최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.26 no.11 = no.206, 2002년, pp.2336 - 2341
박준석 (서울시립대학교 대학원 기계정보공학과) , 김성원 (서울대학교 대학원 재료공학부) , 권원태 (서울시립대학교 기계정보공학과) , 강신후 (서울대학교 재료공학부)
When WC and group IV elements are added to Ti(C,N)-Ni cermet, microstructures of the cermet is changed. The change effects directly on the property of the material. In this study, the amount of WC and group IV elements of Ti(C,N) cermet tool was investigated. The composition of WC was changed from 5...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Moskowitz, D. and Humenik, M. Jr., 1966, 'Cemented Titanium Carbide Cutting Tools,' Mod. Dev. in PM, (3), pp. 83-94
Zhang, S., 1993, 'Titanium Carbonitride-Based Cermets : Process and Properties,' Mat. Sci. and Eng., A163, pp. 141-148
Matsubara, H., Shin, S. and Sakuma, T., 1992, 'Grain Growth of TiC and Ti(C,N) Base Cermet During Liquid Phase Sintering,' Solid State Phenomena, 25 & 26, pp. 551-558
Suzuki, H., Matsubara, H. and Saitoh, T., 1983, 'The Microstructures of Ti(C,N)-Mo2C-Ni Cermet Affected by WC Addition,' Japan Soc. of pow. and pow. Metall. 31(7), pp. 236-240
Miller, D. J. and Pask, J. A., 1983, 'Liquid Phase Sintering of TiC-Ni Composites,' J. Am. Cer. Soc., 66(12), pp. 841-846
Humenik, M. and Parikh, N. M., 1956 'Cermets: I, Fundamental Concepts Related to Microstructure and Physical Properties of Cermets Systems,' JAm. Cer. Soc, 39(2), pp. 60-63
D'Errico, G., Guglielmi, E., 1998, 'A Comparative Study of PVD Coated Cermet Insert for Milling Application,' J. of Mat. Processing Technology 78, pp. 48-52
Rie, K. T., Gebauer, A., Wohle, J., 1997, 'Plasma Assisted CVD for Low Temperature Coatings to Improve the Wear and Corrosion Resistance,' Surface and Coating Technology 86-87, pp. 498-506
Tonshoff, H. T., Blawit, C., 1997, 'Development and Evaluation of PACVD Coated Cermet tools,' Surface and Coating Technology 93, pp. 119-127
Beckwith, T. G., Marangoni, R. D., Lienhard V. J. H., 'Mechanical Measurements,' Addison Wesley, Fifth Edition
Maeng, M. J., Chung, J. K., 1995, 'A Study on the Cutting Resistance and Acoustic Emission Signal due to Increasing Tool Wear in Turning' Jour. of KSMTE, Vol. 4, No.2, pp. 18-24
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.