본 연구에서는 마이크로캡슐의 벽물질로 urea와 formaldehyde prepolymer를 합성한 후 심물질로 phytoncide를 사용하여 In-situ 중합법으로 마이크로캡슐을 제조하였다. 제조시 적정조건을 구하고 계면활성제의 농도에 따른 비교와 고정 벽물질에 대한 심물질 함량의 변화에 따른 캡슐의 크기, 표면형태, 열적 특성 및 항균특성을 조사한 결과 다음과 같은 결과를 얻었다. 1. ...
본 연구에서는 마이크로캡슐의 벽물질로 urea와 formaldehyde prepolymer를 합성한 후 심물질로 phytoncide를 사용하여 In-situ 중합법으로 마이크로캡슐을 제조하였다. 제조시 적정조건을 구하고 계면활성제의 농도에 따른 비교와 고정 벽물질에 대한 심물질 함량의 변화에 따른 캡슐의 크기, 표면형태, 열적 특성 및 항균특성을 조사한 결과 다음과 같은 결과를 얻었다. 1. FT-IR spectra 제조된 마이크로캡슐의 FT-IR spectrum으로부터 phytoncide oil을 함유한 Urea-Formaldehyde microcapsule의 형성을 확인할 수 있었다. 3300∼3400cm^(-1) 부근의 NH와 1700cm?¹부근의 C=O의 흡수피크가 형성되는 것으로 보아 urea-formaldehyde의 중합체임을 확인하였다(Fig. 8). phytoncide와 microcapsule의 공동 흡수피크로는 2900∼3000cm^(-1)부근과 1800cm^(-1)부근에 나타남을 관찰 할 수 있었다. 2. U-F microcapsule의 입자크기와 분포 계면활성제농도에 따른 입자크기 와 분포는 농도가 증가함에 따라 평균입자의 크기는 감소하나 입자의 균일성을 고려해 볼 때 계면활성제의 농도가 0.5%-1.0%가 가정 적당한 것으로 나타났다. 고정 벽물질에 대한 심물질의 양변화에 따른 입자크기 와 분포는 심물질의 양이 늘어나면서 입자의 크기는 작아지지만 심물질의 양에 비해 벽물질의 양이 너무 작아서 벽막이 얇아 파괴되거나 불균일한 크기의 캡슐들이 만들어졌다. 3. 캡슐의 표면형태 마이크로캡슐의 표면형태는 계면활성제의 농도가 증가함에 따라 캡슐의 입자크기는 작아짐을 알 수 있었고 심대벽비의 변화는 1 : 1쪽으로 갈수록 가장 균일한 형태임을 관찰할 수 있었다. 4. 캡슐의 열적특성 마이크로캡슐의 열적특성은 260℃∼270℃부근에서 흡열피크가 나타났고 이는 260℃∼270℃부근에서 심물질이 방출됨을 알 수 있다. 따라서 제조된 마이크로캡슐은 열에 대한 내구성이 우수하다는 것을 알 수 있다. 5. 캡슐의 가공 및 항균특성 제조된 마이크로캡슐의 항균성을 측정하기 위하여 공시균1-Staphylococcus aureus(ATCC 6538)와 공시균2-Klebsiella pneumoniae(ATCC 4352)을 이용하여 정량적인 균수 측정법으로 항균성을 평가하였다. 0.1% 함유 마이크로캡슐의 균 감소율은 90%수준이고 0.2% 함유의 것은 99.9%이상의 균감소율을 나타내었다(Table 4). 합성된 피톤치드마이크로캡슐을 피혁의 상품성과 물성을 보완하기 위한 천연피혁의 공정인 도장 공정에 적용한 결과 전 공정에서 항균성을 나타내었으며, 특히 도장공정의 마지막 공정인 Top 코팅 공정에서 0.2%을 적용한 결과 항균성 및 가죽의 특성이 우수함을 확인 할 수 있었다.
