$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

초록이 없습니다.

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 여기서는 보고된 금속 나노 분말의 제조방법들 중에서 가능성이 커 보이는 몇 가지 방법에 대하여 상술하고자 한다. 단, 금속 나노분 말(1차입자 기준)을 제조하는 가장 일반적인 방법에 해당하는 기계적 합금화법(또는 고에너지 분쇄법)에 대해서는 여러 문헌 및 소개 자료에서 다양하고 상 세하게 다루고 있기 때문에 본고에서는 생략한다.
  • 둘째는 광학적으로 투명한 소재 내부에 분산시키 거나 표면에 부착(코팅)시켜 사용하는 광학적 응용에 관한 것이다. 발광소재로 사용되는 CdS의 경우, 분말 입자의 크기가 작아짐에 따라 청색천이 (blue shift)가 관찰되었으며, 12)CdSe의 경우에는 현저한 청색천이가 관찰되었다(양자크기 효과(quantum size effect)).
  • 활성을 갖는 나노크기의 금속분말을 제조하고 이를 활용하기 위해서는 특별한 대책이 필요하다. 본고에서는 금속소재를 포함한 전반적인 나노분말 소재의 합성법 및 응용 분야를 제시하고자 한다. 금 속나노분말이 갖는 근본적인 문제점 및 제한된 해결 방안 등의 이유로 대부분의 기술(記述) 내용은 세라 믹계 나노분말소재에 관한 것이 될 것이다.
  • 현재는 나노분말의 물성보다는 물성측정이 용이한 체적 나노소재의 물성에 대한 자료가 많 고 이로부터 나노분말소재의 특성을 유추해 볼 수 있 다(체적 나노소재의 전반적인 물성에 대해서는 참고 문헌[45-50]를 참고하기 바람). 여기서는 나노분말소 재로 이용될 수 있는 몇 가지 경우에 있어서 나타나는 특성 몇 가지를 소개하고자 한다.
  • 이는 금속 나노분말을 합성하는 것이 용이하지 않다는 것을 의미하는 것이며 근 본적으로는 앞서 얘기한 것처럼 금속 나노분말의 강한 활성에 원인이 있다. 여기서는 보고된 금속 나노 분말의 제조방법들 중에서 가능성이 커 보이는 몇 가지 방법에 대하여 상술하고자 한다. 단, 금속 나노분 말(1차입자 기준)을 제조하는 가장 일반적인 방법에 해당하는 기계적 합금화법(또는 고에너지 분쇄법)에 대해서는 여러 문헌 및 소개 자료에서 다양하고 상 세하게 다루고 있기 때문에 본고에서는 생략한다.
본문요약 정보가 도움이 되었나요?

참고문헌 (37)

  1. MRS Bull. 15 60 1990 

  2. Siegel, R. W., Ramasamy, S., Hahn, H., Zongquan, L., Ting, L., Gronsky, R.. Synthesis, characterization, and properties of nanophase TiO2. Journal of materials research, vol.3, no.6, 1367-1372.

  3. Hahn, H., Averback, R. S.. The production of nanocrystalline powders by magnetron sputtering. Journal of applied physics, vol.67, no.2, 1113-1115.

  4. Skandan, G., Hahn, H., Parker, J.C.. Nanostructured Y2O3: Synthesis and relation to microstructure and properties. Scripta metallurgica et materialia, vol.25, no.10, 2389-2393.

  5. Metals & Mater. 3 188 1999 

  6. Fernández, A., Reddy, E.P., Rojas, T.C., Sánchez-López, J.C.. Application of the gas phase condensation to the preparation of nanoparticles. Vacuum, vol.52, no.1, 83-88.

  7. Calka, A., Radlinski, A. P., Shanks, R. A., Pogany, A. P.. Formation of titanium silicides by mechanical alloying. Journal of materials science letters, vol.10, no.12, 734-737.

  8. Tomita, Masato, Saito, Yahachi, Takayoshi Hayashi. LaC2 Encapsulated in Graphite Nano-Particle. Japanese journal of applied physics. Part 2, Letters, vol.32, no.b2, L280-.

  9. Hwang, J.-H., Dravid, V. P., Teng, M. H., Host, J. J., Elliott, B. R., Johnson, D. L., Mason, T. O.. Magnetic Properties of Graphitically Encapsulated Nickel Nanocrystals. Journal of materials research, vol.12, no.4, 1076-1082.

  10. Champion, Y., Bigot, J.. Synthesis and structural analysis of aluminum nanocrystalline powders. Nanostructured materials, vol.10, no.7, 1097-1110.

  11. Lin, Jyung‐Dong, Duh, Jenq‐Gong. Coprecipitation and Hydrothermal Synthesis of Ultrafine 5.5 mol% CeO2‐2 mol% YO1.5ZrO2 Powders. Journal of the American Ceramic Society, vol.80, no.1, 92-98.

