본 논문은 국방연구개발 과정에서 수행되는 유도무기 시험평가를 기존의 명중률 중심의 평가에서 벗어나 신뢰성 성장관리를 통해 목표 신뢰도 달성 여부를 추적하여 수행 가능함을 제시하고, 그 적용을 제안하는 내용이다. One-Shot 체계인 유도무기가 전력화되어 배치된 후 군의 초기 운용과정에서 일부 불명중되면서 시험평가 방법의 적절성에 논란이 제기되어왔다. 지금까지 연구개발 유도무기 시험평가는 사용자인 군에서 제시된 ROC 명중률이 모든 개발과 시험평가의 기준이 되어 사격시험을 통해 산술적으로 계산된 명중비율이 기준을 충족하면 합격이라는 단순한 결과 중심적인 평가방법으로 수행되어 왔다. 그러나 이러한 평가방법은 통계적인 관점에서 보면 개발기간과 비용의 제약으로 인해 적은 수량의 시험평가를 할 수밖에 없어 그 평가결과의 오류를 부인할 수 없는 한계가 있다. 더욱이 연구개발 단계에서의 유도무기 시험평가는 기 제작된 일정 규모의 양산품 중 일부를 샘플링하여 시험하는 것이 아니라, 개발자와 제작자가 개발 프로세스를 거치면서 단계적으로 개선을 통해 신뢰성이 성장된 시제품을 이용하여 사격시험을 한다. 따라서 동일한 형상의 시제품 유도무기를 평가대상으로 하지 않고 있다는 점에서 대표성에 문제가 있다. 이에 따라 본 연구에서는 개발단계에서 유도무기의 시험평가는 분석과 ...
본 논문은 국방연구개발 과정에서 수행되는 유도무기 시험평가를 기존의 명중률 중심의 평가에서 벗어나 신뢰성 성장관리를 통해 목표 신뢰도 달성 여부를 추적하여 수행 가능함을 제시하고, 그 적용을 제안하는 내용이다. One-Shot 체계인 유도무기가 전력화되어 배치된 후 군의 초기 운용과정에서 일부 불명중되면서 시험평가 방법의 적절성에 논란이 제기되어왔다. 지금까지 연구개발 유도무기 시험평가는 사용자인 군에서 제시된 ROC 명중률이 모든 개발과 시험평가의 기준이 되어 사격시험을 통해 산술적으로 계산된 명중비율이 기준을 충족하면 합격이라는 단순한 결과 중심적인 평가방법으로 수행되어 왔다. 그러나 이러한 평가방법은 통계적인 관점에서 보면 개발기간과 비용의 제약으로 인해 적은 수량의 시험평가를 할 수밖에 없어 그 평가결과의 오류를 부인할 수 없는 한계가 있다. 더욱이 연구개발 단계에서의 유도무기 시험평가는 기 제작된 일정 규모의 양산품 중 일부를 샘플링하여 시험하는 것이 아니라, 개발자와 제작자가 개발 프로세스를 거치면서 단계적으로 개선을 통해 신뢰성이 성장된 시제품을 이용하여 사격시험을 한다. 따라서 동일한 형상의 시제품 유도무기를 평가대상으로 하지 않고 있다는 점에서 대표성에 문제가 있다. 이에 따라 본 연구에서는 개발단계에서 유도무기의 시험평가는 분석과 시정조치를 통해 다음 시제품에서 성능과 품질의 개선이 이루어지는 특성을 고려하여 신뢰성 성장분석을 통한 과정 중심의 시험평가 수행이 필요함을 제시하였다. 이를 위해 연구개발된 유도무기 3종의 개발 및 운용단계에서 실제 사격결과 자료를 분석하여 분석모형을 설정하고, 분석도구로 미 육군과 국방과학연구서 등에서 사용하고 있는 GA(Reliability Growth & Repairable System Data Analysis) 소프트웨어를 이용하여 Standard Gompertz모델과 Crow-AMSAA모델을 적용하였다. 그 결과 해당 유도무기의 신뢰도는 개발단계에서 점진적으로 증가 하였으며, 실제 유도탄의 명중률과 매우 근사한 값으로 분석되어 신뢰성 성장관리를 통한 유도무기의 시험평가 수행이 가능함을 확인하였다. 그리고 이러한 연구결과를 유도무기 시험평가에 적용하기 위해 신뢰성 성장관리계획 수립과 시나리오별 신뢰도 분석을 실시하여 신뢰도 성장관리 도표의 활용을 제안하였다. 이러한 제안은 시험계획의 변경이나 시험수량의 조정, 자원의 추가 투입이나 재분배를 통한 시험평가에도 유용하다. 이와 같은 본 연구결과는 유도무기 연구개발단계에서 합리적인 시험평가 수행을 위한 시험평가 방법으로 활용될 수 있을 것이다.
