최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.17 no.2 = no.107, 2000년, pp.137 - 143
남욱희 (평화 발레오(주)연구개발부) , 이춘열 (영남대학교 기계공학) , 채영석 (영남대학교 기계공학) , 권재도 (영남대학교 기계공학) , 배용탁 (영남대학교 대학원 기계공학) , 우승완 (영남대학교 대학원 기계공학부)
An automobile clutch diaphragm spring is operating in a closed clutch housing under high temperature and subject to high stress concentration in driving condition, which frequently causes cracks and fracture. The material of spring is required to possess sufficient fatigue strength and tenacity, whi...
H.G. Steinhagen, 'The Plate Clutch,' SAE 800978, 1980
F. Zimmermann and H. Oetting, 'An Automatic Dry Friction Clutch for Passenger Cars and Light Duty Trucks,' SAE 860383, 1986
J.J. Willyard, 'Heavy duty, Large Single Plate Diaphragm spring, Dry Clutches,' SAE 892476, 1989
U.H. Gomman, 'Gas nitriding : choosing metals for success,' Heat treating(march), pp. 19-23, 1991
R. Riedl, 'The Determination of Austenite Grain size in Ferrous Metals,' Metallography 14, pp. 119-128, 1981
J.O. Almen and A. Laszlo, 'The Uniform Section Disk Spring,' ASME, Vol. 58, pp. 305-314, 1936
G. Schremmer and Braunschweig, 'Dynamische Festigkeit von Tellerfedern,' KONSTRUKTION 17, pp. 473-479, 1965
W.A. Brecht and A.M. Wahl, 'The Radially Tapered Disk Spring,' Trans. ASME Vol. 52 part 1, pp. 43-55, 1930
I.C. Maycock, 'Improvements in Agricultural Tractor Clutch Performance,' SAE 831348, 1983
D. Holland and W. Dahl, 'Influence of tempering conditions on the toughness of high strength spring steels,' Wire 43, pp. 72-76, 1993
H.Berns and A.Fischer, 'Tribological stability of metallic materials at elevted temperatures,' Wear 162-164, pp. 441-449, 1993
J.M.Bello and B.J.Fernandez, 'Internal stresses induced by laser surface hardening of 50CrV4 steel-Effects on fatigue behaviour,' Welding International 1993 Vol. 7(2), pp. 106-114, 1993
Y. Murakami, 'Stress Intensity Factors Handbook,' Vol. 1, pp. 3
'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' ASTM E647-88a, 1991
J.Lu and J.F.Flavenot, 'Applications of the incremental hole-drilling method for measurement of residual-stress distribution,' Experimental Techniques, pp. 18-24, 1989
J.M.Bello and B.J.Fernandez, 'Fatigue performance and residual stresses in laser treated 50CrV4 steel,' Journal of meterials science 29, pp. 5213-5218, 1994
A.Taylor, 'An Introductions to X-Ray Metallography,' John Wiley & Sons, Inc., pp. 664, 1945
H.P.Klug and L.E.Alexander, 'X-ray diffraction procedures,' John Wiley & Sons, Inc., pp. 531-562, 1973
※ AI-Helper는 부적절한 답변을 할 수 있습니다.