참고문헌 (22)

1. M. Ruhle, N. Claussen and A. H. Heuer, 'Transformation and Microcrack Toughening as Complementary Precesses in Zr $O_2$ -toughened $Al_2O_3$ ,' J. Am. Ceram. Soc., 69 [3] 195-97 (1986) 

   상세보기

2. T. K. Kang, O. J. Kwon and K. L. Weisskopf, 'Mechanical Properties of $Al_2O_3$ -SiC Whisker Composite Materials,' J. Kor. Ceram. Soc., 23 [3] 62-6 (1986) 

3. K. Niihara, 'New Design Concept of Structural Ceramics-ceramic Nanocomposites,' J. Ceram. Soc. Jpn., 99 [10] 974-82 (1991) 

   상세보기

4. T. Sekino and K. Niihara, 'Microstructural Characteristics and Mechanical Properties for $Al_2O_3$ /Metal Nanocomposites,' Nanostruct. Mater., 6 [5-8] 663-66 (1995) 

   상세보기

5. T. Nakayama, T. Sekino, Y-H. Choa and K. Niihara, 'Fab-rication of Nano-sized Metal Dispersed Magnesia Based Composites and Related Mechanical and Magnetic Prop-erties,' Kor. J. Ceram., 5 [4] 395-99 (1999) 

6. T. Sekino and K. Niihara, 'Fabrication and Mechanical Properties of Fine-tungsten-dispersed Alumina-based Nano-composites,' J. Mater. Sci., 32 [15] 3943-49 (1997) 

   

7. T. Sekino, T. Nakajima, S. Ueda and K. Niihara, 'Reduction and Sintering of a Nickel-dispersed-alumina Composite and its Properties,' J. Am. Ceram. Soc., 80 [5] 1139-48 (1997) 

   상세보기

8. S-T. Oh, M. Sando and K. Niihara, 'Preparation and Prop-erties of Alumina/Nickel-cobalt Alloy Nanocomposites,' J. Am. Ceram. Soc., 81 [11] 3013-15 (1998) 

   상세보기

9. J. S. Lee, S-T. Oh and S. Namkung, 'Processing and Mag-netic Properties of Ni-Fe Alloy Dispersed Alumina Nano-composites,' in Synthesis, Functional Properdes and Appli-cations of Nanostructures, Vol. 676, MRS Conference Pro-ceedings. Edited by H. W. Hahn et al., MRS, Warrendale, in Print 

10. H. J. Lee, Y. K. Jeong, S-T. Oh, J. S. Lee and T. Sekino. 'Fabrication of $Al_2O_3$ /Fe-Ni Nanocomposites by Atmo-sphere-controlled Sintering and their Properties,' J. Kor. Ceram. Soc., 39 [2] 199-203 (2002) 

    원문보기 상세보기

11. E. P. Wohlfarth, Ferromagnetic Materials, Vol. 2, pp. 123, North-holland Publishing Co., Amsterdam, 1980 

12. S. E. Park, J. H. Lee and H. L. Lee, 'Determination of the Biaxial Strength by Ball-on-3-ball Test,' J. Kor. Ceram. Soc., 36 [3] 225-30 (1999) 

13. ASTM Standard F394-78, pp.466-450 in ASTM Annual Book ok Standards, Vol. 15.02, Section 15. American Society for Testing and Materials, Philadelphia, PA, 1996 

14. G. R. Antis, P. Chhantiknl, B.R. Lawn and D. B. Marshall, 'A Critical Evaluation of Indentation Techniques for Mea-suring Fracture Toughness: 11, Strength Method,' J. Am. Ceram. Soc., 64 [9] 539-43 (1981) 

    상세보기

15. J. S. Lee, T. H. Kim, J. H. Yu and S. W. Chung, 'In-situ Alloying on Synthesis of Nanosized Ni-Fe Powder,' Nano-struct. Mater., 9 [1-8] 153-56 (1997) 

    상세보기

16. S. Schicker, T. Erny, D. E. Garcia, R. Janssen and N. Claus-sen, 'Microstructure and Mechanical of Al-assisted Sintered Fe/ $Al_2O_3$ Cermets,' J. Eur. Ceram. Soc., 19 [13-14] 2455-63 (1999) 

    상세보기

17. C. S. Smith, 'Grains, Phase and Interphases: An Inter-pretation of the Microstructure,' Trans. Metall. Soc. AIME, 175 15-51 (1948) 

18. W. D. Kingery, H. K. Bowen and D. R. Uhlmann, Intro-duction to Ceramics, pp. 783-90, John Wiley and Sons, New York, 1976 

19. T. Ohji, Y-K. Jeong, Y-H. Choa and K. Niihara, 'Strength-ening and Toughening Mechanisms of Ceramic Nanocom-posites,' J. Am. Ceram. Soc., 81 [6] 1453-60 (1998) 

    상세보기

20. B. Budiansky, J. C. Amazigo and A. G. Evans, 'Small-scale Crack Bridging and the Fracture Toughness of Particulate-reinforced Ceramics,' J. Mech. Phys. Solids, 36 [2] 167-87 (1988) 

    상세보기

21. B. D. Cullity, Introduction to Magnetic Matehals, pp. 385-89, Addison-Wesley Publishing Com., Messachusetts, 1972 

22. G. Bertotti, Hysteresis in Magnetism, pp. 215-16, Academic Press, San Diego, 1998 

저자의 다른 논문 :

이홍재 (1) 이재성 (63)