최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기열처리공학회지 = Journal of the Korean society for heat treatment, v.16 no.3, 2003년, pp.141 - 147
안익태 (부산대학교 정밀기계공학과) , 김원태 (부산대학교 정밀기계공학과) , 조종래 (해양대학교 기계공학부) , 문영훈 (부산대학교 정밀기계공학과)
The effects of heat treatment on the fatigue life and welding residual stress of welded plates were investigated in this study. The plates were welded by flux cored arc welding process, and post weld heat treated at
Tso-Liang Teng, Chin-Ping Fung, Peng-Hsiang Chng, Wei-Chun Yang, 2001, 'Analysis of residual stresses and distortions in T-joint fillet welds', International Journal of Pressure Vessels and Piping 78, pp.523-538
Masahito Mochizuki, Toshio Hattori, Kimiaki Nakakado, 2000, 'Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences'
성요경, 1994, '선제구조 용접이음부의 피로강도 평가에 대한 검토' 대한용접학회지, 제12권 제35호
Mathar, J., 1934, 'Determination of initial Stresses by Measuring the Deformation Around Drilled Holes', Trans. ASME, Iron & Steel, Vol.56, pp.249-254
Measurement Group, 1985, 'Measurement of Non-uniform Residual Stresses Using the Hole-drilling Method', Measurement Group Tech. Note, TN-503-1, pp.1-14
ASTM, 1999, 'Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain Gage Method', Annual Book of ASTM Standards, E 837-99
ASTM, 1992, 'Standard Practice for Strain-Controlled Fatigue Testing', Annual Book of ASTM, E606-92
Raske, D, T. and Morrow, J. D., 1969, 'Mechanics of Materials in Low Cycle Fatigue Testing', Manual on Low Cycle Fatigue Testing, ASTM STP 465, pp.1-25
Ralph I.Stephens, Ali fatemi, Robert R.Stephens, Henry O.Fuchs, Metal Fatigue in Engineering, 2001
Koh, S. K and Stephens, R. I., 1991, 'Mean Stress Effects on the Low Cycle Fatigue and Fracture of Engineering Materials and Structures', Vol. 14, No.4, pp.413-428
Julie A. Bannantine, Jess J. Comer, James L. Handruck, 1990, Fundamentals of metal fatigue analysis, Chapter 1
※ AI-Helper는 부적절한 답변을 할 수 있습니다.