본 논문은 인화성 액체에 의해 발생한 방화 및 실화 등의 판정기법을 정립하기 위한 것으로 연소의 도달 시간, 연소의 패턴, 화염의 크기, 연소의 생성물, 잔류된 유류 증기(유증)의 존재 등을 분석하였다. 실험에 적용된 인화성 액체는 가솔린, 경유, 등유, 시너, 벤젠, 알코올, 아세톤, 대두유 등이다. 연소 실험은 한 면의 길이가 2,000mm인 정육면체의 구조물 내부에서 진행되었다. 연소 실험은 흘림 실험, 담유 실험, 뿌림 실험 등을 실시하였고, 착화원은 가스라이터 및 소형 ...
본 논문은 인화성 액체에 의해 발생한 방화 및 실화 등의 판정기법을 정립하기 위한 것으로 연소의 도달 시간, 연소의 패턴, 화염의 크기, 연소의 생성물, 잔류된 유류 증기(유증)의 존재 등을 분석하였다. 실험에 적용된 인화성 액체는 가솔린, 경유, 등유, 시너, 벤젠, 알코올, 아세톤, 대두유 등이다. 연소 실험은 한 면의 길이가 2,000mm인 정육면체의 구조물 내부에서 진행되었다. 연소 실험은 흘림 실험, 담유 실험, 뿌림 실험 등을 실시하였고, 착화원은 가스라이터 및 소형 토치를 사용하였다. 연소가 진행될 때 화염의 패턴 및 연소 시간 등의 해석은 디지털카메라(Digital Camera, Nikon Co., D-80, Japan) 및 비디오카메라(Digital Video Camera, Samsung Co., SV-U10, Korea) 등을 사용하였다. 또한 연소가 완료된 물질이 유류인지 아닌지의 판정은 유증검지관(Crime Investigation Tube, Type 290P Ⅱ, Kitagawa, Japan)을 사용하였다. 흘림 실험에서 단일 물질에 착화되어 1,000mm 떨어진 지점까지의 연소 도달시간은 경유가 0.2sec, 화염이 최성기에 도달되는 시간은 가솔린이 18.5sec, 연소의 완료 시간은 시너가 79.9sec로 가장 빠른 것으로 확인되었다. 화염이 최성기에 도달하였을 때 연기의 색상은 검은색이었고, 연소가 완료되었을 때는 흰색을 나타냈다. 그러나 대두유는 일정시간 화염을 인가하여도 연소는 진행되지 않았고 흰색 연기가 일부 발생하였다. 흘림 실험에서 혼합 물질에 착화되어 1,000mm 떨어진 지점까지의 연소 도달시간은 가솔린과 알코올의 혼합 물질이 0.7sec로 가장 빠른 것으로 확인되었다. 또한 화염이 최성기에 도달되는 시간은 가솔린과 아세톤의 혼합 물질이 25.2sec, 연소의 완료 시간은 가솔린과 시너의 혼합 물질이 121.5sec로 가장 빠른 것을 알 수 있었다. 그리고 화염이 최성기에 도달하였을 때 연기의 색상은 검은색이었고, 연소가 완료되면 흰색을 나타냈다. 그리고 단일 물질 실험에서 연소가 되지 않았던 대두유에 가솔린을 혼합하여 화염을 인가하면 연소가 일정 시간 진행되는 것을 알 수 있었다. 담유 실험에서 벤젠의 연소 시간은 60sec로 가장 빠르게 화염의 최성기에 도달하였고, 연소의 쇠퇴기도 가장 빠른 것으로 확인되었다. 연소에 의해 소손된 범위는 가솔린이 0.6m2로 가장 크게 형성되었다. 담유 실험이 진행될 때 연기의 색상은 흘림 실험과 같은 특성을 나타냈다. 또한 유증검지관의 반응 분석에서 잔류된 유류 증기의 반응색은 갈색으로 변화된 것이 확인됨에 따라 화재원인 판정에 활용할 수 있을 것으로 기대된다. 뿌림 실험에서 연소의 최성기에 도달되는 시간은 0.2sec로 벤젠이 가장 짧았으며, 소손된 범위도 약 0.56m2로 가장 넓은 것을 알 수 있었다. 화염이 최성기에 도달하였을 때 벤젠은 검은색 연기가 발생하였고, 아세톤과 알코올 등은 연기가 발생하지 않았다. 그리고 연소가 완료되어 화염이 없어질 때 대부분의 물질은 흰색의 연기를 발생시키는 것으로 확인되었다.
