본 논문에서는 유전체공진기를 이용한 X-band 도플러 레이더를 제안하였다. PCB의 전체 크기는 41x45mm^2 이며 유전체 공진기 발진기, 마이크로스트립 패치 안테나와 단일 평형 주파수 혼합기로 구성된다. 제안된 센서는 유전상수 4.3, 유전체 두께 0.787mm, 동박 두께 1/2 oz, 손실 ...
본 논문에서는 유전체공진기를 이용한 X-band 도플러 레이더를 제안하였다. PCB의 전체 크기는 41x45mm^2 이며 유전체 공진기 발진기, 마이크로스트립 패치 안테나와 단일 평형 주파수 혼합기로 구성된다. 제안된 센서는 유전상수 4.3, 유전체 두께 0.787mm, 동박 두께 1/2 oz, 손실 탄젠트 0.0018을 갖는 FR-4 기판에 설계 및 제작되었다. 제안된 센서의 측정 결과로 10.525 GHz 대역에서 발진 출력은 8.87 dBm 이며 100 kHz 오프셋 주파수에서 위상잡음은 –71.31 dBc/Hz이다. 마이크로스트립 패치 안테나의 이득은 7.71 dBi이며 빔폭은 83.27°(E-plane), 52.69°(H-plane) 이다. 센서의 동작 특성 확인을 위해 감지 거리 테스트를 실시하였으며 약 16 m 까지 검출되는 것을 확인했다. 본 센서의 적용 분야로는 조명의 전력절감, 출입문 시스템, 외부의 보안 시스템, 의료분야등 다방면으로 활용할 수 있을 것으로 기대된다.
본 논문에서는 유전체 공진기를 이용한 X-band 도플러 레이더를 제안하였다. PCB의 전체 크기는 41x45mm^2 이며 유전체 공진기 발진기, 마이크로스트립 패치 안테나와 단일 평형 주파수 혼합기로 구성된다. 제안된 센서는 유전상수 4.3, 유전체 두께 0.787mm, 동박 두께 1/2 oz, 손실 탄젠트 0.0018을 갖는 FR-4 기판에 설계 및 제작되었다. 제안된 센서의 측정 결과로 10.525 GHz 대역에서 발진 출력은 8.87 dBm 이며 100 kHz 오프셋 주파수에서 위상잡음은 –71.31 dBc/Hz이다. 마이크로스트립 패치 안테나의 이득은 7.71 dBi이며 빔폭은 83.27°(E-plane), 52.69°(H-plane) 이다. 센서의 동작 특성 확인을 위해 감지 거리 테스트를 실시하였으며 약 16 m 까지 검출되는 것을 확인했다. 본 센서의 적용 분야로는 조명의 전력절감, 출입문 시스템, 외부의 보안 시스템, 의료분야등 다방면으로 활용할 수 있을 것으로 기대된다.
In this paper, we proposed the design of a X-band doppler radar sensor for motion detection. The overall size of PCB is 41x45 and it consists of transistor oscillator with a dielectric resonator, power divider, two transmitting and receiving antenna composed of two microstrip patch and a single bala...
In this paper, we proposed the design of a X-band doppler radar sensor for motion detection. The overall size of PCB is 41x45 and it consists of transistor oscillator with a dielectric resonator, power divider, two transmitting and receiving antenna composed of two microstrip patch and a single balanced frequency mixer. It was designed and fabricated on an FR-4 substrate with a dielectric constant of 4.3, thickness of 0.787 mm, copper thickness of 1/2 oz and loss tangent of 0.0018. The output power of the oscillator has 8.87 dBm at 10.525 GHz, and the phase noise was -71.31 dBc / Hz at a frequency of 100 kHz offset. The gain of antenna is 7.71 dBi and beamwidths are 83.27° on the E-plane and 52.69° on the H-plane respectively. A motion detection test was conducted to confirm the operating characteristics of the sensor. As a result, it was confirmed that the maximum motion detection distance is 16 m. The proposed sensor is expected to be applied to various fields such as power saving of lighting, door systems, security systems outside buildings, and medical fields for motion detection.
In this paper, we proposed the design of a X-band doppler radar sensor for motion detection. The overall size of PCB is 41x45 and it consists of transistor oscillator with a dielectric resonator, power divider, two transmitting and receiving antenna composed of two microstrip patch and a single balanced frequency mixer. It was designed and fabricated on an FR-4 substrate with a dielectric constant of 4.3, thickness of 0.787 mm, copper thickness of 1/2 oz and loss tangent of 0.0018. The output power of the oscillator has 8.87 dBm at 10.525 GHz, and the phase noise was -71.31 dBc / Hz at a frequency of 100 kHz offset. The gain of antenna is 7.71 dBi and beamwidths are 83.27° on the E-plane and 52.69° on the H-plane respectively. A motion detection test was conducted to confirm the operating characteristics of the sensor. As a result, it was confirmed that the maximum motion detection distance is 16 m. The proposed sensor is expected to be applied to various fields such as power saving of lighting, door systems, security systems outside buildings, and medical fields for motion detection.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.