소나무재선충병 피해지의 효율적인 관리를 위한 피해지역 산림환경 분석과 목재 활용도 및 맞춤형 방제 분석 결과는 다음과 같다. 1. 소나무재선충병 피해지의 임상 및 입지조건 1) 소나무재선충병 피해지의 산림환경 소나무재선충병 피해지역의 임상 및 입지인자에 위한 피해량의 추정식은 Y=29.074 + 47.034X41(건습도) - 57.649X16(지형) + 24.909X20(경사) 로 도출되었다. 2) 산림식생구조분석 산림식생구조분석에서는 추후 상층으로 성장할 중층의 중요치는 피해지역에서는 ...
소나무재선충병 피해지의 효율적인 관리를 위한 피해지역 산림환경 분석과 목재 활용도 및 맞춤형 방제 분석 결과는 다음과 같다. 1. 소나무재선충병 피해지의 임상 및 입지조건 1) 소나무재선충병 피해지의 산림환경 소나무재선충병 피해지역의 임상 및 입지인자에 위한 피해량의 추정식은 Y=29.074 + 47.034X41(건습도) - 57.649X16(지형) + 24.909X20(경사) 로 도출되었다. 2) 산림식생구조분석 산림식생구조분석에서는 추후 상층으로 성장할 중층의 중요치는 피해지역에서는 졸참나무, 갈참나무, 굴피나무, 굴참나무, 때죽나무의 중요치가 높게 나타났다. 따라서 해송과 소나무가 소나무재선충병으로 인하여 계속적인 벌채가 진행된다면 참나무계통의 수종이 우점하리라 판단된다. 2. 감염목 및 훈증목의 활용 1) 감염목의 활용성 분석 침전처리 후의 소나무재선충은 소나무와 해송의 수종에 관계없이 목초액 및 살선충제는 21일째 , 바닷물 침전은 30일째 재선충의 밀도 감소 및 활력 감소가 나타났다. 재추출된 재선충을 건전한 나무에 인위적인 접종 후 6개월경과 후 까지 아무런 발병이 되지 않았으며, 목재강도시험에서도 목재로서의 활용성이 가능하다고 판단된다. 2) 훈증목의 활용성 분석 훈증목의 소나무재선충 밀도변화는 수종에 관계없이 3개월 까지는 소나무재선충이 검출되었으며, 그 이후에 출현하는 재선충은 유사 선충으로 판명되었다. 잔류농약은 메탐소디움이 3개월경과 후 검출되지 않았으며, 목재강도 시험에서도 2년이 지난 훈증목의 압축강도는 크게 감소하지 않았다. 따라서 소나무재선충병으로 고사한 훈증목은 3개월이 지나면 사용할 수 있다고 판단된다. 3. GIS을 활용한 맞춤형 방제 방안 1) 소나무재선충병 방제법 선호도 조사 소나무재선충병의 방제법에 관한 선호도 조사 결과 파쇄방제가 가장 높았으며, 훈증, 소각, 나무주사의 순으로 나타났으며, 선택이유는 첫째 방제효과이며 두 번째로는 작업의 편리함으로 나타났다. 2) 방제법 선택 시 고려하는 항목 방제법 선택 시 고려하는 항목은 파쇄처리, 소각처리 및 침전처리에서는 도로접근성, 훈증처리에서는 피해본수, 나무주사에서는 경급을 방제법 선택에서 우선적으로 고려하는 항목으로 판단된다. 이번 연구를 통하여 소나무재선충병 피해지역의 특성은 토양의 건습도와 관련성이 높고, 피해목은 침전처리 및 2년의 시간이 경과하더라도 충분히 활용히 가능하며, GIS을 활용한 맞춤형 방제법 구축은 현장점검 결과가 양호하여 방제법 선택에 활용이 가능하다고 사료된다.
