세리아로 안정화 시킨 세리아 안정화 지르코니아(Ce-TZP: Ceria Stabilized Tetragonal Zirconia Polycrystal)는 넓은 범위(8∼20 mol%)에서의 고용범위를 가지며, 현재 널리 사용되는 지르코니아 세라믹스인 이트리아 안정화 지르코니아(Y-TZP: Yttria Stabilized Tetragonal Zirconia Polycrystal)에 비해 저온열화 영역에서 높은 저항성을 가지며, 인성이 높은 장점을 가지고 있지만, 높은 온도에서 ...
세리아로 안정화 시킨 세리아 안정화 지르코니아(Ce-TZP: Ceria Stabilized Tetragonal Zirconia Polycrystal)는 넓은 범위(8∼20 mol%)에서의 고용범위를 가지며, 현재 널리 사용되는 지르코니아 세라믹스인 이트리아 안정화 지르코니아(Y-TZP: Yttria Stabilized Tetragonal Zirconia Polycrystal)에 비해 저온열화 영역에서 높은 저항성을 가지며, 인성이 높은 장점을 가지고 있지만, 높은 온도에서 소결이 이루어지며, 기계적 특성이 낮은 단점을 가지고 있다. 이러한 단점을 보완하기 위한 대표적인 산화물 첨가제로는 Fe2O3, Al2O3, MgO 등으로 알려져 있으며, 이러한 산화물 첨가제의 량은 Ce-TZP계 세라믹스의 기계적 특성을 증진 시키며, 소결을 촉진시키는 중요한 역할을 한다.
본 연구에서 행한 첫 번째 실험으로 선행 연구의 결과 가장 우수한 특성을 나타낸 16 mol%의 CeO2로 안정화된 16Ce-TZP에 기계적 특성과 소결성을 증진시키기 위해 CuO, MnO, Fe2O3, Y2O3, SiO2의 산화물을 첨가하여 특성을 관찰하였다.
Y2O3를 제외한 모든 산화물의 첨가에서는 16Ce-TZP에 비해 저온에서 기계적 특성을 발현하는 것을 확인하였으며, 특히 Fe2O3가 1 wt% 첨가되었을 때 1250℃에서 단사정상에서 정방정상으로의 상전이가 완료 되었으며, 1200℃에서는 미세기공이 존재하지 않는 치밀한 미세구조를 나타내었다. 그리고 1250℃에서 6.3 g/cm3의 겉보기 밀도와 1230 HV의 미세경도로 가장 우수한 특성을 나타내었다.
세리아로 안정화 시킨 세리아 안정화 지르코니아(Ce-TZP: Ceria Stabilized Tetragonal Zirconia Polycrystal)는 넓은 범위(8∼20 mol%)에서의 고용범위를 가지며, 현재 널리 사용되는 지르코니아 세라믹스인 이트리아 안정화 지르코니아(Y-TZP: Yttria Stabilized Tetragonal Zirconia Polycrystal)에 비해 저온열화 영역에서 높은 저항성을 가지며, 인성이 높은 장점을 가지고 있지만, 높은 온도에서 소결이 이루어지며, 기계적 특성이 낮은 단점을 가지고 있다. 이러한 단점을 보완하기 위한 대표적인 산화물 첨가제로는 Fe2O3, Al2O3, MgO 등으로 알려져 있으며, 이러한 산화물 첨가제의 량은 Ce-TZP계 세라믹스의 기계적 특성을 증진 시키며, 소결을 촉진시키는 중요한 역할을 한다.
본 연구에서 행한 첫 번째 실험으로 선행 연구의 결과 가장 우수한 특성을 나타낸 16 mol%의 CeO2로 안정화된 16Ce-TZP에 기계적 특성과 소결성을 증진시키기 위해 CuO, MnO, Fe2O3, Y2O3, SiO2의 산화물을 첨가하여 특성을 관찰하였다.
Y2O3를 제외한 모든 산화물의 첨가에서는 16Ce-TZP에 비해 저온에서 기계적 특성을 발현하는 것을 확인하였으며, 특히 Fe2O3가 1 wt% 첨가되었을 때 1250℃에서 단사정상에서 정방정상으로의 상전이가 완료 되었으며, 1200℃에서는 미세기공이 존재하지 않는 치밀한 미세구조를 나타내었다. 그리고 1250℃에서 6.3 g/cm3의 겉보기 밀도와 1230 HV의 미세경도로 가장 우수한 특성을 나타내었다.
Ce-TZP(Ceria Stabilized Zirconia) has excellent thermal and chemical resistant properties than Y-TZP which has excellent fracture toughness. but Ce-TZP sintering temperature is high, the mechanical properties is a low-end weak point.
In this experiment, 16Ce-TZP(16 mol% Ceria Stabilized Zircon...
Ce-TZP(Ceria Stabilized Zirconia) has excellent thermal and chemical resistant properties than Y-TZP which has excellent fracture toughness. but Ce-TZP sintering temperature is high, the mechanical properties is a low-end weak point.
In this experiment, 16Ce-TZP(16 mol% Ceria Stabilized Zirconia) was fabricated with different amonts of CuO, MnO, Fe2O3, Y2O3, and the mechanical properties and sintering behaviors were analysed. and Resistance under confirming boil about low temperature thermal degradation of Ce-TZP, Y-TZP(Yttria Stabilized Zirconia).
All the specimens with additives could have tetragonal only phase at relatively low temperature, which could be explained by formation of vacancy with additives. The specimen with 1.0 wt% Fe2O3 showed high apparent density(6.3 g/cm3), microhardness(1230 HV) sintered at 1250℃.
Addition of Fe2O3 into the Ce-TZP helped lowering the phase transformation temperature, and the fine grained microstructure, and high mechanical properties could be achieved.
Ce-TZP(Ceria Stabilized Zirconia) has excellent thermal and chemical resistant properties than Y-TZP which has excellent fracture toughness. but Ce-TZP sintering temperature is high, the mechanical properties is a low-end weak point.
In this experiment, 16Ce-TZP(16 mol% Ceria Stabilized Zirconia) was fabricated with different amonts of CuO, MnO, Fe2O3, Y2O3, and the mechanical properties and sintering behaviors were analysed. and Resistance under confirming boil about low temperature thermal degradation of Ce-TZP, Y-TZP(Yttria Stabilized Zirconia).
All the specimens with additives could have tetragonal only phase at relatively low temperature, which could be explained by formation of vacancy with additives. The specimen with 1.0 wt% Fe2O3 showed high apparent density(6.3 g/cm3), microhardness(1230 HV) sintered at 1250℃.
Addition of Fe2O3 into the Ce-TZP helped lowering the phase transformation temperature, and the fine grained microstructure, and high mechanical properties could be achieved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.