최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.17 no.2 = no.107, 2000년, pp.15 - 32
Hardt, D., et al., 1997, Next-Generation Manufacturing (NGM) Project, Agility Forum and Leaders for Manufactring, Bethlehem, PA., 1997
Koren, Y., Ulsoy, A.G., Reconfigurable Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems(ERC/RMS) Report #1, The University of Michigan, Ann Arbor, MI, 1997
Matta, M., Tolio, T., Flexible and productive manufacturing system architecture. The 15th Int. Conf. on Production Research, August. Limerick, Ireland, 1999
Ulsoy, A.G. and Heytler, P., A Survey of Flexible and Reconfigurable Manufacturing Systems, Report #11, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), The University of Michigan, Ann Arbor, MI., 1998
Koren, Y., Jovane, F., and G. Pritschow (Eds.), Open Architecture Control Systems, Summary of Global Activity, ITIA Series, Vol. 2, 1998
Mehrabi, M.G., Ulsoy, A.G., State-of-the Art in Reconfigurable Manufacturing Systems, Report #2, Vol. 1 and Vol.11, Engineering Research Center for Reconfgurable Machining Systems(ERC/RMS), The University of Michigan, Ann Arbor, 1997
Aronson, R.B., Operation Plug-and-Play is on the Way, Manufacturing Engineering, pp. 108-112, 1997
AMT (Association for Manufacturing Technology) Report, A Technology Road Map for the Machine-Tool Industry, 1996
Ashley, S., Manufacturing Firms Face the Future, Mechanical Engineering, pp. 70-74, 1997
Garro, O., Martin, P., Towards New Architecture of Machine Tools, Int. J. Prod. Research, Vol. 10, No. 10, pp. 2403-2414, 1993
Koren, Y., Computer Control of Manufacturing Systems, McGraw-Hill, New York, NY. Chapter 10, 1983
Atkins, W.S. Management Consultants, Strategic Study on the EU Machine Tool Sector, 1990
Heisel, U., Michaelis, M., Rekonfigurierbare Werkzeugmaschinen. In: Zeitschrift fuer wirtschaftlichen Fabrikbetrieb ZwF 93, (10/1998), pp. 506-507, 1998
Pritschow, G., Daniel, Ch., Junghans, W., Sperling, W., Open System Controllers - A Challenge for the Future of the Machine Tool Industry, Annals of the CIRP, Vol. 42/1, pp. 449-452, 1993
Van Brussel, H., Braembussche, P.V., Robust Control of Feed Drives with Linear Motors, CIRP Annals, Vol. 47/1, pp. 325-328, 1998
Koren, Y., Kota, S., Reconfigurable Machine Tools, U.S. Patent, 1999
Paresis, C. et al., A Rapidly Deployable Manipulator System, Proc. IEEE ICRA, pp. 1434-1439, 1996
Fukuda, T., Ueyama, T., Autonomous Behavior and Control : IEEE Proc. ICRA, 1993
IMS Report, Joint International Research Programs into an Intelligent Manufacturing System, International Robotics and Factory Automation Centre (IROFA), 1990
Bollinger, J. et al., Visionary Manufacturing Challenges for 2020, National Research Council Report, National Academy Press, Washington, D.C., 1998
Lee, G.H., Reconfigurability Considerations in the Design of Components and Manufacturing Systems, International Journal of Advanced Manufacturing Technology, Vol. 13, No. 5, pp. 376-386, 1997
Thielemans, H. et al., HEDRA, Heterogeneous Distributed Real-time Architecture, Control Engineering Practice, Vol. 4, No. 2, pp. 187-193, 1996
Heisel, U., Maier, V., Lunz, E., Auslegung von Maschinenstrukturen mit Gelenkstab- Kinematik, In: wt Werkstattstechnik Vol. 88, Nr. 4, pp. 183-186, 1998
Mehrabi, M.G., Ulsoy, A.G., Koren, Y., Heytler, P., Future Trends in Manufacturing: A Survey of Flexible and Reconfigurable Manufacturing Systems, submitted to J, of Manufacturing Systems, 1998
Eversheim, W., Organisation in der Produktionstechnik, Band 4: Fertigung und Montage, Diisseldorf: VDI-Verlag, 1989
Sethi, A.K., Sethi, S.P., Flexibility in manufacturing: a survey, Int. J. Of Flexible Manufacturing Systems, (2), pp. 289-328, 1990
