Advanced epoxy molding compounds (EMCs) should be considered to alleviate the thermal stress problems caused by low thermal conductivity and high elastic modulus of an EMC and by the mismatch of the coefficient of thermal expansion (CTE) between an EMC and the Si-wafer. Though A1N has some advantage...
Advanced epoxy molding compounds (EMCs) should be considered to alleviate the thermal stress problems caused by low thermal conductivity and high elastic modulus of an EMC and by the mismatch of the coefficient of thermal expansion (CTE) between an EMC and the Si-wafer. Though A1N has some advantages, such as high thermal conductivity and mechanical strength, an A1N-filled EMC could not be applied to commercial products because of its low fluidity and high modules. To solve this problem, we used 2-$\mu\textrm{m}$ fused silica, which has low porosity and spherical shape, as a small size filler in the binary mixture of fillers. When the composition of the silica in the binary filler system reached 0.3, the fluidity of EMC was improved more than twofold and the mechanical strength was improved 1.5 times, relative to the 23-$\mu\textrm{m}$ A1N-filled EMC. In addition, the values of the elastic modules and the dielectric constant were reduced to 90%, although the thermal conductivity of EMC was reduced from 4.3 to 2.5 W/m-K, when compared with the 23-$\mu\textrm{m}$ A1N-filled EMC. Thus, the A1N/silica (7/3)-filled EMC effectively meets the requirements of an advanced electronic packaging material for commercial products, such as high thermal conductivity (more than 2 W/m-K), high fluidity, low elastic modules, low dielectric constant, and low CTE.
Advanced epoxy molding compounds (EMCs) should be considered to alleviate the thermal stress problems caused by low thermal conductivity and high elastic modulus of an EMC and by the mismatch of the coefficient of thermal expansion (CTE) between an EMC and the Si-wafer. Though A1N has some advantages, such as high thermal conductivity and mechanical strength, an A1N-filled EMC could not be applied to commercial products because of its low fluidity and high modules. To solve this problem, we used 2-$\mu\textrm{m}$ fused silica, which has low porosity and spherical shape, as a small size filler in the binary mixture of fillers. When the composition of the silica in the binary filler system reached 0.3, the fluidity of EMC was improved more than twofold and the mechanical strength was improved 1.5 times, relative to the 23-$\mu\textrm{m}$ A1N-filled EMC. In addition, the values of the elastic modules and the dielectric constant were reduced to 90%, although the thermal conductivity of EMC was reduced from 4.3 to 2.5 W/m-K, when compared with the 23-$\mu\textrm{m}$ A1N-filled EMC. Thus, the A1N/silica (7/3)-filled EMC effectively meets the requirements of an advanced electronic packaging material for commercial products, such as high thermal conductivity (more than 2 W/m-K), high fluidity, low elastic modules, low dielectric constant, and low CTE.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
To improve fluidity and minimize the reduction of thermal conductivity of the EMC, fused silica can be considered as a small size filler because it has low porosity and spherical shape. In this study, to improve the fluidity of an AIN filled EMC, 2 jUm fused silica was used as a small size filler in a binary mixture of fillers. Properties such as the spiral flow, thermal conductivity, CTE, flexural strength, elastic modulus, and dielectric properties of EMC were evaluated as a function of the volume fraction of small size silica in the binary mixture of fillers.
Filler: Even though AIN filler leads to improvements in terms of thermal conductivity, thermal expansion and mechanical properties of EMC, it can also cause reduction of the moldability and the flowability. This study tried to suggest the proper combination of fillers considering fluidity, thermal conductivity, thermal expansion, and dielectric characteristics of the resulting EMCs. The mean particle size of an AIN (granule type) filler was 23 μm (ART Co.
대상 데이터
, DMA 7e) was used to measure the flexural strength and elastic modulus of cured EMC. The sample size was 20 X 5 X 3 mm. Stress-strain property was measured using a 3-point bending apparatus with a static force scan mode (0.
이론/모형
The measurement of thermal diffusivity (5) was carried out by a laser flash method (Sinku-Riko Co. Model TC-7000) at room temperature. The specific heat (C) was measured by a DSC (Perkin-Elmer Co, Pyris I).
참고문헌 (14)
W. J. McClean Status 1986, A Report of the Integrated Circuit Industry, Integrated Circuit Engineering Corporation, 1986.
E. J. Rymaszewski 1 1997 Microelectronics Packaging Handbook E. J. Rymaszewski, R. R. Tummala, and T. Watari, inMicroelectronics Packaging Handbook, R. R. Tummala, E. J. Rymaszewski, and A. G. Klopfenstein, Eds., Chapman & Hall, New York, 1997, Part I, pp 1-128.
L. T. Manzione 99 1990 Plastic Packaging of Microelectronic Devices L. T. Manzione,Plastic Packaging of Microelectronic Devices, VAN NOSTRAND REINHOLD, New York, 1990, pp 99-147.
J. H. Lupinski 1 1989 10.1021/bk-1989-0407.ch001 Polymer Materials for Electronics Packaging and Interconnection J. H. Lupinski and R. S. Moore, inPolymer Materials for Electronics Packaging and Interconnection, J. H. Lupinski and R. S. Moore, Eds., American Chemical Society, Washington DC, 1989, pp 1-24.
L. T. Manzione 60 1990 Plastic Packaging of Microelectronic Devices L. T. Manzione,Plastic Packaging of Microelectronic Devices, VAN NOSTRAND REINHOLD, New York, 1990, pp 60-64.
IEEE Trans. Adv. Pack. C. P. Wong 22 54 1999 10.1109/6040.746543 C. P. Wong and R. S. Bollampally,IEEE Trans. Adv. Pack.,22, 54 (1999).
Polym. Eng. Sci. W. Kim 39 756 1999 10.1002/pen.11464 W. Kim, J. W. Bae, I. D. Choi, and Y. S. Kim,Polym. Eng. Sci.,39, 756 (1999).
D. J. Cumberland 1987 Handbook of Powder Technology D. J. Cumberland and R. J. Crawford,Handbook of Powder Technology, Elsevier Science Publishers, Amsterdam, 1987, Vol. VI, Chap. 4.
N. Kinjo 1989 Advances in Polymer Science 88 N. Kinjo, M. Ogata, K. Nishi, and A. Kaneda,“Epoxy Molding Compounds as Encapsulation Materials for Microelectronic Devices”, in Advances in Polymer Science 88, Springer-Verlag, Berlin, Heidelberg, 1989.
F. P. Incropera 50 1996 Introduction to Heat Transfer 3rd ed. F. P. Incropera and D. P. Dewitt,Introduction to Heat Transfer, 3rd ed., John Wiley and Sons, New York, 1996, pp 50.
W. O. Kingery 1975 Introduction to Ceramics W. O. Kingery, H. K. Bower, and D. R. Uhlmann,Introduction to Ceramics, Comprise, Massachusetts, 1975, Chap. 18.
S. S. Manson 383 1981 Thermal Stress and Low Cycle Fatigue, Bobrowsky Thermal Shock Parameter S. S. Manson,Thermal Stress and Low Cycle Fatigue, Bobrowsky Thermal Shock Parameter, Robert E. Krieger Publishing Company, Florida, 1981, Section 7. 1., pp 383.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.