참고문헌 (23)

1. Oh, S. I., and Kobayashi, S., 'Finite element analysis of plante strain sheet bending,' Int. J. Mech. Sci., Vol. 22, pp. 583-594, 1979 

   상세보기

2. Tang, S. C., and Chappuis, L. B., 'Analysis of sheet metal forming process by a general thin shell element,' Proc. NUMIFORM '89, pp. 507-514, 1989 

3. Wang, N.M.;Budiansky,B. Analysis of sheet metal stamping by a finite element method J. Appl. Mech. Trans. ASME 

4. Honecker,A.;Mattiason,K. Finite element procedures for 3D sheet forming simulation Proc. NUMIFORM '89 

5. Hallquist, J. O., Wainscott, B., and Schweizerhof, K., 'Improved simulation of the sheet metal forming using LS-DYNA3D on parallel computers,' Proc. NUMISHEET '93, pp. 137-160, 1993 

6. Yang, D. Y., Chung, W. J., Song, I. S., Yoo, D. J., and Lee, J. H., 'Comparative investigation into implicit, explicit and iterative implicit/explicit schemes for simulation of sheet metal forming processes,' Proc. NUMISHEET '93, pp. 35-52, 1993 

7. Hughes, T. J. R., and Liu, W. K., 'Nonlinear finite element analysis of shells: Part Ⅰ. Three-dimensional shells,' Comp. Meth. Appl. Mech. Eng., Vol. 26, pp. 331-362, 1981 

   상세보기

8. Belytschko, T., Lin, J. I., and Tsay, C. S., 'Explicit algorithms for the nonlinear dynamics of shells,' Comp. Meth. Appl. Mech. Eng., Vol. 42, pp. 225-251, 1984 

   상세보기

9. Zhu, Y., and Zacharia, T., 'A new one-point quadrature, quadrilateral shell element with drilling degrees of freedom,' Comp. Meth. Appl. Mech. Eng., Vol. 136, pp. 165-203, 1996 

   상세보기

10. Finn, M. J., Galbraith, P. C., Wu, L., Hallquist, J. O., Lum, L., and Lin, T.-L., 'Use of a coupled explicit-implicit solver for calculating spring-back in automotive body panels,' J.Mat. Proc. Tech., Vol. 50, pp. 395-409, 1995 

    상세보기

11. Geiger, M., 'Synergy of laser material processing amdn metal forming,' Annals of the CIRP, Vol. 43, pp. 563-570, 1994 

12. Prange, W., Schneider, C., and Selige, A. J., 'Application of Laser-Beam-Welded Sheet Metal,' SAE Tech. Paper Series, No. 890853, 1989 

13. Proc. 2nd Symposium on Sheet Metal Forming (eds., Oh, S. I., Keum, Y. T., and Kim, H. J,), The Korean Society for Technology of Plasticity, Korea, 1998 

14. Shi, M. F., Pickett, K. M., and Bhatt, K. K., 'Formability issues in the application of tailor welded blank sheets,' SAE Tech. Paper Series, No.930278, 1993 

15. Ahmad, S., Irons, B. M., and Zienkiewiz, O. C., 'Analysis of thick and thin shell structures by curved finite elements.' Int. J. Num. Meth. Eng., Vol. 2, pp. 419-451, 1970 

    상세보기

16. Belytschko, T., Tsay, C. S., and Liu, W. K., 'A stabilization matrix for the bilinear Mindlin plate element,' Comp. Meth. Appl. Mech. Eng., Vol. 29, pp. 313-327, 1981 

    상세보기

17. Belytschko,T. and Leviathan,I. Projection schemes for one-point quadrature shell elements Comp. Meth. Appl. Mech. Eng., Vol.115, pp.277-286, 1994 

    상세보기

18. Belytschko, T., and Leviathan, I., 'Physical stabilization of 4-node shell element wit one-point quadrature,' Comp. Meth. Appl. Mech. Eng., Vol. 113, pp. 321-350, 1994 

    상세보기

19. Hill,R. A theory of the yielding and plastic flow of anisotropic metals Proc. Royal Soc. London Series A 

20. Barlat, F., Lege, D. J., and Berm, J. C., 'A six-component yield function for anisotropic materials,' Int. J. Plasticity, Vol. 7, pp. 693-712, 1991 

    상세보기

21. Zhong, Z. H., Finite Element Procedures for Contact-Impact Problems, Oxford University Press, New York, 1993 

22. Proc. NUMISHEET '93 (eds., Machinouchi, A., Nakamachi, E., Onate, E., and Wagoner, R. H.), 1993 

저자의 다른 논문 :

오수익 (31) 박종진 (26)