최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.12 = no.153, 2003년, pp.183 - 190
박동희 (서울대학교 대학원 기계항공공학부) , 류시형 (서울대학교 정밀기계설계공동연구소) , 김보현 (서울대학교 대학원 기계항공공학부) , 주종남 (서울대학교 기계항공공학부)
In this paper, investigated are the machining characteristics such as material removal rate and machining time with respect to discharge area and capacitance in micro electrical discharge machining (MEDM). As discharge area determined by the electrode size and capacitance change, the optimal feedrat...
Kim, C.H., Elcectrical Discharge Machining, Kigeon Publishing Co., Seoul, Korea
Masuzawa, T., and Tanaka, K. 'Water Based Dielectrics Solution for EDM,' Annals of the CIRP, Vol. 32, No. 1, pp. 119-122, 1983
Masuzawa, T., Kuo, C.L., and Fujino, M., 'Drilling of Deep Microholes by EDM Using Additional Capacity,' Bull. of Japan Society for Precision Engineering, Vol. 24 No. 4, pp. 275-276
Masuzawa, T., Tsukamoto, J. and Fujino, M., 'Drilling of Deep Microholes by EDM,' Annals of the CIRP, Vol. 38, No. 1, pp. 195-198, 1989
Yan, B.H., Huang, F.Y., Chow, H.M. and Tsai, J.Y., 'Micro-hole Machining of Carbide by Electric Discharge Machining,' J. of Materials Processing Technology, Vol. 87, pp. 139-145, 1999
※ AI-Helper는 부적절한 답변을 할 수 있습니다.