이 연구는 양자점이 균일하게 매몰 된 구형 Al2O3 분말을 소개한다. 용액 상태의 양자점은 색 변환 된 백색 light-emitting diode (LED)나 디스플레이와 같은 고체 시스템에 적용하기에 적합한 형태가 아니다. 많은 연구에서 알콕사이드의 가수 분해 반응을 통해 용액 상태의 양자점을 고체 분말로 전환시켰지만, 이 방법은 분말의 형태를 쉽게 조절할 수 없다는 단점이 있다. 따라서 이번 연구에서는 물이나 산염기 촉매가 필요하지 않는 aluminum tri-sec-butoxide (Al(O-sec-Bu)3의 빠른 가수 분해 반응과 전기 ...
이 연구는 양자점이 균일하게 매몰 된 구형 Al2O3 분말을 소개한다. 용액 상태의 양자점은 색 변환 된 백색 light-emitting diode (LED)나 디스플레이와 같은 고체 시스템에 적용하기에 적합한 형태가 아니다. 많은 연구에서 알콕사이드의 가수 분해 반응을 통해 용액 상태의 양자점을 고체 분말로 전환시켰지만, 이 방법은 분말의 형태를 쉽게 조절할 수 없다는 단점이 있다. 따라서 이번 연구에서는 물이나 산염기 촉매가 필요하지 않는 aluminum tri-sec-butoxide (Al(O-sec-Bu)3의 빠른 가수 분해 반응과 전기 분무법을 결합하여, 모양이 조절된 양자점이 함침 된 분말을 합성하는 방법을 제시한다. 첫째, 우리는 녹색 CuGaS2/ZnS (CGZS)와 적색 CuInS2/ZnS (CIZS) 코어/쉘 구조의 양자점을 합성하였고, 그 표면을 zirconium propoxide (Zr(PrO)4)로 처리하여 전기 분부 과정에서의 표면 손상을 방지하였다. 합성된 Zr(PrO)4가 처리 된 CGZS와 CIZS 양자점을 유기 용매에 분산된 Al(O-sec-Bu)3와 혼합 하였다. 혼합 된 용액을 유리 기판 위에 전기 분무하였고, 양자점이 함침 된 구형 Al2O3 분말을 얻을 수 있었다. 우리는 Al(O-sec-Bu)3가 분산된 용매, 노즐의 내경 그리고 전기장의 세기를 변수로 전기 분무 최적화 실험을 진행했다. 최적 조건으로 합성된 CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3는 평균 직경이 약 ~6 ㎛ 로, 각각 502 nm과 602 nm의 발광 파장을 보였고, 45 %와 42 %의 양자 효율을 보였다. CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3 분말은 온칩 형 청색 LED에서 색 변환 물질로 적용하기 위해 모두 광 경화성 고분자에 혼합하였다. CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3 분말이 혼합된 백색 LED는 6857 K의 색 온도에서 77 lm/W의 발광 효율 값과 93의 연색지수를 나타 냈다.
이 연구는 양자점이 균일하게 매몰 된 구형 Al2O3 분말을 소개한다. 용액 상태의 양자점은 색 변환 된 백색 light-emitting diode (LED)나 디스플레이와 같은 고체 시스템에 적용하기에 적합한 형태가 아니다. 많은 연구에서 알콕사이드의 가수 분해 반응을 통해 용액 상태의 양자점을 고체 분말로 전환시켰지만, 이 방법은 분말의 형태를 쉽게 조절할 수 없다는 단점이 있다. 따라서 이번 연구에서는 물이나 산염기 촉매가 필요하지 않는 aluminum tri-sec-butoxide (Al(O-sec-Bu)3의 빠른 가수 분해 반응과 전기 분무법을 결합하여, 모양이 조절된 양자점이 함침 된 분말을 합성하는 방법을 제시한다. 첫째, 우리는 녹색 CuGaS2/ZnS (CGZS)와 적색 CuInS2/ZnS (CIZS) 코어/쉘 구조의 양자점을 합성하였고, 그 표면을 zirconium propoxide (Zr(PrO)4)로 처리하여 전기 분부 과정에서의 표면 손상을 방지하였다. 합성된 Zr(PrO)4가 처리 된 CGZS와 CIZS 양자점을 유기 용매에 분산된 Al(O-sec-Bu)3와 혼합 하였다. 혼합 된 용액을 유리 기판 위에 전기 분무하였고, 양자점이 함침 된 구형 Al2O3 분말을 얻을 수 있었다. 우리는 Al(O-sec-Bu)3가 분산된 용매, 노즐의 내경 그리고 전기장의 세기를 변수로 전기 분무 최적화 실험을 진행했다. 최적 조건으로 합성된 CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3는 평균 직경이 약 ~6 ㎛ 로, 각각 502 nm과 602 nm의 발광 파장을 보였고, 45 %와 42 %의 양자 효율을 보였다. CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3 분말은 온칩 형 청색 LED에서 색 변환 물질로 적용하기 위해 모두 광 경화성 고분자에 혼합하였다. CGZS/Zr(PrO)4/Al2O3와 CIZS/Zr(PrO)4/Al2O3 분말이 혼합된 백색 LED는 6857 K의 색 온도에서 77 lm/W의 발광 효율 값과 93의 연색지수를 나타 냈다.
