Cobalt ferrite와 Pb(Zr, Ti) $O_{3}$ 복합체를 고상 반응법으로 제조하여, magnetoelectric 효과를 조사하였다. 소결 시간과 cobalt ferrite의 부피비가 증가함에 따라 magnetoelectric 전압 계수의 최대값이 증가하였다. 한편, 이 최댜값을 나타내는 자기장은 소결 시간 증가에 따라 낮은 쪽으로, cobalt ferrite 부피 증가에 따라 높은 쪽으로 이동하였다. 이러한 현상들은 각 상의 입자 크기 변화와 이에 따른 응력 전달 변화, 자화 및 분극 용이도로 설명되었다. 비화학당량 조성인 $Co_{1.02}$F $e_{1.98}$$O_{4}$를 사용하여, 이제까지 발표된 최대 효과보다 약 30% 높은 0.174 V/cm Oe 의 magnetoelectric 전압 계수 값을 얻었다.얻었다.
Cobalt ferrite와 Pb(Zr, Ti) $O_{3}$ 복합체를 고상 반응법으로 제조하여, magnetoelectric 효과를 조사하였다. 소결 시간과 cobalt ferrite의 부피비가 증가함에 따라 magnetoelectric 전압 계수의 최대값이 증가하였다. 한편, 이 최댜값을 나타내는 자기장은 소결 시간 증가에 따라 낮은 쪽으로, cobalt ferrite 부피 증가에 따라 높은 쪽으로 이동하였다. 이러한 현상들은 각 상의 입자 크기 변화와 이에 따른 응력 전달 변화, 자화 및 분극 용이도로 설명되었다. 비화학당량 조성인 $Co_{1.02}$F $e_{1.98}$$O_{4}$를 사용하여, 이제까지 발표된 최대 효과보다 약 30% 높은 0.174 V/cm Oe 의 magnetoelectric 전압 계수 값을 얻었다.얻었다.
We have studied magnetoelectric effect with cobalt ferrite-Pb(Zr, Ti) $O_3$ composites made by solid state reaction. The maximum magnetoelectric voltage coefficient, $(dE/ dH)_{max}$, increased with longer sintering time and higher volume fraction of the cobalt ferrite. The mag...
We have studied magnetoelectric effect with cobalt ferrite-Pb(Zr, Ti) $O_3$ composites made by solid state reaction. The maximum magnetoelectric voltage coefficient, $(dE/ dH)_{max}$, increased with longer sintering time and higher volume fraction of the cobalt ferrite. The magnetic field for $(dE/ dH)_{max}$ became lower with increasing the sintering time and decreasing the volume fraction of the cobalt ferrite. The phenomena were explained in terms of grain size change, mechanical coupling efficiency, easiness of magnetization and polarization. We obtained the highest magnetoelectric voltage coefficient of 0.174V/cm-Oe, which is about 30% higher than the best value reported.
We have studied magnetoelectric effect with cobalt ferrite-Pb(Zr, Ti) $O_3$ composites made by solid state reaction. The maximum magnetoelectric voltage coefficient, $(dE/ dH)_{max}$, increased with longer sintering time and higher volume fraction of the cobalt ferrite. The magnetic field for $(dE/ dH)_{max}$ became lower with increasing the sintering time and decreasing the volume fraction of the cobalt ferrite. The phenomena were explained in terms of grain size change, mechanical coupling efficiency, easiness of magnetization and polarization. We obtained the highest magnetoelectric voltage coefficient of 0.174V/cm-Oe, which is about 30% higher than the best value reported.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.