최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.25 no.4 = no.187, 2001년, pp.564 - 573
이인섭 (영남대학교 대학원 기계공학과) , 이동주
The mechanical properties of short carbon/glass fiber reinforced polypropylene are experimentally measured as functions of fiber content and nozzle diameter. Also, these properties are compared with the survival rate of reinforced fibers and fiber volume fraction using image analysis after pyrolytic...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kelly, A. and Tyson, W. R., 1965, 'Tensile Properties of Fiber-Reinforced Metals : Copper/Tungsten and Copper/Molybdenum,' J. Mech. Phys. Solids, Vol. 13, pp. 329-350
Hancock, P. and Cuthbertson, R. C., 1970, 'The Effect of Fibre Length and Interfacial Bond in Glass Fibre-Epoxy Resin Composites,' J.Mater Sci. 5, pp. 762-768
Bowyer, W. H. and Bader, M. G., 1972, 'On the Reinforcement of Thermoplastics by Imperfectly Aligned Discontinuous Fibres,' J. Mater. Sci, 7, pp. 1315-1321
Ohsawa, T. Nakayama, A. Miwa, M. and Hasegawa, A., 1978, 'Temperature Dependence of Critical Fiber Length for Glass Fiber-Reinforced Thermosetting Resin,' J. Appl. Polym. Sci, Vol. 22, pp. 3203-3212
Miwa, M. Ohsawa, T. and Tahara, K., 1980, 'Effect of Fiber Length on the Tensile Strength of Epoxy/Glass Fiber and Polyester/Glass Fiber Composites,' J. Appl. Polym. Sci, Vol. 25, pp. 795-807
Turkovich, R. V. and Erwin, L., 1983, 'Fiber Fracture in Reinforced Thermoplastic Processing,' Polym. Eng. Sci, Vol. 23, No. 13, pp. 743-749
Silverman, E. M., 1987, 'Effect of Glass Fiber Length on the Creep and Impact Resistance of Reinforced Thermoplastics,' Polym. Composites, Vol. 8, No. 1, pp. 8-15
Fischer, G. and Eyerer, P., 1988, 'Measuring Spatial Orientation of Short Fiber Reinforced Thermoplastics by Image Analysis,' Polym. Composites, Vol. 9, No. 4, pp. 297-304
Spahr, D. E. Friedrich, K. Schultz, J. M. and Bailey, R. S., 1990, 'Microstructure and Fracture Behaviour of Short and Long Fiber-Reinforced Polypropylene Composites,' J. Mater. Sci, 25, pp. 4427-4439
Landis, C. M. Mcglockton, M. A. and Mcmeeking, R. M., 1999, 'An Improved Shear Lag Model for Broken Fibers in Composite Materials,' J. Composite Material, Vol. 33, No. 7, pp. 667-680
Fu, S. Y. Lauke, B. Mader, E. Hu, X. and Yue, C. Y., 1999, 'Fracture Resistance of Short-Glass Fiber-Reinforced and Short-Carbon Fiber-Reinforced Polypropylene under Charpy Impact Load and its Dependence on Processing,' J. Materials. Processing Technology, 89-90, pp. 501-507
Inberg, J. P. F. Hunse, P. H. and Gaymans, R. J., 1999, 'Long Fiber Reinforcedment of Polypropylene/Polystyrene Blends,' Polym. Eng. Sci, Vol. 39, No. 2, pp. 340-346
Nabi, Z. U. and Hashemi, S., 1998, 'Influence of Short Glass Fibers and Weldlines on the Mechanical Properties of Injection-Moulded Acrylonitrile-Styrene acrylate copolymer,' J. Mater. Sci, 33, pp. 2985-3000
Dong-Joo Lee., 1996, 'On Studies of Tensile Properties in Injection Molded Short Carbon Fiber Reinforced PEEK Composite,' KSME Journal, Vol. 10, No. 3, pp. 362-371
Gibson, R. F., 1994, 'Principles of Composite Material Mechanics,' McGraw-Hill, pp. 156-189
Hui, C. Y. and Shia, D., 1998, 'Simple Formulae for the Effective Moduli of Unidirectional Aligned Composites,' Polym. Eng. Sci, Vol. 38, No. 5, pp. 774-782
Annual Handbook of ASTM Standard, 1995, 'Standard Test Method for Tensile Properties of Plastics,' ASTM D638M-93, pp. 59-67
Truckenmuller, F. and Fritz, H. G., 1991, 'Injection Molding of Long Fiber-Reinforced Thermoplastics : A Comparision of Extruded and Pultruded Materials with Direct Addition of Roving Strands,' Polym. Eng. Sci, Vol. 31, No. 18, pp. 1316-1329
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.