혐기성 유동층 반응기에서 지지체의 물리.화학적 특성과 메탄 발효 성능 사이의 관계 Relationship among Physical & Chemical Properties of Supports and Performance of Methane Fermentation in Anaerobic Fluidized-Bed Reactor원문보기
적은 에너지로 적절한 유동충을 유지하기 위한 가 장 좋은 지지체는 bulk 빛 wet밀도가 가장 작은 활 성탄이며 최소및최적유동화속도가각각0.03cm/sec, 0.25cm/sec로 나타났다. 메탄 발효에 대한 유 기물 부하의 증가에 따라 모든 지지체의 CODe, 제 거율은 감소하였으나, 활성탄은 본 실험범위의 유기 물 부하에서 90% 이상의 제거율을 보였다. 이는 매 우 큰 비표면적을 가지는 활성탄에 많은 미생물이 흡착된 때문으로 사료된다. 유기물 부하 $16gCOD_{cr}/\ell.day$16gCODcr/day에서 흡착된 마생물의 양은 157mg/g이다. 천연 제올라이트와 Roast Celite를 비교하면 바표 면적만에 비례하여 미생물의 양이 증가하지는 않음 을 알 수 았으며, 동엘한 비표면적을 가지는 Roast Celite와 부석을 비교하면, 유기물 제거능이 Roast Celite가 우수한데 이로부터 표면의 거칠기가 상대적으로 크고 표면전하가 양전하를 띠는 것이 마생물 흡착에 중요한 것으로 사료된다. 혐기성 유동층 반 응기에 이용할 지지체는 유체의 shear stress를 감소 시켜서 미생물 흡착을 증대시키기 위하여 될 수 있으면 작은 wet밀도와 작은 유동화 속도를 가져야 한다고 사료된다.
적은 에너지로 적절한 유동충을 유지하기 위한 가 장 좋은 지지체는 bulk 빛 wet밀도가 가장 작은 활 성탄이며 최소및최적유동화속도가각각0.03cm/sec, 0.25cm/sec로 나타났다. 메탄 발효에 대한 유 기물 부하의 증가에 따라 모든 지지체의 CODe, 제 거율은 감소하였으나, 활성탄은 본 실험범위의 유기 물 부하에서 90% 이상의 제거율을 보였다. 이는 매 우 큰 비표면적을 가지는 활성탄에 많은 미생물이 흡착된 때문으로 사료된다. 유기물 부하 $16gCOD_{cr}/\ell.day$16gCODcr/day에서 흡착된 마생물의 양은 157mg/g이다. 천연 제올라이트와 Roast Celite를 비교하면 바표 면적만에 비례하여 미생물의 양이 증가하지는 않음 을 알 수 았으며, 동엘한 비표면적을 가지는 Roast Celite와 부석을 비교하면, 유기물 제거능이 Roast Celite가 우수한데 이로부터 표면의 거칠기가 상대적으로 크고 표면전하가 양전하를 띠는 것이 마생물 흡착에 중요한 것으로 사료된다. 혐기성 유동층 반 응기에 이용할 지지체는 유체의 shear stress를 감소 시켜서 미생물 흡착을 증대시키기 위하여 될 수 있으면 작은 wet밀도와 작은 유동화 속도를 가져야 한다고 사료된다.
Active carbon which has the smallest bulk and wet density was found as the best support media among 4 different kinds of materials(celite, natural zeolite, Pusuk stone, active carbon) to make a proper fluidized-bed with small energy consumption. Its minimum and optimum fluidization velocity were fou...
Active carbon which has the smallest bulk and wet density was found as the best support media among 4 different kinds of materials(celite, natural zeolite, Pusuk stone, active carbon) to make a proper fluidized-bed with small energy consumption. Its minimum and optimum fluidization velocity were found as 0.03cm/sec and 0.25cm/sec, respectively. As organic loading rate for methane fermentation was increased, CODcr removal efficiencies of all the media were decreased. But, CODcr, removal efficiencies of active carbon was maintained more than 90% in this experimental range of the organic loading rate. Larger amount of microorganism was adsorbed on the active carbon which has very high specific surface area. At the organic loading rate of 16g CODcr,/l day, its adsorbed cell mass was 157mg/g. Comparing natural zeolite with roast celite, adsorbed cell mass did not increase in proportion to specific surface area of the media. Even though roast celite has the same specific surface area as the Pusuk stone, its organic removal ability was superior to that of the Pusuk stone, which explains that the relatively great surface roughness and the positive surface charge are important for cell adsorption. It was concluded that the support media for anaerobic fluidized reactor should have small wet density and small fuidization velocity, if possible, in order to increase cell adsorption by reducing the fluid shear stress.
Active carbon which has the smallest bulk and wet density was found as the best support media among 4 different kinds of materials(celite, natural zeolite, Pusuk stone, active carbon) to make a proper fluidized-bed with small energy consumption. Its minimum and optimum fluidization velocity were found as 0.03cm/sec and 0.25cm/sec, respectively. As organic loading rate for methane fermentation was increased, CODcr removal efficiencies of all the media were decreased. But, CODcr, removal efficiencies of active carbon was maintained more than 90% in this experimental range of the organic loading rate. Larger amount of microorganism was adsorbed on the active carbon which has very high specific surface area. At the organic loading rate of 16g CODcr,/l day, its adsorbed cell mass was 157mg/g. Comparing natural zeolite with roast celite, adsorbed cell mass did not increase in proportion to specific surface area of the media. Even though roast celite has the same specific surface area as the Pusuk stone, its organic removal ability was superior to that of the Pusuk stone, which explains that the relatively great surface roughness and the positive surface charge are important for cell adsorption. It was concluded that the support media for anaerobic fluidized reactor should have small wet density and small fuidization velocity, if possible, in order to increase cell adsorption by reducing the fluid shear stress.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.