최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of precision engineering and manufacturing, v.13 no.6, 2012년, pp.941 - 946
Kim, Yong-Sun (Department of Mechanical and Information Engineering, University of Seoul) , Kwon, Won-Tae (Department of Mechanical and Information Engineering, University of Seoul) , Seo, Moon-Su (Department of Material Science and Engineering, Seoul National University) , Kang, Shin-Hoo (Department of Material Science and Engineering, Seoul National University)
Ti(C,N)-based cermets were recently designed for tool applications as they offer enhanced interfacial strength. Such a cermet exhibits a typical core/rim microstructure as found in conventional cermets. To determine the possibility of using new cermet as a cutting tool, Ti(C,N) along with various ca...
J. Mat. Proc. Tech. L. A. Dobrzanski 157-158 304 2004 10.1016/j.jmatprotec.2004.09.048 Dobrzanski, L. A., Golombek, K., Kopac, J., and Sokovic, M., “Effect of depositing the hard surface coating on properties of the selected cemented carbide and tool cermets,” J. Mat. Proc. Tech., Vol. 157-158, pp. 304-311, 2004.
Int. J. Refrac. Met. Hard Mater. X. Zhang 27 3 653 2009 10.1016/j.ijrmhm.2008.10.009 Zhang, X., Liu, N., Yang, H., and Zheng, Y., “Boronizing of nano-TiN modified TiC-based cermets,” Int. J. Refrac. Met. Hard Mater., Vol. 27, No. 3, pp. 653-658, 2009.
Int. J. Mach. Tools Manuf. V. R. Dizaji 47 5 768 2007 10.1016/j.ijmachtools.2006.09.012 Dizaji, V. R., Rahmani, M., Sani, M. F., Nemati, Z., and Akbari, J., “Microstructure and cutting performance investigation of Ti(C, N)-based cermets containing various types of secondary carbides,” Int. J. Mach. Tools Manuf., Vol. 47, No. 5, pp. 768-772, 2007.
Int. J. Mach. Tools Manuf. W. T. Kwon 44 4 341 2004 10.1016/j.ijmachtools.2003.10.023 Kwon, W. T., Park, J. S., Kim, S.-W., and Kang, S., “Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet tools,” Int. J. Mach. Tools Manuf., Vol. 44, No. 4, pp. 341-346, 2004.
Int. J. Refrac. Met. Hard Mater. N. Liu 24 6 445 2006 10.1016/j.ijrmhm.2005.09.001 Liu, N., Chao, S., and Yang, H., “Cutting performances, mechanical property and microstructure of ultra-fine grade Ti(C, N)-based cermets,” Int. J. Refrac. Met. Hard Mater., Vol. 24, No. 6, pp. 445-452, 2006.
J. Mat. Proc. Tech. N. Liu 161 3 478 2005 10.1016/j.jmatprotec.2004.07.087 Liu, N., Xu, Y. D., Li, H., Chen, M. H., Zhou, J., Xie, F., and Yang, H. D., “Cutting and wearing characteristics of TiC-based cermets cutters with nano-TiN addition,” J. Mat. Proc. Tech., Vol. 161, No. 3, pp. 478-484, 2005.
J. Mat. Sci. Y.-M. Ko 40 3 785 2005 10.1007/s10853-005-6324-7 Ko, Y.-M., Kwon, W. T., and Kim, Y.-W., “Cutting performance of Al2O3-SiC nanocomposite tools,” J. Mat. Sci., Vol. 40, No. 3, pp. 785-787, 2005.
J. Mat. Proc. Tech. G. E. D’Errico 78 1-3 53 1998 10.1016/S0924-0136(97)00463-9 D’Errico, G. E., Calzavarini, R., and Vicenzi, B., “Influence of PVD coatings on cermet tool life in continuous and interrupted turning,” J. Mat. Proc. Tech., Vol. 78, No. 1-3, pp. 53-58, 1998.
J. Am. Ceram. Soc. S. Y. Ahn 83 6 1489 2000 10.1111/j.1151-2916.2000.tb01415.x Ahn, S. Y. and Kang, S., “Formation of core/rim structure in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process,” J. Am. Ceram. Soc., Vol. 83, No. 6, pp. 1489-1494, 2000.
Mater. Sci. Eng. A F. Qi 251 1-2 276 1998 10.1016/S0921-5093(98)00609-1 Qi, F. and Kang, S., “A study on microstructural changes in Ti(CN)-NbC-Ni cermets,” Mater. Sci. Eng. A, Vol. 251, No. 1-2, pp. 276-285, 1998.
J. Am. Ceram. Soc. S. W. Kim 86 10 1761 2003 10.1111/j.1151-2916.2003.tb03551.x Kim, S. W., Min, K. H., and Kang, S., “Rim structure in Ti(C0.7N0.3)-WC-Ni cermets,” J. Am. Ceram. Soc., Vol. 86, No. 10, pp. 1761-1766, 2003.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.