소나무재선충병 피해지의 효율적인 관리를 위한 피해지역 산림환경 분석과 목재 활용도 및 맞춤형 방제 분석 결과는 다음과 같다. 1. 소나무재선충병 피해지의 임상 및 입지조건 1) 소나무재선충병 피해지의 산림환경 소나무재선충병 피해지역의 임상 및 입지인자에 위한 피해량의 추정식은 Y=29.074 + 47.034X41(건습도) - 57.649X16(지형) + 24.909X20(경사) 로 도출되었다. 2) 산림식생구조분석 산림식생구조분석에서는 추후 상층으로 성장할 중층의 중요치는 피해지역에서는 졸참나무, 갈참나무, 굴피나무, 굴참나무, 때죽나무의 중요치가 높게 나타났다. 따라서 해송과 소나무가 소나무재선충병으로 인하여 계속적인 벌채가 진행된다면 참나무계통의 수종이 우점하리라 판단된다. 2. 감염목 및 훈증목의 활용 1) 감염목의 활용성 분석 침전처리 후의 소나무재선충은 소나무와 해송의 수종에 관계없이 목초액 및 살선충제는 21일째 , 바닷물 침전은 30일째 재선충의 밀도 감소 및 활력 감소가 나타났다. 재추출된 재선충을 건전한 나무에 인위적인 접종 후 6개월경과 후 까지 아무런 발병이 되지 않았으며, 목재강도시험에서도 목재로서의 활용성이 가능하다고 판단된다. 2) 훈증목의 활용성 분석 훈증목의 소나무재선충 밀도변화는 수종에 관계없이 3개월 까지는 소나무재선충이 검출되었으며, 그 이후에 출현하는 재선충은 유사 선충으로 판명되었다. 잔류농약은 메탐소디움이 3개월경과 후 검출되지 않았으며, 목재강도 시험에서도 2년이 지난 훈증목의 압축강도는 크게 감소하지 않았다. 따라서 소나무재선충병으로 고사한 훈증목은 3개월이 지나면 사용할 수 있다고 판단된다. 3. GIS을 활용한 맞춤형 방제 방안 1) 소나무재선충병 방제법 선호도 조사 소나무재선충병의 방제법에 관한 선호도 조사 결과 파쇄방제가 가장 높았으며, 훈증, 소각, 나무주사의 순으로 나타났으며, 선택이유는 첫째 방제효과이며 두 번째로는 작업의 편리함으로 나타났다. 2) 방제법 선택 시 고려하는 항목 방제법 선택 시 고려하는 항목은 파쇄처리, 소각처리 및 침전처리에서는 도로접근성, 훈증처리에서는 피해본수, 나무주사에서는 경급을 방제법 선택에서 우선적으로 고려하는 항목으로 판단된다. 이번 연구를 통하여 소나무재선충병 피해지역의 특성은 토양의 건습도와 관련성이 높고, 피해목은 침전처리 및 2년의 시간이 경과하더라도 충분히 활용히 가능하며, GIS을 활용한 맞춤형 방제법 구축은 현장점검 결과가 양호하여 방제법 선택에 활용이 가능하다고 사료된다.
The results of analysis on forest environment, the utilization of trees, and customized control for efficient management in the damaged areas by pine wilt disease are summarized as followings. characteristic 1.Characteristic of damaged areas by pine wilt disease A.Forest environment of damaged areas...
