오염물질이 수계에 유입됨에 따라 효율적인 수질 관리에 많은 문제점을 유발하고 특히 하수 중 질소와 같은 영양염류는 부영양화를 유발시키는 주 원인물질로서 관리의 중요성이 날로 증대되고 있다. 또한 2012년 영양염류와 유기물 처리기준이 대폭 강화되었고 T-N의 경우 선진국에 미치지 못하는 수준으로 방류수 수질 기준은 향후 10 mg/L이하로 강화될 것으로 보고 있다. 본 연구에서는 강화된 공공하수처리시설 방류수 수질기준을 만족시키기 위하여 미생물 고정화 담체를 MLE공법에 적용하여 처리효율을 확인하였다. 방류수 수질 예측 프로그램인 EQPS(Effluent Quality Predication System)를 사용하여 미생물 고정화담체를 가장 적합하게 모사할 수 있는 반응조 lay-out을 구성하였다. 반응조 ...
오염물질이 수계에 유입됨에 따라 효율적인 수질 관리에 많은 문제점을 유발하고 특히 하수 중 질소와 같은 영양염류는 부영양화를 유발시키는 주 원인물질로서 관리의 중요성이 날로 증대되고 있다. 또한 2012년 영양염류와 유기물 처리기준이 대폭 강화되었고 T-N의 경우 선진국에 미치지 못하는 수준으로 방류수 수질 기준은 향후 10 mg/L이하로 강화될 것으로 보고 있다. 본 연구에서는 강화된 공공하수처리시설 방류수 수질기준을 만족시키기 위하여 미생물 고정화 담체를 MLE공법에 적용하여 처리효율을 확인하였다. 방류수 수질 예측 프로그램인 EQPS(Effluent Quality Predication System)를 사용하여 미생물 고정화담체를 가장 적합하게 모사할 수 있는 반응조 lay-out을 구성하였다. 반응조 매개변수 보정을 위하여 실측값과 예측값을 비교하는 방법인 시행착오법을 수행하였다. 이를 위하여 유입하수의 성상 분석을 시행하였고 모델의 초기 입력값으로도 적용되었으며 구성된 모델을 이용하여 기존 연구실 규모의 실험에서는 적용할 수 없었던 다양한 환경변화에 대하여 처리 수질을 예측하였다. 구성된 lay-out을 이용하여 다양한 시나리오를 적용하기 전 기존 하수처리시설에서 사용되고 있던 활성슬러지를 이용한 MLE공법과 미생물 고정화담체공법의 처리효율을 비교하였다. 민감도 분석을 위한 매개변수로는 유입 원수 성상 중 VSS/TSS, SCOD/TCOD, SI/SCOD, XI/TCOD, TKN, SB, XU를 지정하여 결과값에 큰 영향을 미치는 순서대로 민감도가 높은 매개변수 4가지를 선정한 결과 TKN, SCOD/TCOD, VSS/TSS, SI/SCOD으로 나타났다. 다양한 환경변화에 따라 미생물 고정화 담체가 유연하게 적응이 가능한지 확인하기 위하여 HRT, 내부반송비, 온도, C/N 비 등에 대하여 시나리오를 적용하였다. 하폐수 처리에서 요구되는 다양한 운전조건의 범위를 설정하여 처리효율을 예측하고 최적 조건을 도출하였다. 본 공정이 반류수가 포함된 하수의 처리 시에도 유연한 운전이 가능한지 예측하기 위해 설정한 시나리오에서 질소의 유입 농도 149 mg/L의 반류수 포함 하수가 약 2개월 반 동안의 안정화 기간을 거친 후 유출수 T-N 농도가 일정하게 나타났으며 이때의 처리효율은 61.6 % 인 것은 확인할 수 있었다. MLE 공법의 생물학적 처리 반응조에서의 처리효율이므로 실제 process 구성에서는 전·후단의 처리가 요구된다. 안정적인 처리 수질을 확보하려면 담체만을 이용한 단일 공정으로는 무리가 있으며 공정 전단에 난분해성 물질을 분해할 수 있는 공정이 추가된다면 더 높은 처리효율을 나타낼 수 있을 것으로 예측되었다.
