건설 정보화와 관련해서 건설관리에 사용되는 데이터들은 하나로 취합하는 작업이나 단순히 정보를 시각화하는 것에 중점을 두고 있는 국내 현실은 기본적인 정보체계가 부적절하여 전체 건설 프로세스 상에서 관리할 수 있는 시스템의 개발이 매우 필요하다. 이에 본 연구에서는 건설 결과물의 부위를 대상으로 한 EBS를 중심으로 WBS와 CBS를 연계시켜 건설의 각 단계에서 발생된 정보를 축적함으로써 건설 단계별 전반적인 정보의 흐름을 효과적으로 구현할 수 있는 BIM을 적용한 건설정보 통합시스템을 개발하고자 하였다. 본 연구를 통해 도출된 결론은 다음과 같다. (1) 국내 PMIS의 사례에서 BIM개념의 ...
건설 정보화와 관련해서 건설관리에 사용되는 데이터들은 하나로 취합하는 작업이나 단순히 정보를 시각화하는 것에 중점을 두고 있는 국내 현실은 기본적인 정보체계가 부적절하여 전체 건설 프로세스 상에서 관리할 수 있는 시스템의 개발이 매우 필요하다. 이에 본 연구에서는 건설 결과물의 부위를 대상으로 한 EBS를 중심으로 WBS와 CBS를 연계시켜 건설의 각 단계에서 발생된 정보를 축적함으로써 건설 단계별 전반적인 정보의 흐름을 효과적으로 구현할 수 있는 BIM을 적용한 건설정보 통합시스템을 개발하고자 하였다. 본 연구를 통해 도출된 결론은 다음과 같다. (1) 국내 PMIS의 사례에서 BIM개념의 3D 도면을 바탕으로 건설정보를 구축하여 운영, 관리하는 사례는 없었으며, 국내 3D CAD와 통합시스템은 설계단계에서 많은 시간의 입력작업이 필요로 하고, 입력된 3D 도면을 시공단계에서 잘 활용할 수 있는 공유체계와 통합 전산화 시스템이 미비한 것으로 파악되어, 건설정보를 연계시키고 활용할 수 있는 실무적인 시스템이 필요하다. (2) 건설프로젝트 기획단계에서 건설정보는 통합시스템을 사용하여 현장정보가 잘 구축된다면 새로운 건설사업을 시작하는데 중요한 건설정보를 제공하며, 설계단계에서 발생하는 설계도면이외의 설계정보는 건물의 부위별 구조, 형상, 재료, 마감 정보 등이 3D 도면과 함께 통합 반영되도록 하였기에 시공단계에서 설계정보가 활용될 수 있을 것으로 판단된다. (3) 건설사업의 각 단계별 업무내용의 조사를 통해 발생되는 건설정보를 분석하여 단계별 업무모델을 UML 표현기법을 사용하여 도식화하였고, 이를 바탕으로 설계 및 시공 정보에 대한 통합정보 객체를 모델링하였다. 또한 통합정보의 객체 모델은 설계 및 시공 단계에서 발생하는 복합적인 건설정보를 담을 수 있으며, 각 단계에서 필요한 정보를 공유할 수 있을 것으로 판단된다. (4) 건설의 전 단계에서 발생하는 건설정보를 3D에 의한 건물의 부위객체에 위치정보를 부여하여 EBS로 체계화하고, 여기에 WBS와 CBS를 연계하여 건설의 각 단계별로 통합하여 관리할 수 있는 개념적인 CIBS 모델을 개발하여 설계, 시공, 하자관리 단계에서 발생하는 건설정보를 통합하도록 하였다. (5) 개발된 CIBS 모델은 설계, 시공, 하자정보를 입력하고 수정, 검색하는데 매체가 되는 요소로 3D CAD의 3D 부위객체를 기준으로 연계하였고, EBS의 단위부위를 기준으로 위치정보와 객체의 치수정보를 통하여 WBS와 CBS로 연계되어 부위객체에 대한 시각적 표현이 가능하고 건설프로세스의 모든 참여자가 건설정보를 공유할 수 있도록 하였다. (6) 시공단계와 하자관리단계의 데이터베이스를 설계하고 설계, 시공, 하자관리 단계에서 건설정보를 입력 및 관리할 수 있는 건설정보 통합시스템의 원형을 개발하여, 설계단계는 3차원 부재에 부위코드로 시공단계와 연계되고, 시공단계는 부위코드에 의해 시공정보를 입력하고 관리할 수 있고, 하자관리단계는 입력되어진 설계 및 시공정보를 바탕으로 하자정보를 입력하여 관리되도록 하였다. (7) 공동주택을 대상으로 시공사례를 선정하여 3D CAD를 이용한 3D 모델을 입력하고 설계, 시공, 하자관리 단계 별로 건설정보를 입력하여 통합시스템에 적용하여 개발된 시스템의 유효성을 검증하였다. 