최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.28 no.7 = no.226, 2004년, pp.842 - 849
정지원 (부산대학교 기계기술연구소) , 김덕줄 (부산대학교 기계공학부)
The objective of this work is to study the improvement of etching characteristics in wet etching process. The etching characteristics such as etching factor were investigated under different etching conditions and compared with the spray characteristics. The spray characteristics of nozzle with diff...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Sundaram, K. B., Sah, R. E., Baumann, H., Balachandran, K. and Todi, R. M., 2003, ' Wet Etching Studies of Silicon Nitride Thin Films Deposited by Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition,' Micorelectronic engineering, Vol. 70, pp. 109-114
Geissler, M., Schmid, H., Michel, B. and Delamarche, E., 2003, 'Selective Wet Etching of Microcontact Printed Cu Substrates with Control Over the Etch Profile,' Microelectronic engineering, Vol. 67, pp. 326-332
Kim, M. and Lee, J. K., 1995, 'A Study on the Single-Side Photo Etchant,' J. Corros. Sci. Soc. of Korea, Vol. 24, No. 4, pp. 239-249
Yoon, D. S., Lee, G. W. and Park, C. H., 2000, 'Studies on the Ferric Chloride Etching of Shadow Masks,' Journal of the Korean Institute of Chemical Engineers, Vol. 38, No. 3, pp. 393-397
Allen, D. M., 1986, 'The Principles and Practice of Photochemical Machining and Photoetching,' Adam Hilger, Bristol
Visser, A. and Buhlert, M., 2001, 'Theoretical and Practical Aspects of the Miniaturization of Lead Frames by Double Sided Asymmetrical Spray Etching,' Journal of Materials Processing Technology, Vol. 115, pp. 108-113
Ueda, R., Toki, S., Tanizaki, Y., Sugiutra, T. and Asakura, S., 1994, 'Principles of Photoetching in the Fabrication of Fine-Pitch Lead Frames,' Metal Finishing, Vol. 92, No. 1, pp. 29-31
Yule, A. J., 1996, 'Swirl Atomizers Operating at High Water Pressure,' International Journal of mechanical sciences, Vol. 38, No. 8, pp. 981-1000
Lopez, B., Soucemarianadin, A. and Attane, P., 1999, 'Break-up of Continuous Liquid Jets: Effect of Nozzle Geometry,' Journal of Imaging Science and Technology, Vol. 43, No. 2, pp. 145-152
Im, K. S., Kim, H. and Lai, M. C., 2001, 'Parametric Study of the Swirler/Venturi Spray Injectors,' Journal of propulsion and power, Vol. 17, No. 3, pp. 717-727
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.