최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.8 = no.149, 2003년, pp.205 - 212
윤주철 (부산대학교 항공우주공학과 대학원) , 강범수 (부산대학교 항공우주공학과) , 김정 (부산대학교 ERC)
In this study, in order to investigate a modeling technique of the structure with bolted joints, four kinds of finite element model are introduced; a solid bolt model, a coupled bolt model, a spider bolt model, and no bolt model. All proposed models take account on prestrained effect and contact beh...
Gould, H. H. and Mikic, B. B., 'Areas of Contact and Pressure Dstribution in Bolted Joints,' Trans. of ASME, J. of Mech. Design., pp. 864-870,1972
Wileman, J., Choudhury, M. and Green, I., 'Computation of Member Stiffness in Bolted Connections,' Trans. of ASME, J. of Mech. Design., pp. 432-437,1991
Nabil, M., 'Determination of Joint Stiffness in Bolted Connections,' Trans. of ASME, J. of Mech. Design., pp. 858-861, 1976
Bickford, J. H., An Introduction to the Design and Behavior of Bolted Joints, 2nd ed., Marcel Dekker, pp. 99-123, 1990
Shigley, J. E., Mechanical Engineering Design, Metric Ed., McGraw-Hill, pp. 301-314, 78-82,1986
ANSYS Basic Analysis Guide 2.9, Defining Pretension in a Joint Fastener, ANSYS 5.7, ANSYS Inc., 2002
Roark, R. J. and Young, W. C., Formulas for Stress and Strain, 5th ed., McGraw-Hill, pp. 513-522, 1975
Timoshenko, S. P. and Goodier, J. N., Theory of Elasticity, 3rd ed., McGraw-Hill, pp. 409-420, 1970
ANSYS Structural Analysis Guide 9.4, Performing a Surface-to-Surface Contact Analysis, ANSYS 5.5, ANSYS Inc., 1999
※ AI-Helper는 부적절한 답변을 할 수 있습니다.