이에 본 연구에서 개발된 건설정보 통합 원형 시스템에 입력된 건설정보는 설계, 시공, 하자관리 중 어느 단계에서든지 접근이 가능한 것을 알 수 있었으며 새로운 건설사업을 시작하는데 중요한 건설정보를 제공할 것으로 판단된다. 건설정보 통합시스템을 활용할 경우, 건설정보가 지속적으로 축적되고 갱신된 데이터베이스 구축으로 건물부위에 관련된 정보를 건설프로젝트 참여자들이 효과적으로 활용할 수 있을 것으로 사료된다. 또한, 건설정보 통합시스템은 건물의 준공 후 건물부위와 연계된 건설정보가 저장되기 때문에 설계 및 시공 등 원하는 정보로의 접근이 용이하며, 하자발생시 원인 파악이 용이하고, 건물정보의 통합된 데이터베이스가 구축되어 관리가 효율적으로 이루어질 수 있다. 또한 축적된 정보가 다음공사로 피드백됨으로서 이전의 문제점이나 개선 사항을 미리 검토할 수 있을 것으로 판단된다. 앞으로 BIM기반의 통합시스템이 활용되기 위해서 설계도면의 입력은 3D CAD를 사용해서 구축되어져야 할 것이며, 본 연구에서 깊이 다루지 못했던 현장관리를 위한 기존 PMIS와 본 연구의 결과물을 접목시킨다면 보다 폭넓고 효율적인 건설관리를 수행할 수 있을 것이다. 하지만 기존 PMIS의 체계가 개발회사나 건설사별로 많은 부분이 상이하며 건설정보의 데이터 베이스 구조가 틀리기 때문에 많은 문제점을 안고 있다.
건설 정보화와 관련해서 건설관리에 사용되는 데이터들은 하나로 취합하는 작업이나 단순히 정보를 시각화하는 것에 중점을 두고 있는 국내 현실은 기본적인 정보체계가 부적절하여 전체 건설 프로세스 상에서 관리할 수 있는 시스템의 개발이 매우 필요하다. 이에 본 연구에서는 건설 결과물의 부위를 대상으로 한 EBS를 중심으로 WBS와 CBS를 연계시켜 건설의 각 단계에서 발생된 정보를 축적함으로써 건설 단계별 전반적인 정보의 흐름을 효과적으로 구현할 수 있는 BIM을 적용한 건설정보 통합시스템을 개발하고자 하였다. 본 연구를 통해 도출된 결론은 다음과 같다. (1) 국내 PMIS의 사례에서 BIM개념의 3D 도면을 바탕으로 건설정보를 구축하여 운영, 관리하는 사례는 없었으며, 국내 3D CAD와 통합시스템은 설계단계에서 많은 시간의 입력작업이 필요로 하고, 입력된 3D 도면을 시공단계에서 잘 활용할 수 있는 공유체계와 통합 전산화 시스템이 미비한 것으로 파악되어, 건설정보를 연계시키고 활용할 수 있는 실무적인 시스템이 필요하다. (2) 건설프로젝트 기획단계에서 건설정보는 통합시스템을 사용하여 현장정보가 잘 구축된다면 새로운 건설사업을 시작하는데 중요한 건설정보를 제공하며, 설계단계에서 발생하는 설계도면이외의 설계정보는 건물의 부위별 구조, 형상, 재료, 마감 정보 등이 3D 도면과 함께 통합 반영되도록 하였기에 시공단계에서 설계정보가 활용될 수 있을 것으로 판단된다. (3) 건설사업의 각 단계별 업무내용의 조사를 통해 발생되는 건설정보를 분석하여 단계별 업무모델을 UML 표현기법을 사용하여 도식화하였고, 이를 바탕으로 설계 및 시공 정보에 대한 통합정보 객체를 모델링하였다. 