최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.11 no.6, 2002년, pp.482 - 486
정영훈 (한국과학기술연구원 재료연구부) , 지광구 (한국과학기술연구원 재료연구부) , 서진유 (한국과학기술연구원 재료연구부) , 신명철 (한국과학기술연구원 재료연구부)
Sandwich sheets composed of stainless steel/aluminum/stainless steel were produced by roll cladding. In order to investigate the effect of the friction between roll and cladding sample, the lubrication condition of the roll surface was varied. Clad rolling without lubrication gave rise to a small in...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Shi-Hoon Choi, Jae Wook Kwon and Kyu Hwan Oh, 1996, "Prediction of Inhomogeneous Texture in Clad Sheet Metals by Hot Roll Bond Method" , Metals and Materials, vol. 2, no. 3, pp. 133-140.
Maki S, Nakamura M, Matsuda T, Nagai N, 1989, "Influence of Rolling Condition on fund Strength in Cladding of Steel Sheet with Aluminum",
D. Pan, K. Gao and J. Yu, 1989, "Cold Roll Bonding of Bimetallic Sheets and Strips", Materials Science and Technology, vol. 5, pp. 934-939.
이동녕, 1994, 재료강도학, 문운당 출판사, pp.82-83.
W. Truszkowski, K. Krol and B. Major, 1980, "Inhomogeneity of Rolling Texture in fcc Metals", Metallurgical Transactions A, vol. 11A, pp. 749-758.
I. L. Dillamore and W. T. Roberts, 1963-64, "Crystallographic Texture Variations through Rolled Aluminum and Copper Sheet", vol. 92, pp. 193-199.
Masao Nakamura, Seijiro Maki, Tadaaki Matsuda and Naoki Nagai, 1988, "Cold Bonding of Metal Sheets Using Mutual Sliding by Modified Contact Differential Speed Rolling", Journal of Japan Society for Technology of Plasticity, vol. 29, no. 327, pp.404 -410
Bassani, J. L., 1977, "Yield charaterization of metals with transversely isotropic plastic properties", Int. J. Mech. Sci., Vol. 19, pp. 651- 156.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.