최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.22 no.1 = no.69, 2002년, pp.45 - 52
이진경 (동의대학교 기계공학과) , 박영철 (동아대학교 기계공학과) , 구후택 (동아대학교 대학원)
It has been known that tensile residual stresses occurring by the thermal expansion coefficient mismatch between fiber and matrix is a cause of the weak strength of metal matrix composites(MMCs). In order to solve this problem, TiNi alloy fiber was used as a reinforced material in TiNi/A16001 shape ...
W. A. Logsdon and P. K. Liaw, 'Tensile, Fracture Toughness and Fatigue Crack Growth Rate Properties of Silicon Carbide Whisker and Particulate Reinforced Aluminum Metal Matrix Composite,' Engineering Fracture Mechanics, Vol. 24, No. 5, pp, 737-751, (1986)
권재도, 안정주, 문윤배, '제적비가 SiCp/Al 복합재료의 기계적 및 피로균열진전 특성에 미치는 영향’, 대한기계학회논문집 A, 제 20권 제 4호, pp. 1301-1308, (1996)
Yuanti Huang, Gueping Y and Ping He, 'The Investigation of Internal Friction Electric Resistance and Shape Change in TiNi Alloy During Phase Transformations,' Scripta Metallurgica, Vol. 19, pp. 1033-1038, (1985)
김영식, 박환수, 'Ti-Ni계 형상기억합금 화이어의 회전굽힘피로 특성' 대한기계학회논문집 A, 제 23권 제 3호, pp. 490-496, (1999)
Liu M, Zhang X. M, Liu L, Li YY and Shelyakov AV, 'In Situ TEM Observations of Martensite-Austenite Transformations in a Ni49Ti36Hf15 High Temperature Shape Memory Alloy,' J. of Materials Science Letters, Vol. 19, No. 15, pp. 1383-1386, (2000)
H. Prahlad, I. Chopra, 'Experimental Characterization of Ni-Ti Shape Memory Alloy Wires under Complex Loading Conditions,' Smart Structures and Materials 1999: Smart Structures and Integrated Systems, pp. 604-616, (1999)
정태헌, 이동주, '전단지연 이론을 이용한 단섬유 형태의 SMA 보강 고분자 복합재료의 열변형 거동해석', 대한기계학회논문집 A, 제 23권 제 6호, pp. 1001-1010, (1999)
J. K. Lee, J. H. Lee, S. R. Jeong, 'A Study on Microscopic Damage Behavior of Carbon Fiber Sheet Reinforced Concrete using Acoustic Emission Technique', Proc. of the 2-Asia-Australasian Conference on Composite Materials, Vol. II, pp. 781-786, (2000)
Bukkapatnam STS, Kumara SRT, Lakhtakia A, 'Analysis of Acoustic Emission Signals Machining', J. of Manufacturing Science & Engineering, Vol. 121, No. 4, pp. 568-576, (1999)
A. C. Okafor, S. R. Birdsong, 'Monitoring Drilling of Advanced Composites, Drill Wear and Exit Hole Delamination using Wave-Based Acoustic Emission', Proc. of the Process Control and Sensors for Manufacturing II , pp. 115-124, (1999)
Yano T, Budiyanto K, Yoshida K, Iseki T, 'Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite by Hot-Pressing', Fusion Engineering & Design, Vol. 41, pp. 157-163, (1998)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.