참고문헌 (20)

1. Jung, H. K., and Kang, C. G., 'An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of Al-6 Pct Si-3 Pct Cu-0.3 Pct Mg Alloys for Thixoforimg,' Metallurgical and Materials Transactions A, Vol. 30A, No. 11, pp. 2967-2977, 1999 

   상세보기

2. Tzimas, E., and Zavaliangos, A., 'Mechanical Behavior of Alloys with Equiaxed Microstructure in the Semi-Solid State at High Solid Content,' Acta Materialia, Vol. 47, No. 2, pp. 517-528, 1999 

   상세보기

3. Jung, H. K., Kang, C. G., 'A Study on Solutions Avoiding Liquid Segregation Phenomena in Thixoforming Process of Scroll Component,' Metallurgical and Materials Transactions B, 2000, to be accepted 

   상세보기

4. Garat, M., Blais, S., Pluchon, C., and Loue, W. R., 'Aluminium Semi-Solid Processing : from the Billet to the Finished Part,' Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Colorado School of Mines, Colorado, USA, pp. xvii-xxxi, 1998 

5. Hirt, G., Cremer, R., Winkelmann, A., Witulski, T., Zillgen, M., 'Semi-Solid Forming of Aluminum Alloys by Direct Forging and Lateral Extrusion,' J. of Materials Processing Technology, Vol. 45, pp. 359-364, 1994 

   상세보기

6. Kang, C. G., Kang, S. S., and Jung, H. K., 'Influence of Process Parameters on the Defects in Thixoforming of Cast and Wrought Aluminum Alloys,' Advanced Technology of Plasticity, Vol. 3, pp. 1701-1706, 1999 

7. 大野 猛外 5人,'6061 アルミニウム 合金 のミクロ 組織および 機械的性質に及ぼす Mn, Zr の影響,' 經金屬, 第 48 卷, 第 2號, pp. 67-72, 1998 

8. 姜 孝京 外 2人, 'Al-Si-Cu系鑄造合金の凝固組織 に及ぼすストロンチウム及びTi-B添加冷却速度の影響,' 鑄造工學, 第 69卷, 第 5號, pp. 383-390, 1997 

9. 才川淸 外 3人, 'Al-Li系鑄造合金の鑄造性に及ぼすジルコンおよぴチタン添加の影響,' 鑄造學, 第 69卷, 第 6號, pp. 469-476, 1997 

10. 배원병, 강정윤, 이영석, 이성모, 홍창호, '알루미늄 주조/단조 공정에서 주조조직 제어에 관한 연구,' 한국정밀공학회지, Vol. 16, No. 9, pp. 41-47, 1999 

    원문보기 상세보기

11. Kang, C. G., Jung, H. K., Jung, K. D., and Lee, D. H., 'Thixoforming Process of Aluminum Materials with Globular Microstructure,' Proceedings of the Korea-French Int. Joint Workshop on Metal Forming, KAIST, Daejon, Korea, pp. 51-56, 1999 

12. Jung, H. K., and Kang, C. G., 'Effect of Alloying Element on the Mechanical Behavior and Superficial Defects in Thixoforged Components of Al-Si Alloys,' Key Engineering Materials, 2000, in Press 

13. Kang, C. G., and Jung, H. K., 'Finite Element Analysis with Deformation Behavior Modelling of Globular Microstructure in Forming Process of Semi-Solid Materials,' Int. J. of Mechanical Sciences, Vol. 41, No. 12, pp. 1423-1445, 1999 

    상세보기

14. Jung, H. K., Kim, N. S., and Kang, C. G., 'Development of an Automatic Mesh Generation (AMG) with Quadrilateral Elements and Remeshing Scheme for Thixoforming Process Design,' J. of Materials Engineering and Performance, 2000, in Press 

15. Jung, H. K., Kang, C. G., and Moon, Y. H., 'Induction Heating of Semi-Solid Billet and Control of Globular Microstructure to Prevent Coarsening Phenomena,' J. of Materials Engineering and Performance, Vol. 9, No. 1, pp. 1-12, 2000 

    상세보기

16. Jung, H. K., and Kang, C. G., 'Reheating Process of Cast and Wrought Aluminum Alloys for Thixoforging and Their Globularization Mechanism,' J. of Materials Processing Technology, 2000, in Press 

    상세보기

17. 山本 秀雄, 關口 常久, '各種 Al合金の鑄造. 鍛造,' 第 12 回 アルミニウム鍛造技術講座, pp.1-8, 1992 

18. Fujikawa, S., Kitamua, Y., and Shimamura, S., 'Application of Numerical Methods for the Aluminum Casting/Forging Process,' J. of Materials Processing Technology, Vol. 27, p. 93-110, 1991 

    상세보기

19. 櫻天久之, 'コンフオミックス法の以後の展開 ,' 第 19 回 アルミニウム鍛造委員會, pp. 1-33, 1994 

20. 神戶 洋史, 和夫 古岡, 英夫 三部, 隆宏 , 北岡 田治, 藤井 拓己, '鑄造鍛造 プロセスによる アルミニウムロ - ドホイ- ルの 實用化.' 輕金屬, 第 48 卷, 第 2 號, pp. 103-108, 1998 

저자의 다른 논문 :

강충길 (118) 최재찬 (73) 배원병 (76)