최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.17 no.3 = no.108, 2000년, pp.114 - 121
고성림 (건국대학교 기계설계학과) , 전근배 (건국대학교 기계설계학과 대학) , 이징구 (건국대학교 기계설계학과 대학원)
A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling ope...
S.L.Ko, D.Dornfeld, 'A Study on Burr Formation Mechanism,' Trans. of ASME, J. of Eng. for Materials and Technology, Vol. 113, pp. 75-87, 1991
S.L.Ko, J.K.Lee, G.B.Jun, 'Measurement Technology for Micro Burr,' Proceedings for 5th Int. Conf. on Deburring and Surface Finishing, SanFrancisco, pp. 314-326, Sep.29-Oct.1, 1998
고성림, 전근배, 이징구, 레이저를 이용한 효율적인 버측정방법에 관한 연구, 한국정밀공학회, 추계학술대회 논문집(I), pp. 75-78, 1998
T. Miyake, A.Yamamoto, K.Kitajima, Y.Yanaka and K.Takazawa, 'Syudy on Mechanism of Burr Formation in Drilling Deformation of Material during Burr Formation,' JSPE-57-03, Vol. 3, pp. 87-92, 1991
L.K.Gillespie and P.K.Blotter, 'The Formation and Properties of Machining Burrs,' Trans. of ASME, J. of Eng. for Industry, pp. 64-74, 1976
※ AI-Helper는 부적절한 답변을 할 수 있습니다.