최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.39 no.1 = no.236, 2002년, pp.45 - 50
이주신 (경성대학교 재료공학과) , 문지훈 (경성대학교 재료공학과) , 한병동 (한국기계연구원 재료기술연구부) , 박동수 (한국기계연구원 재료기술연구부) , 김해두 (한국기계연구원 재료기술연구부)
Effect of sintering additives on the densification behavior of reaction-bonded silicon nitride prepared by using coarse Si powders is discussed. Sintering additives such as 6 wt%
J. Kor. Ceram. Soc. 38 740 2001
Ziegler, G., Heinrich, J., W�tting, G.. Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride. Journal of materials science, vol.22, no.9, 3041-3086.
Kuzjukēvičs, Anatolijs, Ishizaki, Kozo. Sintering of Silicon Nitride with YAIO3 Additive. Journal of the American Ceramic Society, vol.76, no.9, 2373-2375.
Goto, Y., Thomas, G.. Phase transformation and microstructural changes of Si3N4 during sintering. Journal of materials science, vol.30, no.9, 2194-2200.
Kolitsch, U., Seifert, H. J., Ludwig, T., Aldinger, F.. Phase equilibria and crystal chemistry in the Y2O3-Al2O3-SiO2 system. Journal of materials research, vol.14, no.2, 447-455.
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.