  12. Am. Ceram. Soc. Bull. 64 1115 1985 

  13. Groot Zevert, W. F. M., Winnubst, A. J. A., Theunissen, G. S. A. M., Burggraaf, A. J.. Powder preparation and compaction behaviour of fine-grained Y-TZP. Journal of materials science, vol.25, no.8, 3449-3455.

  14. Ding, Xing-Zhao, Qi, Zhen-Zhong, He, Yi-Zhen. Effect of hydrolysis water on the preparation of nano-crystalline titania powders via a sol-gel process. Journal of materials science letters, vol.14, no.1, 21-22.

  15. Sato, Tsugio, Dosaka, Kenji, Yoshioka, Toshiaki, Okuwaki, Akitsugu, Torii, Kazuo, Onodera, Yoshiro. Sintering of Ceria‐Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air. Journal of the American Ceramic Society, vol.75, no.3, 552-556.

  16. MAZDIYASNI, K. S., LYNCH, C. T., SMITH, J. S.. Preparation of Ultra‐High‐Purity Submicron Refractory Oxides. Journal of the American Ceramic Society, vol.48, no.7, 372-375.

  17. Sawaguchi, Akihiro, Toda, Kohji, Niihara, Koichi. Mechanical and Electrical Properties of Silicon Nitride–Silicon Carbide Nanocomposite Material. Journal of the American Ceramic Society, vol.74, no.5, 1142-1144.

  18. Vemury, Srinivas, Pratsinis, Sotiris E., Kibbey, Lowinn. Electrically Controlled Flame Synthesis of Nanophase TiO2, SiO2, and SnO2 Powders. Journal of materials research, vol.12, no.4, 1031-1042.

  19. Fukui, Takehisa, Oobuchi, Takeshi, Ikuhara, Yumi, Ohara, Satoshi, Kodera, Kaseki. Synthesis of (La,Sr)MnO3-YSZ Composite Particles by Spray Pyrolysis. Journal of the American Ceramic Society, vol.80, no.1, 261-263.

  20. Tsuzuki, T, Pirault, E, McCormick, P.G. Mechanochemical synthesis of gadolinium oxide nanoparticles. Nanostructured materials, vol.11, no.1, 125-131.

  21. CANNON, W.R., DANFORTH, S.C., FLINT, J.H., HAGGERTY, J.S., MARRA, R.A.. Sinterable Ceramic Powders from Laser‐Driven Reactions: I, Process Description and Modeling. Journal of the American Ceramic Society, vol.65, no.7, 324-330.

  22. Danforth, S.C.. Synthesis and processing of ultrafine powders for Si3N4 ceramics. Nanostructured materials, vol.1, no.3, 197-202.

  23. 10.1002/(SICI)1521-4095(199909)11:13<1101::AID-ADMA1101>3.0.CO;2-O 

  24. Gleiter, H.. Nanocrystalline materials. Progress in materials science, vol.33, no.4, 223-315.

  25. Gleiter, H.. Materials with ultrafine microstructures: Retrospectives and perspectives. Nanostructured materials, vol.1, no.1, 1-19.

  26. Gleiter, Herbert. Nanostructured Materials. Advanced materials, vol.4, no.7, 474-481.

  27. Wakefield, G., Keron, H.A., Dobson, P.J., Hutchison, J.L.. Structural and optical properties of terbium oxide nanoparticles. The Journal of physics and chemistry of solids, vol.60, no.4, 503-508.

  28. Demetry, Chrysanthe, Shi, Xinlan. Grain size-dependent electrical properties of rutile (TiO2). Solid state ionics, vol.118, no.3, 271-279.

  29. Liu, Dean-Mo. Adsorption, rheology, packing, and sintering of nanosize ceramic powders. Ceramics international, vol.25, no.2, 107-113.

  30. 10.1021/j100888a024 

  31. 10.1021/j100491a016 

  32. Ceram. Bull. 59 1208 1980 

  33. Skandan, G., Foster, C.M., Frase, H., Ali, M.N., Parker, J.C., Hahn, H.. Phase characterization and stabilization due to grain size effects of nanostructured Y2O3. Nanostructured materials, vol.1, no.4, 313-322.

  34. MAITI, H. S., GOKHALE, K. V. G. K., SUBBARAO, E. C.. Kinetics and Burst Phenomenon in ZrO2 Transformation. Journal of the American Ceramic Society, vol.55, no.6, 317-322.

  35. MITSUHASHI, T., FUJIKI, Y.. Phase Transformation of Monoclinic ZrO2 Single Crystals. Journal of the American Ceramic Society, vol.56, no.9, 493-493.

  36. Chou, Ting C., Nieh, Tai G.. Nucleation and Concurrent Anomalous Grain Growth of α‐Al2O3 During γ ‐ α Phase Transformation. Journal of the American Ceramic Society, vol.74, no.9, 2270-2279.

  37. Ahn, Jae-Pyoung, Park, Jong-Ku, Kim, Gyeungho. Effect of compact density on phase transition kinetics from anatase phase to rutile phase during sintering of ultrafine titania powder compacts. Nanostructured materials, vol.10, no.6, 1087-1096.

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로