본 논문은 인화성 액체에 의해 발생한 방화 및 실화 등의 판정기법을 정립하기 위한 것으로 연소의 도달 시간, 연소의 패턴, 화염의 크기, 연소의 생성물, 잔류된 유류 증기(유증)의 존재 등을 분석하였다. 실험에 적용된 인화성 액체는 가솔린, 경유, 등유, 시너, 벤젠, 알코올, 아세톤, 대두유 등이다. 연소 실험은 한 면의 길이가 2,000mm인 정육면체의 구조물 내부에서 진행되었다. 연소 실험은 흘림 실험, 담유 실험, 뿌림 실험 등을 실시하였고, 착화원은 가스라이터 및 소형 토치를 사용하였다. 연소가 진행될 때 화염의 패턴 및 연소 시간 등의 해석은 디지털카메라(Digital Camera, Nikon Co., D-80, Japan) 및 비디오카메라(Digital Video Camera, Samsung Co., SV-U10, Korea) 등을 사용하였다. 또한 연소가 완료된 물질이 유류인지 아닌지의 판정은 유증검지관(Crime Investigation Tube, Type 290P Ⅱ, Kitagawa, Japan)을 사용하였다. 흘림 실험에서 단일 물질에 착화되어 1,000mm 떨어진 지점까지의 연소 도달시간은 경유가 0.2sec, 화염이 최성기에 도달되는 시간은 가솔린이 18.5sec, 연소의 완료 시간은 시너가 79.9sec로 가장 빠른 것으로 확인되었다. 화염이 최성기에 도달하였을 때 연기의 색상은 검은색이었고, 연소가 완료되었을 때는 흰색을 나타냈다. 그러나 대두유는 일정시간 화염을 인가하여도 연소는 진행되지 않았고 흰색 연기가 일부 발생하였다. 흘림 실험에서 혼합 물질에 착화되어 1,000mm 떨어진 지점까지의 연소 도달시간은 가솔린과 알코올의 혼합 물질이 0.7sec로 가장 빠른 것으로 확인되었다. 또한 화염이 최성기에 도달되는 시간은 가솔린과 아세톤의 혼합 물질이 25.2sec, 연소의 완료 시간은 가솔린과 시너의 혼합 물질이 121.5sec로 가장 빠른 것을 알 수 있었다. 그리고 화염이 최성기에 도달하였을 때 연기의 색상은 검은색이었고, 연소가 완료되면 흰색을 나타냈다. 그리고 단일 물질 실험에서 연소가 되지 않았던 대두유에 가솔린을 혼합하여 화염을 인가하면 연소가 일정 시간 진행되는 것을 알 수 있었다. 담유 실험에서 벤젠의 연소 시간은 60sec로 가장 빠르게 화염의 최성기에 도달하였고, 연소의 쇠퇴기도 가장 빠른 것으로 확인되었다. 연소에 의해 소손된 범위는 가솔린이 0.6m2로 가장 크게 형성되었다. 담유 실험이 진행될 때 연기의 색상은 흘림 실험과 같은 특성을 나타냈다. 또한 유증검지관의 반응 분석에서 잔류된 유류 증기의 반응색은 갈색으로 변화된 것이 확인됨에 따라 화재원인 판정에 활용할 수 있을 것으로 기대된다. 뿌림 실험에서 연소의 최성기에 도달되는 시간은 0.2sec로 벤젠이 가장 짧았으며, 소손된 범위도 약 0.56m2로 가장 넓은 것을 알 수 있었다. 화염이 최성기에 도달하였을 때 벤젠은 검은색 연기가 발생하였고, 아세톤과 알코올 등은 연기가 발생하지 않았다. 그리고 연소가 완료되어 화염이 없어질 때 대부분의 물질은 흰색의 연기를 발생시키는 것으로 확인되었다.
This study is performed to establish the judgment method for arson and accidental fire caused by flammable liquids. For that purpose, this study analyzed flame propagation speed, combustion pattern, flame size, product of combustion, existence of residual oil vapor, etc. Flammable liquids applied to...
