최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.12 = no.153, 2003년, pp.25 - 33
고성림 (건국대학교 기계설계학과) , 김영진 (경희대학교 산업공학과) , 장재은 (건국대학교 기계설계학과) , 이장범 (경희대학교 산업공학과) , 김지환 (경희대학교 산업공학과)
A burr has been defined as undesirable projection of material formed as a result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and produ...
Gillespie, L.K., 'Deburring Precision Miniature Parts,' Prec. Engg, Vol.1, No.4, pp. 189-198, 1979
Ko, S.L, Kim, Y.J., Ko, D.C., Han, S.W., Lee, J.Y. and Ahn, Y.J., 'Development of Expert System for Burr Formation Prediction in Face Milling,' Journal of Korean Society of Precision Engineering, Vol.18, No.2, pp.199-205, 2002.2
Hashimura, M., Hassamontr, J.and Dornfeld, D.A., 'Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation,' ASME Journal of Manufacturing Science and Engineering, Vol. 121, pp. 13-19, 1999
Kishimoto, W., Miyake, T., Yamamoto, A., Yamanaka, K. and Takano, K., 'Study of Burr Formation in Face Milling,' Bulletin Japan Society of Precision Engineering, Vol. 15, No. 1, pp. 51-52
Ko, S.L, Jun, G.B and Lee, J.K., 'Development Burr Measurement System using Laser,' 4th Korea-Japan Joint Technical Conference on Surface Finishing and Burr Technology, pp.66-76, 1999
Dornfeld, D., 'Burr Minimization in Face Milling : A Geometric Approach,' ASME, Vol. 119, May 1997
AutoCAD Release 14 Reference Manual, Autodesk, Inc., 1996
Vera B. Anand, 'Computer Graphics & Geometric Modeling for Engineers,' WILEY, 1993
※ AI-Helper는 부적절한 답변을 할 수 있습니다.