본 논문은 국방연구개발 과정에서 수행되는 유도무기 시험평가를 기존의 명중률 중심의 평가에서 벗어나 신뢰성 성장관리를 통해 목표 신뢰도 달성 여부를 추적하여 수행 가능함을 제시하고, 그 적용을 제안하는 내용이다. One-Shot 체계인 유도무기가 전력화되어 배치된 후 군의 초기 운용과정에서 일부 불명중되면서 시험평가 방법의 적절성에 논란이 제기되어왔다. 지금까지 연구개발 유도무기 시험평가는 사용자인 군에서 제시된 ROC 명중률이 모든 개발과 시험평가의 기준이 되어 사격시험을 통해 산술적으로 계산된 명중비율이 기준을 충족하면 합격이라는 단순한 결과 중심적인 평가방법으로 수행되어 왔다. 그러나 이러한 평가방법은 통계적인 관점에서 보면 개발기간과 비용의 제약으로 인해 적은 수량의 시험평가를 할 수밖에 없어 그 평가결과의 오류를 부인할 수 없는 한계가 있다. 더욱이 연구개발 단계에서의 유도무기 시험평가는 기 제작된 일정 규모의 양산품 중 일부를 샘플링하여 시험하는 것이 아니라, 개발자와 제작자가 개발 프로세스를 거치면서 단계적으로 개선을 통해 신뢰성이 성장된 시제품을 이용하여 사격시험을 한다. 따라서 동일한 형상의 시제품 유도무기를 평가대상으로 하지 않고 있다는 점에서 대표성에 문제가 있다. 이에 따라 본 연구에서는 개발단계에서 유도무기의 시험평가는 분석과 시정조치를 통해 다음 시제품에서 성능과 품질의 개선이 이루어지는 특성을 고려하여 신뢰성 성장분석을 통한 과정 중심의 시험평가 수행이 필요함을 제시하였다. 이를 위해 연구개발된 유도무기 3종의 개발 및 운용단계에서 실제 사격결과 자료를 분석하여 분석모형을 설정하고, 분석도구로 미 육군과 국방과학연구서 등에서 사용하고 있는 GA(Reliability Growth & Repairable System Data Analysis) 소프트웨어를 이용하여 Standard Gompertz모델과 Crow-AMSAA모델을 적용하였다. 그 결과 해당 유도무기의 신뢰도는 개발단계에서 점진적으로 증가 하였으며, 실제 유도탄의 명중률과 매우 근사한 값으로 분석되어 신뢰성 성장관리를 통한 유도무기의 시험평가 수행이 가능함을 확인하였다. 그리고 이러한 연구결과를 유도무기 시험평가에 적용하기 위해 신뢰성 성장관리계획 수립과 시나리오별 신뢰도 분석을 실시하여 신뢰도 성장관리 도표의 활용을 제안하였다. 이러한 제안은 시험계획의 변경이나 시험수량의 조정, 자원의 추가 투입이나 재분배를 통한 시험평가에도 유용하다. 이와 같은 본 연구결과는 유도무기 연구개발단계에서 합리적인 시험평가 수행을 위한 시험평가 방법으로 활용될 수 있을 것이다.
This study proposes a new Test & Evaluation(T&E) method and presents its applicability instead of traditional hit probability-oriented test method on Guided Missiles during the Defense Research & Development phase, which traces the accomplishment of target reliability by Reliability Growth Managemen...