오염물질이 수계에 유입됨에 따라 효율적인 수질 관리에 많은 문제점을 유발하고 특히 하수 중 질소와 같은 영양염류는 부영양화를 유발시키는 주 원인물질로서 관리의 중요성이 날로 증대되고 있다. 또한 2012년 영양염류와 유기물 처리기준이 대폭 강화되었고 T-N의 경우 선진국에 미치지 못하는 수준으로 방류수 수질 기준은 향후 10 mg/L이하로 강화될 것으로 보고 있다. 본 연구에서는 강화된 공공하수처리시설 방류수 수질기준을 만족시키기 위하여 미생물 고정화 담체를 MLE공법에 적용하여 처리효율을 확인하였다. 방류수 수질 예측 프로그램인 EQPS(Effluent Quality Predication System)를 사용하여 미생물 고정화담체를 가장 적합하게 모사할 수 있는 반응조 lay-out을 구성하였다. 반응조 매개변수 보정을 위하여 실측값과 예측값을 비교하는 방법인 시행착오법을 수행하였다. 이를 위하여 유입하수의 성상 분석을 시행하였고 모델의 초기 입력값으로도 적용되었으며 구성된 모델을 이용하여 기존 연구실 규모의 실험에서는 적용할 수 없었던 다양한 환경변화에 대하여 처리 수질을 예측하였다. 구성된 lay-out을 이용하여 다양한 시나리오를 적용하기 전 기존 하수처리시설에서 사용되고 있던 활성슬러지를 이용한 MLE공법과 미생물 고정화담체공법의 처리효율을 비교하였다. 민감도 분석을 위한 매개변수로는 유입 원수 성상 중 VSS/TSS, SCOD/TCOD, SI/SCOD, XI/TCOD, TKN, SB, XU를 지정하여 결과값에 큰 영향을 미치는 순서대로 민감도가 높은 매개변수 4가지를 선정한 결과 TKN, SCOD/TCOD, VSS/TSS, SI/SCOD으로 나타났다. 다양한 환경변화에 따라 미생물 고정화 담체가 유연하게 적응이 가능한지 확인하기 위하여 HRT, 내부반송비, 온도, C/N 비 등에 대하여 시나리오를 적용하였다. 하폐수 처리에서 요구되는 다양한 운전조건의 범위를 설정하여 처리효율을 예측하고 최적 조건을 도출하였다. 본 공정이 반류수가 포함된 하수의 처리 시에도 유연한 운전이 가능한지 예측하기 위해 설정한 시나리오에서 질소의 유입 농도 149 mg/L의 반류수 포함 하수가 약 2개월 반 동안의 안정화 기간을 거친 후 유출수 T-N 농도가 일정하게 나타났으며 이때의 처리효율은 61.6 % 인 것은 확인할 수 있었다. MLE 공법의 생물학적 처리 반응조에서의 처리효율이므로 실제 process 구성에서는 전·후단의 처리가 요구된다. 안정적인 처리 수질을 확보하려면 담체만을 이용한 단일 공정으로는 무리가 있으며 공정 전단에 난분해성 물질을 분해할 수 있는 공정이 추가된다면 더 높은 처리효율을 나타낼 수 있을 것으로 예측되었다.
Because untreated pollutants enter the water system, it causes many problems in efficient water quality management, and especially nutrients such as nitrogen in sewage are the main cause of eutrophication. The importance of management is increasing day by day. In addition, in 2012, nutrient and orga...
Because untreated pollutants enter the water system, it causes many problems in efficient water quality management, and especially nutrients such as nitrogen in sewage are the main cause of eutrophication. The importance of management is increasing day by day. In addition, in 2012, nutrient and organic treatment standards have been strengthened, and T-N is less than developed countries. In this study, the microorganism immobilized media was applied to the MLE process to satisfy the effluent water quality standard of the public sewage treatment facility. Using the EQPS(Effluent Quality Predication System), a water quality prediction program, we constructed a reactor lay-out that simulates microorganism immobilized media. A trial and error method was performed to compare the measured and predicted values to correct the reactor parameters. For this purpose, the analysis of the characteristics of the influent sewage was carried out, and it was applied as the initial input value of the model, and the predicted water quality was simulated for various environmental changes that could not be applied in the existing laboratory-scale experiments using the constructed model. Before applying various scenarios using the lay-out, we compared the treatment efficiency of the MLE method with the activated sludge process used in the existing sewage treatment facility and the microorganism immobilized media technology. As parameters for sensitivity analysis, the ranking of sensitivity was selected in order of having a big influence on the result by designating VSS / TSS, SCOD / TCOD, SI / SCOD, XI / TCOD, TKN, SB, and XU among influent raw water properties. As a result of selecting the sensitivity ranking, it was found to be TKN, SCOD/TCOD, VSS/TSS, SI/SCOD. In order to check whether the microorganism immobilized media can be flexibly adapted to various environmental changes, scenarios were applied for HRT, internal recycle ratio, temperature, and C/N ratio. In the scenario set up to predict whether the process can be operated smoothly in the treatment of recyle water, the effluent T-N concentration after the sewage with influent concentration of 149 mg/L has been stabilized for about two and a half months. In order to secure stable water quality, a single process using only a immobilized media is unreasonable. If a process capable of removing non-degradable substances in added to front and end of the main process, it is expected that the treatment efficiency may be more higher.
Because untreated pollutants enter the water system, it causes many problems in efficient water quality management, and especially nutrients such as nitrogen in sewage are the main cause of eutrophication. The importance of management is increasing day by day. In addition, in 2012, nutrient and organic treatment standards have been strengthened, and T-N is less than developed countries. In this study, the microorganism immobilized media was applied to the MLE process to satisfy the effluent water quality standard of the public sewage treatment facility. Using the EQPS(Effluent Quality Predication System), a water quality prediction program, we constructed a reactor lay-out that simulates microorganism immobilized media. A trial and error method was performed to compare the measured and predicted values to correct the reactor parameters. For this purpose, the analysis of the characteristics of the influent sewage was carried out, and it was applied as the initial input value of the model, and the predicted water quality was simulated for various environmental changes that could not be applied in the existing laboratory-scale experiments using the constructed model. Before applying various scenarios using the lay-out, we compared the treatment efficiency of the MLE method with the activated sludge process used in the existing sewage treatment facility and the microorganism immobilized media technology. As parameters for sensitivity analysis, the ranking of sensitivity was selected in order of having a big influence on the result by designating VSS / TSS, SCOD / TCOD, SI / SCOD, XI / TCOD, TKN, SB, and XU among influent raw water properties. As a result of selecting the sensitivity ranking, it was found to be TKN, SCOD/TCOD, VSS/TSS, SI/SCOD. In order to check whether the microorganism immobilized media can be flexibly adapted to various environmental changes, scenarios were applied for HRT, internal recycle ratio, temperature, and C/N ratio. In the scenario set up to predict whether the process can be operated smoothly in the treatment of recyle water, the effluent T-N concentration after the sewage with influent concentration of 149 mg/L has been stabilized for about two and a half months. In order to secure stable water quality, a single process using only a immobilized media is unreasonable. If a process capable of removing non-degradable substances in added to front and end of the main process, it is expected that the treatment efficiency may be more higher.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.