최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기KSME international journal, v.14 no.9, 2000년, pp.978 - 984
Oh, Dong-Joon (Korea Atomic Energy Research Institute) , Howard, I.C. (The university of Sheffield) , Yates, J.R. (The university of Sheffield)
The aim of this study is to investigate the ductile fracture behaviour under Mode I loading using SA533B pressure vessel steel. Experiments consist of the Round Notch Bar Test (RNB), Single Edge Crack Bending Test (SECB), and V-Notch Bar Test (VNB). Results from the RNB test were used to tune the da...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Bilby, B. A., et al., 1993. 'Prediction of the First Spinning Cylinder Test Using Ductile Dam age Theory,' Fatigue And Fracture of Engineering Materials and Structures, 16, pp. 1-20
Devaux, J. C. et al., 1985, 'Experimental and Numerical Validation of Local Ductile Fracture Criterion Based on Simulation of Cavity Growth,' Nonlinear Fracture Mechanics: V. II ASTM STP 995, J. D. edited by Landes et al. pp 7-23
Franklin, A. G., 1969, 'Comparison Between a Quantitative Microscope and Chemical Methods for Assessment of Non-Metallic Inclusions,' Journal of Iron and Steel Institues, pp. 18 -186
Han-Ki Yoon et al., 1999, 'Evaluation on Elastic Fracture Toughness of SA533B-1 Steel by Load Ratio Analysis and Multiple Specimen Method,' Journal of KSME, Vol. 23, No.9, pp 1598-1605
Hay, E. et al., 1981, 'A. D. C. Potential Drop Method to Monitor Crack Growth in Notches Subjected to Torsion,' Fatigue and Fracture of Engineering Materials and Structures 4, pp. 287-290
Li. at al, , 1994, 'A Study of the Interna Parameters of Ductile Damage Theory,' Fatigue Fract. Mater. Struct. 17 pp. 1075 -1087
Rousellier, G., 1987, 'Ductile fracture models and their potential in-local approach of fracture' Nuclear Engineering and Design, 105: pp. 97-111
Suresh, S. et al., 1987, 'Combined Mode I-Mode III Fracture of Fatigue Precracked Alumina,' Journal of American Ceramic Society, 70, pp. 726-733
Underwood, E. E., et al., 1985, 'Quantitative ractography,' ASM Metals Handbook 12 Fractography (9th Ed.) pp. 193-210
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.