최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.39 no.8 = no.243, 2002년, pp.769 - 774
이홍재 (요업기술원 나노세라믹센터) , 정영근 (요업기술원 나노세라믹센터) , 남궁석 (한양대학교 금속재료공학과) , 오승탁 (한양대학교 금속재료공학과) , 이재성 (한양대학교 금속재료공학과)
The powder mixture in which Fe-Ni alloy particles of 20 nm were homogeneously dispersed on
M. Ruhle, N. Claussen and A. H. Heuer, 'Transformation and Microcrack Toughening as Complementary Precesses in Zr $O_2$ -toughened $Al_2O_3$ ,' J. Am. Ceram. Soc., 69 [3] 195-97 (1986)
T. K. Kang, O. J. Kwon and K. L. Weisskopf, 'Mechanical Properties of $Al_2O_3$ -SiC Whisker Composite Materials,' J. Kor. Ceram. Soc., 23 [3] 62-6 (1986)
K. Niihara, 'New Design Concept of Structural Ceramics-ceramic Nanocomposites,' J. Ceram. Soc. Jpn., 99 [10] 974-82 (1991)
T. Sekino and K. Niihara, 'Microstructural Characteristics and Mechanical Properties for $Al_2O_3$ /Metal Nanocomposites,' Nanostruct. Mater., 6 [5-8] 663-66 (1995)
T. Nakayama, T. Sekino, Y-H. Choa and K. Niihara, 'Fab-rication of Nano-sized Metal Dispersed Magnesia Based Composites and Related Mechanical and Magnetic Prop-erties,' Kor. J. Ceram., 5 [4] 395-99 (1999)
T. Sekino, T. Nakajima, S. Ueda and K. Niihara, 'Reduction and Sintering of a Nickel-dispersed-alumina Composite and its Properties,' J. Am. Ceram. Soc., 80 [5] 1139-48 (1997)
S-T. Oh, M. Sando and K. Niihara, 'Preparation and Prop-erties of Alumina/Nickel-cobalt Alloy Nanocomposites,' J. Am. Ceram. Soc., 81 [11] 3013-15 (1998)
J. S. Lee, S-T. Oh and S. Namkung, 'Processing and Mag-netic Properties of Ni-Fe Alloy Dispersed Alumina Nano-composites,' in Synthesis, Functional Properdes and Appli-cations of Nanostructures, Vol. 676, MRS Conference Pro-ceedings. Edited by H. W. Hahn et al., MRS, Warrendale, in Print
E. P. Wohlfarth, Ferromagnetic Materials, Vol. 2, pp. 123, North-holland Publishing Co., Amsterdam, 1980
S. E. Park, J. H. Lee and H. L. Lee, 'Determination of the Biaxial Strength by Ball-on-3-ball Test,' J. Kor. Ceram. Soc., 36 [3] 225-30 (1999)
ASTM Standard F394-78, pp.466-450 in ASTM Annual Book ok Standards, Vol. 15.02, Section 15. American Society for Testing and Materials, Philadelphia, PA, 1996
G. R. Antis, P. Chhantiknl, B.R. Lawn and D. B. Marshall, 'A Critical Evaluation of Indentation Techniques for Mea-suring Fracture Toughness: 11, Strength Method,' J. Am. Ceram. Soc., 64 [9] 539-43 (1981)
J. S. Lee, T. H. Kim, J. H. Yu and S. W. Chung, 'In-situ Alloying on Synthesis of Nanosized Ni-Fe Powder,' Nano-struct. Mater., 9 [1-8] 153-56 (1997)
S. Schicker, T. Erny, D. E. Garcia, R. Janssen and N. Claus-sen, 'Microstructure and Mechanical of Al-assisted Sintered Fe/ $Al_2O_3$ Cermets,' J. Eur. Ceram. Soc., 19 [13-14] 2455-63 (1999)
C. S. Smith, 'Grains, Phase and Interphases: An Inter-pretation of the Microstructure,' Trans. Metall. Soc. AIME, 175 15-51 (1948)
W. D. Kingery, H. K. Bowen and D. R. Uhlmann, Intro-duction to Ceramics, pp. 783-90, John Wiley and Sons, New York, 1976
T. Ohji, Y-K. Jeong, Y-H. Choa and K. Niihara, 'Strength-ening and Toughening Mechanisms of Ceramic Nanocom-posites,' J. Am. Ceram. Soc., 81 [6] 1453-60 (1998)
B. Budiansky, J. C. Amazigo and A. G. Evans, 'Small-scale Crack Bridging and the Fracture Toughness of Particulate-reinforced Ceramics,' J. Mech. Phys. Solids, 36 [2] 167-87 (1988)
B. D. Cullity, Introduction to Magnetic Matehals, pp. 385-89, Addison-Wesley Publishing Com., Messachusetts, 1972
G. Bertotti, Hysteresis in Magnetism, pp. 215-16, Academic Press, San Diego, 1998
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.