This study introduces quantum dot (QD) uniformly embedded Al2O3 powders with spherical micro-powders. The QD solution phase is not an appropriate form to be applied to solid-state systems, such as color-converted white light-emitting diodes (LEDs) or displays. Many studies have converted QDs into a ...
This study introduces quantum dot (QD) uniformly embedded Al2O3 powders with spherical micro-powders. The QD solution phase is not an appropriate form to be applied to solid-state systems, such as color-converted white light-emitting diodes (LEDs) or displays. Many studies have converted QDs into a solid powder through the hydrolysis of an alkoxide, but this method does not offer easy control of the shapes of the powders. Therefore, we introduce a synthetic method by which to create shape-controlled QD embedded powders through a combination of electro-spray (e-spray) and the fast hydrolysis reaction of aluminum tri-sec-butoxide (Al(O-sec-Bu)3) without an addition of water or acid or base catalysts. First, we synthesized green CuGaS2/ZnS (CGZS) and red CuInS2/ZnS (CIZS) core/shell QDs, after which their surfaces were in-situ-treated with zirconium propoxide (Zr(PrO)4) to protect against surface damages during the e-spray process. As-prepared Zr(PrO)4-treated CGZS and CIZS QDs were mixed with Al(O-sec-Bu)3 in organic solvents. The mixed solution was e-sprayed onto a glass substrate and QD embedded Al2O3 pwoders were obtained. We performed e-spray optimization experiments with Al(O-sec-Bu)3 dispersed solvent, nozzle inner diameter and electric field strength as parameters. The synthesized under optimized conditions CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 show dominant wavelengths of 502 and 602 nm and photoluminescent quantum yields of 45 and 42%, respectively, with average diameters of ~6 ㎛. Both the CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 powders were mixed with a UV-curable binder for application as color converters in on-chip types of blue LEDs. White LEDs with mixed CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 powders both showed comparable luminous efficacy values of 77 lm/W and color rendering index of 93 at a correlated-color temperature of 6857K, respectively.
This study introduces quantum dot (QD) uniformly embedded Al2O3 powders with spherical micro-powders. The QD solution phase is not an appropriate form to be applied to solid-state systems, such as color-converted white light-emitting diodes (LEDs) or displays. Many studies have converted QDs into a solid powder through the hydrolysis of an alkoxide, but this method does not offer easy control of the shapes of the powders. Therefore, we introduce a synthetic method by which to create shape-controlled QD embedded powders through a combination of electro-spray (e-spray) and the fast hydrolysis reaction of aluminum tri-sec-butoxide (Al(O-sec-Bu)3) without an addition of water or acid or base catalysts. First, we synthesized green CuGaS2/ZnS (CGZS) and red CuInS2/ZnS (CIZS) core/shell QDs, after which their surfaces were in-situ-treated with zirconium propoxide (Zr(PrO)4) to protect against surface damages during the e-spray process. As-prepared Zr(PrO)4-treated CGZS and CIZS QDs were mixed with Al(O-sec-Bu)3 in organic solvents. The mixed solution was e-sprayed onto a glass substrate and QD embedded Al2O3 pwoders were obtained. We performed e-spray optimization experiments with Al(O-sec-Bu)3 dispersed solvent, nozzle inner diameter and electric field strength as parameters. The synthesized under optimized conditions CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 show dominant wavelengths of 502 and 602 nm and photoluminescent quantum yields of 45 and 42%, respectively, with average diameters of ~6 ㎛. Both the CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 powders were mixed with a UV-curable binder for application as color converters in on-chip types of blue LEDs. White LEDs with mixed CGZS/Zr(PrO)4/Al2O3 and CIZS/Zr(PrO)4/Al2O3 powders both showed comparable luminous efficacy values of 77 lm/W and color rendering index of 93 at a correlated-color temperature of 6857K, respectively.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.