초록

AI-Helper

본 연구에서는 실험을 통해 용접이음부의 형상 및 구속도의 크기 등을 변화시켜 측정한 용접 각변형량과 FEM해석을 이용한 해석결과로부터 구속계수를 유도하고 이를 고려한 등가하중을 결정하는 새로운 방법을 제시하였다. 새롭게 제시한 등가하중 결정 방법에 의한 수치해석결과는 실험결과와 잘 일치하여 그 타당성이 검증되었으며, 크기와 형상에 관계없이 대형구조물의 용접변형량을 예측하는데도 확대 적용할 수 있다. 한편 용접이음부 형상에 따른 구속에 대한 영향을 보면 맞대기용접의 경우 구속계수를 고려하지 않으면 실제 변형량보다 변형이 크게 발생하여 구속에 대한 영향을 크게 받으며 필렛용접의 경우 구속계수의 고려 유 무에 관계없이 거의 같은 변형량이 발생함으로써 구속에 대한 영향이 작음을 알 수 있었다.

Abstract ▼ AI-Helper

This study presents new method in which to derive the constraint coefficient from the quantity of angular deformation by welding measured by varying the shape of welded joints and the magnitude of constraints by varying the shape of welded joints and the magnitude of constraints by experiment and fr...

This study presents new method in which to derive the constraint coefficient from the quantity of angular deformation by welding measured by varying the shape of welded joints and the magnitude of constraints by varying the shape of welded joints and the magnitude of constraints by experiment and from the result analyzed by elastic FEM method and then to decide equivalent load with it The numerical analysis results by this new method verified the validity by agreeing with the experimental result on specimen. In addition These results are applicable to the prediction of the quantity of welding deformation for large structures regardless of the size and the shape While in the effects of the constraints based on the shape of welded joints in the case of Butt welding when the constraint coefficients are not considered the deformed quantity is produced larger than one by the experiment and consequently is largely affected by the constraints But in the case of Fillet welding the deformed quantity is seldom affected regardless of considering the constraint coefficients or not.

주제어