최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.17 no.7 = no.112, 2000년, pp.156 - 161
이응석 (충북대학교 기계공학부) , 김종길 (충북대학교 기계공학) , 신양기 (NC 공작기계협회)
Least Squares and Minimum Zone method are known for obtaining a datum or a continuous approximate function of measured data. This study is for a Minimum Zone algorithm for a circle, which is useful to obtain the exact roundness from the reference circle of measured data. The proposed method is compa...
British Standard BS 7172 : Assessment of position, size and departure for nominal of geometric feature, 1989
A.T.Scarr, 'Use of the Least Squares line and plane in the measurement of straightness and flatness,' Proc. Inst. Mech. Engrs. Vol. 182 Pt. 1, No. 23, pp. 531-536, 1968
E.S.Lee, 'Z-approaching minimum zone method for flatness and straightness error measurement,' IJSME, Vol. 39 No. 3, pp. 667-670, 1996
M.G.Cox and P.M.Harris, 'Assessing fundamental geometric form from measured coordinate data,' MATADOR Conference, U.K. pp. 655-662, 1992
이일환, 박희재, '비젼을 이용한 기어 측정 시스템 개발,' pp. 485-489, 1996
R.E.Reason, 'Report on the measurement of roundness,' A.R.C.S. pp. 116-119, 1966
D.G.Chetwynd and P.H.Phillipson, 'An investigation of reference criteria used in roundness measurement,' The Institute of Physics, pp. 531-538, 1980
Donald W. Hearn etc., 'Efficient algorithm for the (Weighted) Minimum circle problem,' Operational Research, Vol. 30, No. 4, 1982
※ AI-Helper는 부적절한 답변을 할 수 있습니다.