본 연구에서는 마이크로캡슐의 벽물질로 urea와 formaldehyde prepolymer를 합성한 후 심물질로 phytoncide를 사용하여 In-situ 중합법으로 마이크로캡슐을 제조하였다. 제조시 적정조건을 구하고 계면활성제의 농도에 따른 비교와 고정 벽물질에 대한 심물질 함량의 변화에 따른 캡슐의 크기, 표면형태, 열적 특성 및 항균특성을 조사한 결과 다음과 같은 결과를 얻었다. 1. FT-IR spectra 제조된 마이크로캡슐의 FT-IR spectrum으로부터 phytoncide oil을 함유한 Urea-Formaldehyde microcapsule의 형성을 확인할 수 있었다. 3300∼3400cm^(-1) 부근의 NH와 1700cm?¹부근의 C=O의 흡수피크가 형성되는 것으로 보아 urea-formaldehyde의 중합체임을 확인하였다(Fig. 8). phytoncide와 microcapsule의 공동 흡수피크로는 2900∼3000cm^(-1)부근과 1800cm^(-1)부근에 나타남을 관찰 할 수 있었다. 2. U-F microcapsule의 입자크기와 분포 계면활성제농도에 따른 입자크기 와 분포는 농도가 증가함에 따라 평균입자의 크기는 감소하나 입자의 균일성을 고려해 볼 때 계면활성제의 농도가 0.5%-1.0%가 가정 적당한 것으로 나타났다. 고정 벽물질에 대한 심물질의 양변화에 따른 입자크기 와 분포는 심물질의 양이 늘어나면서 입자의 크기는 작아지지만 심물질의 양에 비해 벽물질의 양이 너무 작아서 벽막이 얇아 파괴되거나 불균일한 크기의 캡슐들이 만들어졌다. 3. 캡슐의 표면형태 마이크로캡슐의 표면형태는 계면활성제의 농도가 증가함에 따라 캡슐의 입자크기는 작아짐을 알 수 있었고 심대벽비의 변화는 1 : 1쪽으로 갈수록 가장 균일한 형태임을 관찰할 수 있었다. 4. 캡슐의 열적특성 마이크로캡슐의 열적특성은 260℃∼270℃부근에서 흡열피크가 나타났고 이는 260℃∼270℃부근에서 심물질이 방출됨을 알 수 있다. 따라서 제조된 마이크로캡슐은 열에 대한 내구성이 우수하다는 것을 알 수 있다. 5. 캡슐의 가공 및 항균특성 제조된 마이크로캡슐의 항균성을 측정하기 위하여 공시균1-Staphylococcus aureus(ATCC 6538)와 공시균2-Klebsiella pneumoniae(ATCC 4352)을 이용하여 정량적인 균수 측정법으로 항균성을 평가하였다. 0.1% 함유 마이크로캡슐의 균 감소율은 90%수준이고 0.2% 함유의 것은 99.9%이상의 균감소율을 나타내었다(Table 4). 합성된 피톤치드마이크로캡슐을 피혁의 상품성과 물성을 보완하기 위한 천연피혁의 공정인 도장 공정에 적용한 결과 전 공정에서 항균성을 나타내었으며, 특히 도장공정의 마지막 공정인 Top 코팅 공정에서 0.2%을 적용한 결과 항균성 및 가죽의 특성이 우수함을 확인 할 수 있었다.
Recently, domestic leather industry has some trouble because of international techniques competition and growth of the developing countries. Leather is a material created through the tanning of hides and skins of animals, primarily cattlehide. The tanning process converts the putrescible skin in...
Recently, domestic leather industry has some trouble because of international techniques competition and growth of the developing countries. Leather is a material created through the tanning of hides and skins of animals, primarily cattlehide. The tanning process converts the putrescible skin into a durable, long-lasting and versatile natural material for various uses. Products made of leather must have antimicrobial treatment. Otherwise these are generating rhinitis, bronchitis and atopic dermatities for old people and infant. Because it provied the perfect environment for the growth for house dust mites and harmful insects. It is expected that urea-formaldehyde microcapsules containing phytoncide oil shall have the antimicrobial activity on the leather product. Urea-formaldehyde microcapsules containing phytoncide oil were prepared by in-situ polymerization. Particle size distribution, surface morphology, thermal stability, and antimicrobial activity of the result and microcapsule were investigated. The results obtained in this study were summarized as follows: 1. As the increasing concentration of surfactant and weight ratio of core material to wall material is 1:1, mean particle size became smaller. 2. The microcapsule prepared with 0.5-1.0 wt% surfactant had stable, uniform, smooth surface and spherical form. 3. The adoptable surfactant concentration was 0.5-1.0 wt% and optimal core-shell ratio was 1:1. 4. The endothemic peak appeared at near 260℃ to 270℃ from thermal analysis results due to releasing the core material. It was considered that the microcapsule had good thermal durability. 5. The finished leather treated with polyurethane binder and 0.2% urea-formaldehyde microcapsule had 99.9% antimicrobial activity.
Recently, domestic leather industry has some trouble because of international techniques competition and growth of the developing countries. Leather is a material created through the tanning of hides and skins of animals, primarily cattlehide. The tanning process converts the putrescible skin into a durable, long-lasting and versatile natural material for various uses. Products made of leather must have antimicrobial treatment. Otherwise these are generating rhinitis, bronchitis and atopic dermatities for old people and infant. Because it provied the perfect environment for the growth for house dust mites and harmful insects. It is expected that urea-formaldehyde microcapsules containing phytoncide oil shall have the antimicrobial activity on the leather product. Urea-formaldehyde microcapsules containing phytoncide oil were prepared by in-situ polymerization. Particle size distribution, surface morphology, thermal stability, and antimicrobial activity of the result and microcapsule were investigated. The results obtained in this study were summarized as follows: 1. As the increasing concentration of surfactant and weight ratio of core material to wall material is 1:1, mean particle size became smaller. 2. The microcapsule prepared with 0.5-1.0 wt% surfactant had stable, uniform, smooth surface and spherical form. 3. The adoptable surfactant concentration was 0.5-1.0 wt% and optimal core-shell ratio was 1:1. 4. The endothemic peak appeared at near 260℃ to 270℃ from thermal analysis results due to releasing the core material. It was considered that the microcapsule had good thermal durability. 5. The finished leather treated with polyurethane binder and 0.2% urea-formaldehyde microcapsule had 99.9% antimicrobial activity.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.