또한 통합정보의 객체 모델은 설계 및 시공 단계에서 발생하는 복합적인 건설정보를 담을 수 있으며, 각 단계에서 필요한 정보를 공유할 수 있을 것으로 판단된다. (4) 건설의 전 단계에서 발생하는 건설정보를 3D에 의한 건물의 부위객체에 위치정보를 부여하여 EBS로 체계화하고, 여기에 WBS와 CBS를 연계하여 건설의 각 단계별로 통합하여 관리할 수 있는 개념적인 CIBS 모델을 개발하여 설계, 시공, 하자관리 단계에서 발생하는 건설정보를 통합하도록 하였다. (5) 개발된 CIBS 모델은 설계, 시공, 하자정보를 입력하고 수정, 검색하는데 매체가 되는 요소로 3D CAD의 3D 부위객체를 기준으로 연계하였고, EBS의 단위부위를 기준으로 위치정보와 객체의 치수정보를 통하여 WBS와 CBS로 연계되어 부위객체에 대한 시각적 표현이 가능하고 건설프로세스의 모든 참여자가 건설정보를 공유할 수 있도록 하였다. (6) 시공단계와 하자관리단계의 데이터베이스를 설계하고 설계, 시공, 하자관리 단계에서 건설정보를 입력 및 관리할 수 있는 건설정보 통합시스템의 원형을 개발하여, 설계단계는 3차원 부재에 부위코드로 시공단계와 연계되고, 시공단계는 부위코드에 의해 시공정보를 입력하고 관리할 수 있고, 하자관리단계는 입력되어진 설계 및 시공정보를 바탕으로 하자정보를 입력하여 관리되도록 하였다. (7) 공동주택을 대상으로 시공사례를 선정하여 3D CAD를 이용한 3D 모델을 입력하고 설계, 시공, 하자관리 단계 별로 건설정보를 입력하여 통합시스템에 적용하여 개발된 시스템의 유효성을 검증하였다. 이에 본 연구에서 개발된 건설정보 통합 원형 시스템에 입력된 건설정보는 설계, 시공, 하자관리 중 어느 단계에서든지 접근이 가능한 것을 알 수 있었으며 새로운 건설사업을 시작하는데 중요한 건설정보를 제공할 것으로 판단된다. 건설정보 통합시스템을 활용할 경우, 건설정보가 지속적으로 축적되고 갱신된 데이터베이스 구축으로 건물부위에 관련된 정보를 건설프로젝트 참여자들이 효과적으로 활용할 수 있을 것으로 사료된다. 또한, 건설정보 통합시스템은 건물의 준공 후 건물부위와 연계된 건설정보가 저장되기 때문에 설계 및 시공 등 원하는 정보로의 접근이 용이하며, 하자발생시 원인 파악이 용이하고, 건물정보의 통합된 데이터베이스가 구축되어 관리가 효율적으로 이루어질 수 있다. 또한 축적된 정보가 다음공사로 피드백됨으로서 이전의 문제점이나 개선 사항을 미리 검토할 수 있을 것으로 판단된다. 앞으로 BIM기반의 통합시스템이 활용되기 위해서 설계도면의 입력은 3D CAD를 사용해서 구축되어져야 할 것이며, 본 연구에서 깊이 다루지 못했던 현장관리를 위한 기존 PMIS와 본 연구의 결과물을 접목시킨다면 보다 폭넓고 효율적인 건설관리를 수행할 수 있을 것이다. 하지만 기존 PMIS의 체계가 개발회사나 건설사별로 많은 부분이 상이하며 건설정보의 데이터 베이스 구조가 틀리기 때문에 많은 문제점을 안고 있다.
Our situation, in terms of construction information, has inappropriate information system because it is focused on either simple visualizing information or gathering data in one on construction management, thus it is necessary to develop system which is able to manage data in whole construction proc...
