최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.27 no.12 = no.219, 2003년, pp.2085 - 2091
전성건 (강원대학교 기계메카트로닉스 대학원) , 신용주 (강원대학교 기계메카트로닉스 대학원) , 김병희 (강원대학교 기계메카트로닉스 공학부) , 김헌영 (강원대학교 기계메카트로닉스 공학부) , 전병희 (인덕대학교 컴퓨터 응용설계)
An ultrasonic machining process has been known as efficient and economical means fer precision machining of glass or ceramic materials. However, because of its complexity, the mechanism of the machining process is still not well understood. Therefore, it is hard to optimize the process parameters ef...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ghahramani,B. and Wang, Z. Y., 2001, 'Precision Ultrasonic Machining Process: a Case Study of Stress Analysis of Ceramic ( $Al_2O_3$ ),' International Journal of Machine Tools and Manufacture, Vol. 41, Issue 8, pp. 1189-1208
Sun, X. Q., Masuzawa, T., Fujino, M., 1996, 'Micro Ultrasonic Machining and Its Applications in MEMS,' Sensors and Actuators, Vol. 57, pp. 159-164
Zhang, Q. H., Zhang, J. H., Jia, Z. X. and Sun, J. L., 1999, 'Material-Removal-Rate Analysis in the Ultrasonic Machining of Engineering Ceramics,' Journal of Materials Processing Technology, Vol. 88, pp. 180-184
Clark,D. E., Pantano, C. G., Jr. and Hench, L. L., 1979, 'Corrosion of Glass,' Books for Industry and the Glass Industry, p. 1
Zhao Wansheng, Wang Zhenlong, 'Ultrasonic and Electric Discharge Machining to Deep and Small Hole on Titanium Alloy' Journal of Materials Processing Technology, Vol. 120, pp. 101-106
Ming, H., Wang, S., Louis Plebani, and Sathyanarayanan, G., 1997, 'Ultrasonic Machining,' Manufacturing Science and Technology, Trans. Of ASME, Vol. 2, pp. 169-176
Lee, T. C. and Chan, C. W., 1997, 'Mechanism of the Ultrasonic Machining of Ceramic Composites,' Journal of Materials Processing Technology, Vol. 71, pp. 195-201
Pei, Z. J. and Ferreira, P. M., 1998, 'Modeling of Ductile-Mode Material Removal in Rotary Ultrasonic Machining,' International Journal of Machine Tools and Manufacture, Vol. 38, pp. 1399-1418
Thoe, T. B., Aspinwall, D. K. and Wise, M. L. H., 1998, 'Review on Ultrasonic Machining,' International Journal of Machine Tools and Manufacture, Vol. 38, Issue 4, pp. 239-255
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.