본 연구에서는 철 전기분해 장치를 이용하여 인의 제거효율에 미치는 영향인자들을 평가하기 위한 실험을 실시 하 였으며, 그 실험의 결과는 다음과 같다. 1. 전기분해에서 인의 제거율은 철 석출량에 비례하는데, 회분식의 실제하수 및 인공폐수를 대상으로 본 연구에서 개발한 철 석출량 산정식은 각각 y= 0.6668x+3.1253, y=0.6725x-0.8126이고, 여기서 y=철 석출량, x=전류의 세기를 나타낸다. 2. 부유물질(...
본 연구에서는 철 전기분해 장치를 이용하여 인의 제거효율에 미치는 영향인자들을 평가하기 위한 실험을 실시 하 였으며, 그 실험의 결과는 다음과 같다. 1. 전기분해에서 인의 제거율은 철 석출량에 비례하는데, 회분식의 실제하수 및 인공폐수를 대상으로 본 연구에서 개발한 철 석출량 산정식은 각각 y= 0.6668x+3.1253, y=0.6725x-0.8126이고, 여기서 y=철 석출량, x=전류의 세기를 나타낸다. 2. 부유물질(MLSS)의 농도가 높을수록 인의 제거율이 감소하였기 때문에 처리 대상수에 부유물질의 존재는 전기 분해의 효율을 저하시키는 주요 원인이 될 수 있다. 3. 체류시간과 인 제거율의 상관관계를 분석한 결과, 5A와 10A의 낮은 전류에서는 상관계수(R^(2))가 R^(2) = 0.90~0.99의 범위로 높았고, 20A, 30A의 높은 전류에서는 이보다 낮은 R^(2)=0.66~0.88의 범위을 나타냈다. 4. 전류가 증가함에 따라 철 석출량도 증가하지만 음극에서 발생하는 수산화이온 등도 늘어나, 인 제거율은 전류 가 높아질수록 함께 증가하지 않았다.
본 연구에서는 철 전기분해 장치를 이용하여 인의 제거효율에 미치는 영향인자들을 평가하기 위한 실험을 실시 하 였으며, 그 실험의 결과는 다음과 같다. 1. 전기분해에서 인의 제거율은 철 석출량에 비례하는데, 회분식의 실제하수 및 인공폐수를 대상으로 본 연구에서 개발한 철 석출량 산정식은 각각 y= 0.6668x+3.1253, y=0.6725x-0.8126이고, 여기서 y=철 석출량, x=전류의 세기를 나타낸다. 2. 부유물질(MLSS)의 농도가 높을수록 인의 제거율이 감소하였기 때문에 처리 대상수에 부유물질의 존재는 전기 분해의 효율을 저하시키는 주요 원인이 될 수 있다. 3. 체류시간과 인 제거율의 상관관계를 분석한 결과, 5A와 10A의 낮은 전류에서는 상관계수(R^(2))가 R^(2) = 0.90~0.99의 범위로 높았고, 20A, 30A의 높은 전류에서는 이보다 낮은 R^(2)=0.66~0.88의 범위을 나타냈다. 4. 전류가 증가함에 따라 철 석출량도 증가하지만 음극에서 발생하는 수산화이온 등도 늘어나, 인 제거율은 전류 가 높아질수록 함께 증가하지 않았다.
In this study, an experiment is performed for the evaluation of influential factors on the efficiency of phosphorus removal by using iron electrolysis device, and the results are as follows. 1. In the electrolysis, the rate of phosphorus removal is proportional to the deposition quantity of iron. An...
In this study, an experiment is performed for the evaluation of influential factors on the efficiency of phosphorus removal by using iron electrolysis device, and the results are as follows. 1. In the electrolysis, the rate of phosphorus removal is proportional to the deposition quantity of iron. And for practical and artificial wastewaters in batch reactors, the estimation equations developed in the study show y=0.6668x+3.1253 and y=0.6725x-0.8126, respectively, where y = deposition quantity of iron and x = current intensity. 2. As the concentration of the mixed liquor suspended solids(MLSS) becomes higher, the rate of phosphorus removal gets reduced and therefore the existence of MLSS in the wastewater to be treated could be a major cause that lowers the efficiency of electrolysis. 3. The results of the correlation(R^(2)) between the residence time and the phosphorus removal rate show R^(2)=0.90~0.99 at a lower current of 5A and 10A, while R^(2)=0.66~0.88 at a higher current of 20A and 30A. 4. Increase in current promotes the quantity of deposition of iron but at the same time the concentration of hydroxyl ion produced at the cathode also increases, and thus the phosphorus removal rate does not increase with higher current.
In this study, an experiment is performed for the evaluation of influential factors on the efficiency of phosphorus removal by using iron electrolysis device, and the results are as follows. 1. In the electrolysis, the rate of phosphorus removal is proportional to the deposition quantity of iron. And for practical and artificial wastewaters in batch reactors, the estimation equations developed in the study show y=0.6668x+3.1253 and y=0.6725x-0.8126, respectively, where y = deposition quantity of iron and x = current intensity. 2. As the concentration of the mixed liquor suspended solids(MLSS) becomes higher, the rate of phosphorus removal gets reduced and therefore the existence of MLSS in the wastewater to be treated could be a major cause that lowers the efficiency of electrolysis. 3. The results of the correlation(R^(2)) between the residence time and the phosphorus removal rate show R^(2)=0.90~0.99 at a lower current of 5A and 10A, while R^(2)=0.66~0.88 at a higher current of 20A and 30A. 4. Increase in current promotes the quantity of deposition of iron but at the same time the concentration of hydroxyl ion produced at the cathode also increases, and thus the phosphorus removal rate does not increase with higher current.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.