<국문초록> pH -0.5의 고농도 철을 함유한 염산침출용액으로부터 코발트와 니켈의 분리 및 회수를 위한 공정개발이 시행되었다. 코발트와 니켈은 망간, 마그네슘, 칼슘, 알루미늄 그리고 고농도 제1철과 함께 용액에 존재하였다. 본 연구에서는 고순도 코발트와 니켈용액을 제조하기 위한 습식야금법이 시행되었다. 제안된 공정은 다음과 같은 단위공정들로 구성되었다. (1) pH -0.5의 실제침출용액으로부터 1M Aliquat (4급아민계 추출제의 종류)를 이용한 니켈로부터 코발트, 망간 그리고 철(II)의 추출 및 희석된 염산을 이용한 금속이 추출된 추출제로부터의 탈거 (2) 용액의 ...
<국문초록> pH -0.5의 고농도 철을 함유한 염산침출용액으로부터 코발트와 니켈의 분리 및 회수를 위한 공정개발이 시행되었다. 코발트와 니켈은 망간, 마그네슘, 칼슘, 알루미늄 그리고 고농도 제1철과 함께 용액에 존재하였다. 본 연구에서는 고순도 코발트와 니켈용액을 제조하기 위한 습식야금법이 시행되었다. 제안된 공정은 다음과 같은 단위공정들로 구성되었다. (1) pH -0.5의 실제침출용액으로부터 1M Aliquat (4급아민계 추출제의 종류)를 이용한 니켈로부터 코발트, 망간 그리고 철(II)의 추출 및 희석된 염산을 이용한 금속이 추출된 추출제로부터의 탈거 (2) 용액의 산화 뒤, pH 1에서 1M D2EHPA( Di(2-ethylhexyl phosphoric) 와 TBP( Tri-n-butyl phosphate) 의 혼합추출제를 이용한 용매추출에 의한 철의 제거. H2SO3와 H2SO4 의 혼합물을 사용하여 금속이 추출된 추출제가 탈거되었다. (3) NaOH를 사용하여 pH를 증가시켜 화학적 침전법에 의한 알루미늄의 제거 (4) pH 6.5의 용액에서 Versatic10을 이용한 니켈의 추출 및 0.1M 황산을 이용한 탈거에 의한 정제 순수한 코발트를 얻기 위한 금속이 추출된 추출제의 탈거공정과 추출공정이 시행되었다. D2EHPA와 TBP의 혼합추출제에 의해 코발트와 망간으로부터 철(III)은 추출되었다. 또한 Cyanex301을 이용하여 망간으로부터 코발트를 분리하였다.
<국문초록> pH -0.5의 고농도 철을 함유한 염산침출용액으로부터 코발트와 니켈의 분리 및 회수를 위한 공정개발이 시행되었다. 코발트와 니켈은 망간, 마그네슘, 칼슘, 알루미늄 그리고 고농도 제1철과 함께 용액에 존재하였다. 본 연구에서는 고순도 코발트와 니켈용액을 제조하기 위한 습식야금법이 시행되었다. 제안된 공정은 다음과 같은 단위공정들로 구성되었다. (1) pH -0.5의 실제침출용액으로부터 1M Aliquat (4급아민계 추출제의 종류)를 이용한 니켈로부터 코발트, 망간 그리고 철(II)의 추출 및 희석된 염산을 이용한 금속이 추출된 추출제로부터의 탈거 (2) 용액의 산화 뒤, pH 1에서 1M D2EHPA( Di(2-ethylhexyl phosphoric) 와 TBP( Tri-n-butyl phosphate) 의 혼합추출제를 이용한 용매추출에 의한 철의 제거. H2SO3와 H2SO4 의 혼합물을 사용하여 금속이 추출된 추출제가 탈거되었다. (3) NaOH를 사용하여 pH를 증가시켜 화학적 침전법에 의한 알루미늄의 제거 (4) pH 6.5의 용액에서 Versatic10을 이용한 니켈의 추출 및 0.1M 황산을 이용한 탈거에 의한 정제 순수한 코발트를 얻기 위한 금속이 추출된 추출제의 탈거공정과 추출공정이 시행되었다. D2EHPA와 TBP의 혼합추출제에 의해 코발트와 망간으로부터 철(III)은 추출되었다. 또한 Cyanex301을 이용하여 망간으로부터 코발트를 분리하였다.
of a process for the separation and recovery of cobalt and nickel from chloride leach solution with high iron concentration at pH -0.5 was investigated. Cobalt and nickel were coexisted with impurities such as manganese, magnesium, calcium, aluminium and high concentration ferrous iron (81.2g/L). T...
of a process for the separation and recovery of cobalt and nickel from chloride leach solution with high iron concentration at pH -0.5 was investigated. Cobalt and nickel were coexisted with impurities such as manganese, magnesium, calcium, aluminium and high concentration ferrous iron (81.2g/L). This present work operated a hydrometallurgical method which was capable of producing a nickel solution with high purity (98.7%), and high purity cobalt liquor. The proposed process consists of the following unit operations: (1) Cobalt, manganese and iron(II) extraction over nickel by 1M Aliquat336 (a kind of quaternary amine extractants) from real leach solution without pH adjustment at pH= -0.5, with stripping of the loaded organic phase by using diluted HCl ( pH=3). (2) Removal of iron(III) by solvent extraction using 1M D2EHPA ( Di(2-ethylhexyl phosphoric) mixed with TBP ( Tri-n-butyl phosphate) at pH 1 after oxidation of the solution. The loaded organic phase was stripped by H2SO3 mixed with H2SO4. (3) Removal of aluminum by chemical precipitation by increasing pH with NaOH. (4) Nickel extraction by using Versatic 10 at pH 6.5 and purification by stripping with 0.1M H2SO4. (5) The loaded organic phase was processed by stripping and other extraction steps to get pure cobalt. Iron(III) was extracted over cobalt and manganese by D2EHPA mixed with TBP. Cobalt was separated from manganese by using Cyanex301.
of a process for the separation and recovery of cobalt and nickel from chloride leach solution with high iron concentration at pH -0.5 was investigated. Cobalt and nickel were coexisted with impurities such as manganese, magnesium, calcium, aluminium and high concentration ferrous iron (81.2g/L). This present work operated a hydrometallurgical method which was capable of producing a nickel solution with high purity (98.7%), and high purity cobalt liquor. The proposed process consists of the following unit operations: (1) Cobalt, manganese and iron(II) extraction over nickel by 1M Aliquat336 (a kind of quaternary amine extractants) from real leach solution without pH adjustment at pH= -0.5, with stripping of the loaded organic phase by using diluted HCl ( pH=3). (2) Removal of iron(III) by solvent extraction using 1M D2EHPA ( Di(2-ethylhexyl phosphoric) mixed with TBP ( Tri-n-butyl phosphate) at pH 1 after oxidation of the solution. The loaded organic phase was stripped by H2SO3 mixed with H2SO4. (3) Removal of aluminum by chemical precipitation by increasing pH with NaOH. (4) Nickel extraction by using Versatic 10 at pH 6.5 and purification by stripping with 0.1M H2SO4. (5) The loaded organic phase was processed by stripping and other extraction steps to get pure cobalt. Iron(III) was extracted over cobalt and manganese by D2EHPA mixed with TBP. Cobalt was separated from manganese by using Cyanex301.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.