최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.17 no.5 = no.110, 2000년, pp.63 - 69
김영수 (부경대학교 냉동공학과) , 김인관 (부경대학교 대학원)
The main target of this research is investigating the relations between mechanical properties and injection conditions, like injection pressure, packing pressure and packing time for various contents ratio of glass fiber and resin. In general idea, high injection pressure produces high strength of m...
Wang, K. K. et al., 'Computer Aided Injection Molding System,' CIMP Progress Report, No. 4, pp. 9-45, 1977
Tadmor, E., Broyor, E. and Gutifinger, c, 'Flow Analysis Network(FAN):A Method for Solving Flow Problems in Polymer Processing,' Polymer Eng. and Sci., Vol. 14, No. 9, pp. 660-665, 1974
Sherbelis, G. and Friedl, C., 'The importance of Flow Temperature Viscosity to CAE Injection Molding Simulation,' SPE ANTEC Technical Paper, Vol. 49, pp. 954-957, 1992
Kamal, M. R. and Kenig, S., 'The lnjection Molding of Thermoplastic,' Polymer Eng. and Sci., Vol. 12, pp. 295-301, 1972
Cox, H. W. and Mentzer, C. C., 'The Injection Molding:The effect of fill time on Properties,' Polymer Eng. and Sci., Vol. 26, 1986
Barry T. Dale, 'Compounding Processed Old News Print with Recycled high Density Polyethylene to make A substitute Lumber Product,' ANTEC, pp. 4232-4236, 1995
Scot T. Carter, 'A Study to Determine The Effects of High Density Polyethylene Contaminant and Heat histories on The Mechanical Characteristics of Polyethylene Terephthalate,' ANTEC, pp. 3743-3747, 1995
Michael J. Brues, Musa R. Kamal, David G. Cooper, 'Themolysis of Mixtures of Polyethylene and Ploystyrence, Using Virgin Polymers and Recycled Plastics,' ANTEC, pp. 3720-3725, 1995
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.