최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Structural engineering and mechanics : An international journal, v.6 no.3, 1998년, pp.275 - 289
Wong, M.B. (Monash University) , Ghojel, J.I. (Monash University) , Crozier, D.A. (Monash University)
The objective of the paper is to present a method whereby the time required for a steel structure to sustain the effects of a prescribed temperature rise according to real fire curves can be calculated. The method is divided into two parts. The first part deals with the post-yield behaviour of steel...
Barthelemy, B. (1976), "Heating calculation of structural steel members", J. St. Div., ASCE, 102(8), 1549-1558.
British Iron and Steel Research Association (1952), Physical Constants of Steels at Elevated Temperature, BISRA.
BSI (1995), "Eurocode 3-Design of steel structures, Part 1.2: General rules-Structural fire design".
Brockenbrough, R.L. (1970), "Theoretical stresses and strains from heat curving", J. St. Div., ASCE, 96(7), 1421-1444.
Chiou, Y.J., Tam, J.Q., Chen, J.M. and Chung, Y.C. (1991), "A numerical model for the fire response of steel structures", J. Chin. Inst. Engrg., 14(4), 397-406.
CIB (1983), Design Guide Structural Fire Safety, Fire Commission of the Conseil International du Batiment, Workshop CIB W14.
Crozier, D.A. and Wong, M.B. (1994), "Collapse temperature analysis of steel frames", Proceedings of the Australasian Structural Engineering Conference, Sydney, September, 1005-1010.
Crozier, D.A. and Wong, M.B. (1995), "A solution for elastoplastic analysis of structures under uniformly distributed loads", Proceedings of the Fifth East Asia-Pacific Conference on Structural Engineering & Construction, Gold Coast, Australia, July, 91-96.
CTICM (1982), "Methode de prevision par le calcule du comportement au feu des structures en acier", Construction Metallique, 19(3), 39-79.
ECCS (1983), European Recommendation for the Fire Safety of Steel Structures ECCS Technical Committee 3 - Fire Safety of Steel Structures, Elsevier, Amsterdam.
Edwards, D.K. and Matavosian, R. (1984), "Scaling rules for total absorptivity and emissivity of gases", J. Heat Transfer, 106, 684-689.
Edwards, D.K. and Matavosian, R. (1990), "Emissivity data for gases", Section 5.5.5, Hemisphere Handbook of Heat Exchanger Design, Ed, G.J. Hewitt, Hemisphere, New York.
Holman, J.P. (1986), Heat Transfer, McGraw Hill.
Iding, R. and Bresler, B. (1984), "Prediction of fire response of buildings using finite element methods", Proceedings of The Third Conference, Computing in Civil Engineering, San Diego, April.
Kirby, B.R. and Preston, R.R. (1988), "High temperature properties of hot-rolled, structural steels for use in fire engineering design studies", Fire Safety Journal, 13, 27-37.
Lie, T.T. (1992), Structural Fire Protection, ASCE Manuals and Reports on Engineering Practice No. 78.
Mills, A.F. (1992), Heat Transfer, Irwin Inc., 555-579.
Olawale, A.O. and Plank, R.J. (1988), "The collapse analysis of steel columns in fire using a finite strip method", Int. J. Num. Meth. Engrg., 26(12), 2755-2764.
Saab, H.A. and Nethercot, D.A. (1991), "Modelling steel frame behaviour under fire conditions", Eng. St., 13, 371-382.
Schleich, J.B., Dotreppe, J.C. and Franssen, J.M. (1985), "Numerical simulations of fire resistance tests on steel and composite structural elements or frames", Proceedings of the First International Symposium, Fire Safety Science, Oct., 311-323.
Smith, C.I. and Stirland, C. (1983), "Analytical methods and the design of steel framed buildings", International Seminar on three Decades of Structural Fire Safety, Fire Research Station, Herts, UK, 155-200.
Standards Australia (1990), AS4100 - 1990, Standards Australia, SA.
Tin-Loi, F. and Wong, M.B. (1989), "Nonholonomic computer analysis of elastoplastic frames", Comp. Meth. Appl. Mech. Engrg., 72, 351-364.
Ueda, Y., Rashed, S.M.H. and Nakacho, K. (1985), "New efficient and accurate method of nonlinear analysis of offshore tubular frames (the Idealized Structural Unit)", J. of Energy Resources Technology, ASME, 107, 204-211.
Wong, M.B. (1991), "Direct analytical methods for plastic design", Aust. Civil Eng. Trans., CE33(2), 81-86.
Wong, M.B. (1995), "Foundation settlement and its effects on the inelastic behaviour of structures", Proceedings of the Fourth International Conference on Structural Studies of Historical Buildings, Greece, May, 137-144.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.