This study is performed to establish the judgment method for arson and accidental fire caused by flammable liquids. For that purpose, this study analyzed flame propagation speed, combustion pattern, flame size, product of combustion, existence of residual oil vapor, etc. Flammable liquids applied to the combustion tests include gasoline, Diesel, kerosene, thinner, benzene, alcohol, acetone, bean oil, etc. Combustion tests were performed inside a cubic structure with the length of one side being 2,000mm. For the combustion test, this study performed an oil flow test, contained oil test and oil sprinkling test by using a gas lighter and small torch as an ignition source. Analysis of flame pattern and combustion time was performed using a digital camera (D-80, Nikon Co., Japan) and digital video camera (SV-U10, Samsung Co., Korea). In addition, an oil vapor detection tube (Crime Investigation Tube, Type 290P Ⅱ, Kitagawa, Japan) was used to judge whether or not the combustion completed substance is oil. In the oil flow test, Diesel showed a flame propagation speed of 0.2sec up to the point 1,000mm away from its ignition. In the case of the thinner, it took 79.9sec to complete the combustion, which was the shortest time. When the flame reached its peak, the smoke was black and when combustion was completed, it was white. However, in the case of the bean oil, even though a flame was applied for a certain period of time, combustion did not occur, although some white smoke occurred. In the case of the flow test, the mixture of gasoline and alcohol showed the fastest flame propagation speed, 0.7sec, up to the point 1,000mm away from its ignition. In addition, in the case of the mixture of gasoline and acetone, it took 25.2sec for its flame to reach its peak while in the case of the mixture of the gasoline and thinner, it took 121.5sec to complete the combustion, which was the shortest time, and when the flame reached its peak, its smoke was black and when combustion was completed, it was white. When flame was applied to the bean oil which had not been combusted during the combustion test for a single substance, combustion occurred for a certain period of time. In the contained oil test, it was found that the combustion of the benzene reached its peak in 60sec, which was the shortest time, and that its combustion declined in the fastest period of time. In the case of the range of damage due to combustion, gasoline showed the widest range of 0.6m2. When performing the contained oil test, the smoke showed the same characteristics as that of the oil flow test. In addition, it was found from the reaction analysis by the oil vapor detection tube that the reaction color of the residual oil vapor was brown. Therefore, it is expected to be utilized for the judgment of the cause of fire In the oil sprinkling test, the combustion of the benzene reached its peak in 0.2sec, which was the shortest time, and that the damage range was approximately 0.56m2, which was the widest. When the flame reached its peak, the benzene generated black smoke and the acetone and alcohol showed no smoke. It was found that most of the above substances generated white smoke when the flame disappeared after completion of combustion.
This study is performed to establish the judgment method for arson and accidental fire caused by flammable liquids. For that purpose, this study analyzed flame propagation speed, combustion pattern, flame size, product of combustion, existence of residual oil vapor, etc. Flammable liquids applied to the combustion tests include gasoline, Diesel, kerosene, thinner, benzene, alcohol, acetone, bean oil, etc. Combustion tests were performed inside a cubic structure with the length of one side being 2,000mm. For the combustion test, this study performed an oil flow test, contained oil test and oil sprinkling test by using a gas lighter and small torch as an ignition source. Analysis of flame pattern and combustion time was performed using a digital camera (D-80, Nikon Co., Japan) and digital video camera (SV-U10, Samsung Co., Korea). In addition, an oil vapor detection tube (Crime Investigation Tube, Type 290P Ⅱ, Kitagawa, Japan) was used to judge whether or not the combustion completed substance is oil. In the oil flow test, Diesel showed a flame propagation speed of 0.2sec up to the point 1,000mm away from its ignition. In the case of the thinner, it took 79.9sec to complete the combustion, which was the shortest time. When the flame reached its peak, the smoke was black and when combustion was completed, it was white. However, in the case of the bean oil, even though a flame was applied for a certain period of time, combustion did not occur, although some white smoke occurred. In the case of the flow test, the mixture of gasoline and alcohol showed the fastest flame propagation speed, 0.7sec, up to the point 1,000mm away from its ignition. In addition, in the case of the mixture of gasoline and acetone, it took 25.2sec for its flame to reach its peak while in the case of the mixture of the gasoline and thinner, it took 121.5sec to complete the combustion, which was the shortest time, and when the flame reached its peak, its smoke was black and when combustion was completed, it was white. When flame was applied to the bean oil which had not been combusted during the combustion test for a single substance, combustion occurred for a certain period of time. In the contained oil test, it was found that the combustion of the benzene reached its peak in 60sec, which was the shortest time, and that its combustion declined in the fastest period of time. In the case of the range of damage due to combustion, gasoline showed the widest range of 0.6m2. When performing the contained oil test, the smoke showed the same characteristics as that of the oil flow test. In addition, it was found from the reaction analysis by the oil vapor detection tube that the reaction color of the residual oil vapor was brown. Therefore, it is expected to be utilized for the judgment of the cause of fire In the oil sprinkling test, the combustion of the benzene reached its peak in 0.2sec, which was the shortest time, and that the damage range was approximately 0.56m2, which was the widest. When the flame reached its peak, the benzene generated black smoke and the acetone and alcohol showed no smoke. It was found that most of the above substances generated white smoke when the flame disappeared after completion of combustion.
주제어
#핵심어
#화염 전파 속도 인화성 액체 판정 기법 유증 검지관 흘림 실험 담유 실험 뿌림 실험
학위논문 정보
저자
조희수
학위수여기관
전주대학교 대학원
학위구분
국내석사
학과
소방안전공학과
지도교수
최충석
발행연도
2013
총페이지
xii, 67 p.
키워드
핵심어,
화염 전파 속도 인화성 액체 판정 기법 유증 검지관 흘림 실험 담유 실험 뿌림 실험
※ AI-Helper는 부적절한 답변을 할 수 있습니다.