This study proposes a new Test & Evaluation(T&E) method and presents its applicability instead of traditional hit probability-oriented test method on Guided Missiles during the Defense Research & Development phase, which traces the accomplishment of target reliability by Reliability Growth Management strategy. The proprietary of the T&E process of Guided Missiles domestic manufactured by research & development has been questioned, especially when a guided missile under the One-Shot system missed the intended target during the initial operation phase. Until now, the T&E of guided missile is performed in order to confirm whether the required Hit Probability on ROC set by military service is achieved. This is a case of ‘the result oriented method’ which based on the arithmeticalcalculation of the number of successful firings over the number of trials. However, in the stochastical point of view, this T&E method is not free from the error inherited by small sample size due to the limited development schedule and cost. In addition, the general configuration and performance of missile is upgraded and enhanced during the development process. Accordingly, the traditional T&E method may include representative error because the missiles on T&E are not identical specification. Therefore, this research emphasizes the necessity of process centric T&E by Reliability Growth Management strategy. Live firing data on three types of missiles that are domestically researched and developed are collected and analyzed during the development and operational phase, and thereby analysis model is built. In order to analyze Reliability Growth Management strategy, as an analysis tool, RGA(Reliability Growth & Repairable System Data Analysis) software is utilized, which is used in US Army and Agency for Defense Development in korea. And Standard Gompertz Model and Crow-AMSAA(Army Materiel System Analysis Activity) Model are applied for analysis. The results show that reliability of guided missile on the test is increased and closes to the hit probability data from live firing. This means that the T&E of Guided Missiles can be done by Reliability Growth Management. For the application of this T&E method of guided missiles, a scheme of Reliability Growth management plan is laid out and usage of Growth Management table is proposed by providing the results of reliability analysis on each scenario. This table can be utilized when the plan of experiment is modified, the number of sample is changed, or resources are increased or redistributed. Finally, the result of this study can be utilized as a test method to carry out reasonable T&E in the development phase of guided missiles.
This study proposes a new Test & Evaluation(T&E) method and presents its applicability instead of traditional hit probability-oriented test method on Guided Missiles during the Defense Research & Development phase, which traces the accomplishment of target reliability by Reliability Growth Management strategy. The proprietary of the T&E process of Guided Missiles domestic manufactured by research & development has been questioned, especially when a guided missile under the One-Shot system missed the intended target during the initial operation phase. Until now, the T&E of guided missile is performed in order to confirm whether the required Hit Probability on ROC set by military service is achieved. This is a case of ‘the result oriented method’ which based on the arithmeticalcalculation of the number of successful firings over the number of trials. However, in the stochastical point of view, this T&E method is not free from the error inherited by small sample size due to the limited development schedule and cost. In addition, the general configuration and performance of missile is upgraded and enhanced during the development process. Accordingly, the traditional T&E method may include representative error because the missiles on T&E are not identical specification. Therefore, this research emphasizes the necessity of process centric T&E by Reliability Growth Management strategy. Live firing data on three types of missiles that are domestically researched and developed are collected and analyzed during the development and operational phase, and thereby analysis model is built. In order to analyze Reliability Growth Management strategy, as an analysis tool, RGA(Reliability Growth & Repairable System Data Analysis) software is utilized, which is used in US Army and Agency for Defense Development in korea. And Standard Gompertz Model and Crow-AMSAA(Army Materiel System Analysis Activity) Model are applied for analysis. The results show that reliability of guided missile on the test is increased and closes to the hit probability data from live firing. This means that the T&E of Guided Missiles can be done by Reliability Growth Management. For the application of this T&E method of guided missiles, a scheme of Reliability Growth management plan is laid out and usage of Growth Management table is proposed by providing the results of reliability analysis on each scenario. This table can be utilized when the plan of experiment is modified, the number of sample is changed, or resources are increased or redistributed. Finally, the result of this study can be utilized as a test method to carry out reasonable T&E in the development phase of guided missiles.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.