Grieco, A., Semeraro, O., Tolio, T., Toma, S., Simulation of tool and part flow in FMSs, International Journal of Production Research, Vol. 33, No. 3, pp. 643-658, 1995
Chryssolouris, G., Flexibility and its measurement, Annals of the CIRP, Vol. 45/2, pp. 581-587, 1996
Koren, Y., Hu, S.J., Weber, T.W., Impact of Manufacturing System Configuration on Performance, Annals of the CIRP, Vol. 47/1, pp. 369-372, 1998
Tolio, T., A. Matta, A method for performance evaluation of automated flow lines, Annals of the CIRP, Vol. 47/1, 1998
Nemeth, I., Fisette, P., and Van Brussel, H., Conceptual design of 3-axis machine tools, Proc. 32nd CIRP Int. Sem. on Man. Syst., K. U. Leuven, ISBN 90-73802-68-7, pp. 239-248, 1999
Tonshoff, H.K., Menzel, E., Hinkenhuis, H. and Nitidem, E., 1994, Intelligence in Machine Tools by Configuration 7th Int. Conference on Production / Precision Engineering, 4th Int. Conference on High Technology, 15-17 September 1994, Chiba, Japan Chiba 1994
Erixon, G., Modularity - the basis for Product and Factory Re-engineering, Annals of the CIRP, Vol. 45/1, pp. 1-4, 1996
Pasek, Z.J., et al., OpenFront: System Level Software for Configuration and Control of Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #21, The University of Michigan, Ann Arbor, MI
Shamoto, E., Moriwaki, T., Rigid XY Table for Ultraprecision Machine Tool Driven by Means of Waling Drive, Annals of the CIRP, Vol. 46/1, pp. 301-304, 1997
Heisel, U., Feinauer, A., Rudlaff, Th., Forderung an Hochgeschwindigkeits maschimen. wt-Prodktion und Management, Nr. 85, pp. 155-161, 1995
Pritschow, F., et al., 1998, Research and Development in the Field of Parallel Kinematics Systems in Europe, First European-American forum on Parallel Kinematics Machines:Theoretical Aspects and Industrial Requirements, September, Milano, Italy. To be published by Springer & Verlag in 1999
Heisel, U., Precision Requirements of Hexapod Machines and Investigation Results, First European-American forum on Parallel Kinematics Machines, Milano, 31-Aug.-1, Sept., 1998
Hissser, D., In der Werkzeug maschinentechnik bricht eire nerve Aera an, findustrie Anzeiger, Vol. 22, pp. 38-41, 1997
Weck, M., Giesler, A., Meylahn, A., Stainer, D., Parallel Kinematics - The Importance of Enabling Technologies, In: First European-American forum on Parallel Kinematics Machines, Milano, 31.-Aug. 1. Sept. 1998
Kota, S., Design of Reconfigurable Machine Tools, Proceedings of the CIRP International Seminar on Manufacturing Systems, Leuven, Belgium, May 24-26, 1999
Pritschow, G., et. al., Modular System Platform for Open Control Systems, Production Engineering Vol. 4, No. 2, 1997
Lutz, R. et.al., Konfigurierungs werkzeuge fur offene Steuerungen, Innovation durch Technik und Organisation, Berlin: Springer, 1997
Koren, Y., Pasek, Z.J., Ulsoy, A.G., Benchetrit, U., 1996, Real-Time Open Control Architectures and system performance, Annals of the CIRP, Vol. 45/1, pp. 377-380
Sperling, W. et al., 'OSACA ESPRIT 6379/9115 Final Report,' FISW GmbH, Stuttgart, Germany, 1996
HOMNOS, AbschluRbericht, VDW Forchungsberichet, Frankfurt, 19998
Spath, D., Mussa, S., ACCOMAT - Die genauigkeitsgeregelte Maschine, Wt Werkstaustechnik 89 Vol. 5, pp. 235-238, 1999
Hu, S.J., Steam of Variation Theory for Automotive Body Assembly, Annals of the CIRP, Vol. 46/1, pp. 1-4, 1997
Boer, C.R., Jovane, F., Towards a New Model of Sustainable Production: Manufuturing, Annals of the CIRP, Vol. 45/1, 1996
Jovane, F., Concepts for Strategic Machinery Innovation, Initial Meeting of ARMMS Networks, Bruselles - December, 1998
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.