The results of analysis on forest environment, the utilization of trees, and customized control for efficient management in the damaged areas by pine wilt disease are summarized as followings. characteristic 1.Characteristic of damaged areas by pine wilt disease A.Forest environment of damaged areas by pine wilt disease An equation for the damage volume by forest and location conditions of damaged areas by pine wilt disease is as follows; Y(Damage volume) = 29.074 + 47.034X41(Degree of humidity) - 57.649X16(Topography) + 24.909X20(Slope) B.Structural analysis of forest vegetation The structural analysis of forest vegetation showed that in the damaged area, Quercus serrata , Q. aliena, Platycarya strobilacea , Q. variabilis and Styrax japonica indicated high significance to middle story that would grow to upper story later. As, Pinus densiflora and P. thunbergii are cutted continally due to pine wilt disease, the damageed areas are able to change to Quercus spp. 2.The utilization of damaged trees or infected trees by pine wilt disease A.Analysis on utilization of infected trees Regardless of species of Pinus thunbergii or P. densiflora, pine wood nematode after soaking showed the reduction of No. of individual and vitality of pine wood nematodes from the 21stday in the case of soaking wood vinegar or nematicide, and from the 30th day in the case of sea water. When the re-extracted pine wood nematode was artificially injected to healthy tree, no diseases were found until six months passed, and the trees were decided to have utility as wood in the wood strength test. B.Analysis on utilization of fumigation timber Change of No. of individual in pine wood nematode in the fumigation timber, pine wood nematodes were extracted until three months regardless of species, and pine wood nematode that appeared afterwards were determined as similar nematodes. Pesticide residue was not found since then three months after metam sodium was treated. The wood strength test showed that compressive strength of fumigation timber did not considerably decrease even after two years. Thus, it was inferred that fumigation timbers died by pine wilt disease could be used after three months. 3.Proposal of customized control by GIS A.Preference survey for control methods of pine wilt disease According to the preference survey for control methods of pine wilt disease, it was found that chipping method was the most preferred, followed by fumigation, burning, and tree injection, and the reasons for preference were the effect of control and convenience. B.Considerations in selecting a control method In selecting the control methods, road approach was considered for chipping, burning, and soaking the number of damaged trees for fumigation and diameter is considered for tree injection.
The results of analysis on forest environment, the utilization of trees, and customized control for efficient management in the damaged areas by pine wilt disease are summarized as followings. characteristic 1.Characteristic of damaged areas by pine wilt disease A.Forest environment of damaged areas by pine wilt disease An equation for the damage volume by forest and location conditions of damaged areas by pine wilt disease is as follows; Y(Damage volume) = 29.074 + 47.034X41(Degree of humidity) - 57.649X16(Topography) + 24.909X20(Slope) B.Structural analysis of forest vegetation The structural analysis of forest vegetation showed that in the damaged area, Quercus serrata , Q. aliena, Platycarya strobilacea , Q. variabilis and Styrax japonica indicated high significance to middle story that would grow to upper story later. As, Pinus densiflora and P. thunbergii are cutted continally due to pine wilt disease, the damageed areas are able to change to Quercus spp. 2.The utilization of damaged trees or infected trees by pine wilt disease A.Analysis on utilization of infected trees Regardless of species of Pinus thunbergii or P. densiflora, pine wood nematode after soaking showed the reduction of No. of individual and vitality of pine wood nematodes from the 21stday in the case of soaking wood vinegar or nematicide, and from the 30th day in the case of sea water. When the re-extracted pine wood nematode was artificially injected to healthy tree, no diseases were found until six months passed, and the trees were decided to have utility as wood in the wood strength test. B.Analysis on utilization of fumigation timber Change of No. of individual in pine wood nematode in the fumigation timber, pine wood nematodes were extracted until three months regardless of species, and pine wood nematode that appeared afterwards were determined as similar nematodes. Pesticide residue was not found since then three months after metam sodium was treated. The wood strength test showed that compressive strength of fumigation timber did not considerably decrease even after two years. Thus, it was inferred that fumigation timbers died by pine wilt disease could be used after three months. 3.Proposal of customized control by GIS A.Preference survey for control methods of pine wilt disease According to the preference survey for control methods of pine wilt disease, it was found that chipping method was the most preferred, followed by fumigation, burning, and tree injection, and the reasons for preference were the effect of control and convenience. B.Considerations in selecting a control method In selecting the control methods, road approach was considered for chipping, burning, and soaking the number of damaged trees for fumigation and diameter is considered for tree injection.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.