Our situation, in terms of construction information, has inappropriate information system because it is focused on either simple visualizing information or gathering data in one on construction management, thus it is necessary to develop system which is able to manage data in whole construction process. This study aims to develop integrated construction information system applying BIM which can simulate overall information flow effectively by work type, accumulating information in each process of construction making use of WBS and CBS with EBS whose objects are consisted of constructing results. The results from this study are as follows: (1) The instance of PMIS construction in Korea was surveyed, either operation or management by building construction information with 3D drawing of BIM was not appeared. The result shows that because it needs time in inputting 3D drawings and integration computing system and common system is not well prepared, therefore useful system is needed to be applicable to link construction information based on 3D drawing. (2) Construction information in the planning stage of construction project, if field information is constructed well with integrate system, could supply important information for launching new work. Design information except drawing produced in the design stage is designed to reflect the information of structure by building element, shape, material and finishing with 3D CAD drawing, and thus could be applied to construction stage. (3) Through the job survey and analysis by stage in construction work, job model by stage was visualized with UML method and on the basis of this integrated information element modeling was done on the design and construction information. Element model of integrated information can include complicated construction information caused in the design and construction stage and could use information in common at each stage. (4) Construction information in whole stage was systemized with EBS provided location information with building element by 3D, linking WBS and CBS to this conceptual CIBS model was developed to be able to manage by construction stage so that it can integrate all the construction information in the design, construction and defect management stage. (5) CIBS model was linked on the basis of 3D location element which is used to input, correct and survey the information on design, construction and defect, and was developed to be able to visualize the element, linked to WBS and CBS with location and dimension information based on the unit element of EBS and to use in common all the information. (6) Prototype of construction information integrated system was developed to be able to design database in the construction and defect management stage and to be able to input and manage the construction information in the design, construction and defect management stage. Design stage is linked to construction stage with element code to 3D element, in construction stage construction information could be inputted and managed by element code, and in defect management stage defect information could be inputted and managed based on the design and construction information inputted. (7) Efficiency of the system developed was examined, applying construction information to integrated information system by inputting 3D model, information in each stage through construction field application. As a result, the construction information inputted to construction information integrated prototype developed was appeared that it can be accessed in any stage and could provide important information to launch new construction project. When we make use of construction information integrated system, database of construction information accumulated and revised could be useful and effective to construction participants. In addition, because construction information integrated system can store construction information of element after project completion, it is easy to access the database of either design or construction, to find the cause of defect and to manage by building database continuously. Accumulated information through feedback is reused to next project, can be used for checking problems or something to be improved. In the future, to make use of BIM based integrated system inputting drawing should be built by 3D CAD. Connecting the results of this study with existing PMIS for field management, unfortunately not handled in detail in this study, can give us more useful construction management. However, there exist some problem with different PMIS system by company or different database structure.
Our situation, in terms of construction information, has inappropriate information system because it is focused on either simple visualizing information or gathering data in one on construction management, thus it is necessary to develop system which is able to manage data in whole construction process. This study aims to develop integrated construction information system applying BIM which can simulate overall information flow effectively by work type, accumulating information in each process of construction making use of WBS and CBS with EBS whose objects are consisted of constructing results. The results from this study are as follows: (1) The instance of PMIS construction in Korea was surveyed, either operation or management by building construction information with 3D drawing of BIM was not appeared. The result shows that because it needs time in inputting 3D drawings and integration computing system and common system is not well prepared, therefore useful system is needed to be applicable to link construction information based on 3D drawing. (2) Construction information in the planning stage of construction project, if field information is constructed well with integrate system, could supply important information for launching new work. Design information except drawing produced in the design stage is designed to reflect the information of structure by building element, shape, material and finishing with 3D CAD drawing, and thus could be applied to construction stage. (3) Through the job survey and analysis by stage in construction work, job model by stage was visualized with UML method and on the basis of this integrated information element modeling was done on the design and construction information. Element model of integrated information can include complicated construction information caused in the design and construction stage and could use information in common at each stage. (4) Construction information in whole stage was systemized with EBS provided location information with building element by 3D, linking WBS and CBS to this conceptual CIBS model was developed to be able to manage by construction stage so that it can integrate all the construction information in the design, construction and defect management stage. (5) CIBS model was linked on the basis of 3D location element which is used to input, correct and survey the information on design, construction and defect, and was developed to be able to visualize the element, linked to WBS and CBS with location and dimension information based on the unit element of EBS and to use in common all the information. (6) Prototype of construction information integrated system was developed to be able to design database in the construction and defect management stage and to be able to input and manage the construction information in the design, construction and defect management stage. Design stage is linked to construction stage with element code to 3D element, in construction stage construction information could be inputted and managed by element code, and in defect management stage defect information could be inputted and managed based on the design and construction information inputted. (7) Efficiency of the system developed was examined, applying construction information to integrated information system by inputting 3D model, information in each stage through construction field application. As a result, the construction information inputted to construction information integrated prototype developed was appeared that it can be accessed in any stage and could provide important information to launch new construction project. When we make use of construction information integrated system, database of construction information accumulated and revised could be useful and effective to construction participants. In addition, because construction information integrated system can store construction information of element after project completion, it is easy to access the database of either design or construction, to find the cause of defect and to manage by building database continuously. Accumulated information through feedback is reused to next project, can be used for checking problems or something to be improved. In the future, to make use of BIM based integrated system inputting drawing should be built by 3D CAD. Connecting the results of this study with existing PMIS for field management, unfortunately not handled in detail in this study, can give us more useful construction management. However, there exist some problem with different PMIS system by company or different database structure.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.