의 펜탄을 함유하여 많은 펜탄이 함유함을 알 수 있었다. DSC분석 결과 유리전이온도와 팽창시작온도가 비슷함을 알 수 있었다.
열팽창성 마이크로캡슐을 현탁중합에 의해 제조하였다. 내부 물질로는 휘발성 물질인 이소펜탄을 사용하였고 외부물질로 사용된 고분자 물질로는 vinyl계 단량체를 사용하였다. 현탁중합시 각 단량체의 종류와 상대 성분비율, 교반속도, 보조안정제의 첨가량에 따라 실험을 하였다. 입자 크기는 SEM으로 관찰하였고 유리전이온도 및 발포제의 함량은 TGA와 DSC로 관찰하였다. 발포는 입자 5㎖를 약 2~4분간 130~170℃로 발포시켜 메스실린더로 관찰하였다. 단량체의 종류는 염화비닐리덴 공중합체, 아크릴노니트릴 공중합체, 아크릴로니트릴-메타크릴로 니트릴 공중합체를 하였다. 염화비닐리덴과 아크릴노니트릴(AN) 공중합체는 AN이 염화비닐리덴보다 함량이 많을수록 더 많은 발포가 일어났고 고온에서 발포가 많이 되었다. 염화비닐리덴이 많을수록 저온에서 발포가 많이 됨을 알 수 있었다. 교반속도는 180rpm에서 발포가 많이 되었다. 평균 발포는 약 20~35㎖ 정도 되었다. AN-MAN의 공중합체는 약 9~11㎖ 정도로 염화비닐리덴 공중합체와 비교하여 적은 발포가 일어났지만 고온에서 발포가 많이 되었다. AN만 이용한 공중합체가 최대 45㎖ 까지 발포가 되어 가장 많이 부풀어 올랐으나 재현성은 다른 공중합체에 비해 떨어졌다. SEM관찰 결과 AN만을 이용한 공중합체의 입자크기는 5~10㎛ 이고 발포는 40~70㎛ 까지 되었다. 입자들은 아주 작아서 포도송이처럼 조밀하게 붙어있는 모습이 관찰되었고 염화비닐리덴 공중합체는 단량체의 성분에 따라 다르게 나타났다. 크기는 10~40㎛부터 50~70㎛ 정도로 나타났고 발포는 30~100㎛부터180~260㎛ 까지 되었다. 입자들은 조금 커서 AN만을 이용한 공중합체와는 달리 각각 개별적인 입자들이 만들어졌고 고르게 발포되었다. AN-MAN 공중합체는 위의 두공중합체의 중간크기와 모양을 형성하였다. TGA분석결과 AN만을 이용한 공중합체는 10%의 펜탄을 함유하였고 염화비닐리덴 공중합체는 약 30%의 펜탄을 함유하여 많은 펜탄이 함유함을 알 수 있었다. DSC분석 결과 유리전이온도와 팽창시작온도가 비슷함을 알 수 있었다.
The Thermal Expandable microcapsules were prepared by a suspension polymerization, used iso-pentane as a core and vinyl group monomer as a polymeric shell. In the preparation the influence of monomer type and rate, agitation speed, added volume of aid stabilizer on the character of the particle was ...
The Thermal Expandable microcapsules were prepared by a suspension polymerization, used iso-pentane as a core and vinyl group monomer as a polymeric shell. In the preparation the influence of monomer type and rate, agitation speed, added volume of aid stabilizer on the character of the particle was investigated. Particle size is observated by a SEM, glass transition and contents of blowing agent was observated by TGA and DSC. The Expansion is surveyed by measuring cylinder volume that particle of 5㎖ expanded at 130℃ ~150℃ for 2~4 minutes. Monomer type was used Vinyliden Chloride copolymer, Acrylonitrile copolymer, Acrylonitrile(AN)-co-Methacylonit rile(MAN). The More AN rather than Vinyliden Chloride, the More expansion occurred and in hige temperature. The stir speed had much expansion in 180rpm. Average expansion became 20~35㎖. Copolymer of AN rised up the most expansion up to 45㎖ In resulting view of SEM the particle size of AN copolymer was 5~10㎛. When the particle is expanded, the particle size had 40~70㎛ This particle attached each otherso that they are very small. Vinyliden Chloride copolymer particle size had 50~70㎛ and expanded up to 170~200㎛. Even though this particle is very large size, they are made of respectively particle. In the analysis of TGA, AN copolymer and Vinyliden Chloride copolymer has contents of iso-pentane of 10wt%.
The Thermal Expandable microcapsules were prepared by a suspension polymerization, used iso-pentane as a core and vinyl group monomer as a polymeric shell. In the preparation the influence of monomer type and rate, agitation speed, added volume of aid stabilizer on the character of the particle was investigated. Particle size is observated by a SEM, glass transition and contents of blowing agent was observated by TGA and DSC. The Expansion is surveyed by measuring cylinder volume that particle of 5㎖ expanded at 130℃ ~150℃ for 2~4 minutes. Monomer type was used Vinyliden Chloride copolymer, Acrylonitrile copolymer, Acrylonitrile(AN)-co-Methacylonit rile(MAN). The More AN rather than Vinyliden Chloride, the More expansion occurred and in hige temperature. The stir speed had much expansion in 180rpm. Average expansion became 20~35㎖. Copolymer of AN rised up the most expansion up to 45㎖ In resulting view of SEM the particle size of AN copolymer was 5~10㎛. When the particle is expanded, the particle size had 40~70㎛ This particle attached each otherso that they are very small. Vinyliden Chloride copolymer particle size had 50~70㎛ and expanded up to 170~200㎛. Even though this particle is very large size, they are made of respectively particle. In the analysis of TGA, AN copolymer and Vinyliden Chloride copolymer has contents of iso-pentane of 10wt%.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.