고순도의 세라믹분말을 합성할 수 있는 용액 화학적 합성방법의 하나로서, 폴리머를 이용한 분말합성방법이 개발되었다. 본 연구에서는 PVA(Polyvinyl Alcohol)을 이용하여 니켈 알루미네이트(NiAl$_2$O$_4$) 분말을 합성하였다. PVA 첨가에 의하여 용액내의 금속 양이온들의 분산을 극대화하며, 순수한 니켈 알루미네이트를 얻기 위한 결정화 온도를 낮출 수 있었다. PVA 폴리머를 이용함으로써 분쇄가 용이한 부드러운 팽창성 분말을 얻을 수 있었으며, 볼 밀링에 의하여 약 300 nm의 크기를 보이는 좁은 입도의 미세한 분말이 얻어졌다 1$600^{\circ}C$, 1시간 소결에 의하여 4.35 g/㎤의 밀도를 보이는 치밀한 니켈 알루미네이트를 얻을 수 있었으며, 측정된 경도, 곡강도, 파괴인성 및 열팽창계수 값은 각각 14.2 ㎬, 304 ㎫, 4.8 ㎫.m$^{1}$2/과 9.8$\times$$10^{-6}$/$^{\circ}C$를 보였다.
고순도의 세라믹분말을 합성할 수 있는 용액 화학적 합성방법의 하나로서, 폴리머를 이용한 분말합성방법이 개발되었다. 본 연구에서는 PVA(Polyvinyl Alcohol)을 이용하여 니켈 알루미네이트(NiAl$_2$O$_4$) 분말을 합성하였다. PVA 첨가에 의하여 용액내의 금속 양이온들의 분산을 극대화하며, 순수한 니켈 알루미네이트를 얻기 위한 결정화 온도를 낮출 수 있었다. PVA 폴리머를 이용함으로써 분쇄가 용이한 부드러운 팽창성 분말을 얻을 수 있었으며, 볼 밀링에 의하여 약 300 nm의 크기를 보이는 좁은 입도의 미세한 분말이 얻어졌다 1$600^{\circ}C$, 1시간 소결에 의하여 4.35 g/㎤의 밀도를 보이는 치밀한 니켈 알루미네이트를 얻을 수 있었으며, 측정된 경도, 곡강도, 파괴인성 및 열팽창계수 값은 각각 14.2 ㎬, 304 ㎫, 4.8 ㎫.m$^{1}$2/과 9.8$\times$$10^{-6}$/$^{\circ}C$를 보였다.
Soft-solution route employing PVA(Polyvinyl Alcohol) as a polymeric carrier in a mixed metal cation solution was used for synthesis of single-phase nickel aluminate (NiA1$_2$O$_4$) powders. The PVA ensured the homogeneous distribution of metal ions in the solution and it result...
Soft-solution route employing PVA(Polyvinyl Alcohol) as a polymeric carrier in a mixed metal cation solution was used for synthesis of single-phase nickel aluminate (NiA1$_2$O$_4$) powders. The PVA ensured the homogeneous distribution of metal ions in the solution and it resulted in the decrease of crystallization temperature. The synthesized powders prepared by PVA addition were soft and ball-milled easily. The ball-milled powders of about 300 nm in size were fully densified to density of 4.35 g/㎤ at 1600$^{\circ}C$ for 1 h. The Vickers hardness, flexural strength, fracture toughness and thermal expansion coefficient of the sintered nickel aluminate were 14.2 ㎬, 304 ㎫, 4.8 ㎫$.$m$^<$TEX>1/2/ and 9.8${\times}$10$^<$TEX>-6//$^{\circ}C$, respectively.
Soft-solution route employing PVA(Polyvinyl Alcohol) as a polymeric carrier in a mixed metal cation solution was used for synthesis of single-phase nickel aluminate (NiA1$_2$O$_4$) powders. The PVA ensured the homogeneous distribution of metal ions in the solution and it resulted in the decrease of crystallization temperature. The synthesized powders prepared by PVA addition were soft and ball-milled easily. The ball-milled powders of about 300 nm in size were fully densified to density of 4.35 g/㎤ at 1600$^{\circ}C$ for 1 h. The Vickers hardness, flexural strength, fracture toughness and thermal expansion coefficient of the sintered nickel aluminate were 14.2 ㎬, 304 ㎫, 4.8 ㎫$.$m$^<$TEX>1/2/ and 9.8${\times}$10$^<$TEX>-6//$^{\circ}C$, respectively.
Mocala, Krzysztof, Navrotsky, Alexandra.
Structural and Thermodynamic Variation in Nickel Aluminate Spinel.
Journal of the American Ceramic Society,
vol.72,
no.5,
826-832.
Nguyen, My H., Lee, Sang-Jin, Kriven, Waltraud M..
Synthesis of oxide powders by way of a polymeric steric entrapment precursor route.
Journal of materials research,
vol.14,
no.8,
3417-3426.
Lee, Sang-Jin, Lee, Chung-Hyo.
Fabrication of Nano-sized Titanate Powder via a Polymeric Steric Entrapment Route and Planetary Milling Process.
한국세라믹학회지 = Journal of the Korean Ceramic Society,
vol.39,
no.4,
336-340.
Tai, Lone‐Wen, Anderson, Harlan U., Lessing, Paul A..
Mixed‐Cation Oxide Powders via Resin Intermediates Derived from a Water‐Soluble Polymer.
Journal of the American Ceramic Society,
vol.75,
no.12,
3490-3494.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.