참고문헌 (92)

1. Taguchi, G, Chowdhury, S. and Taguchi, S., 2000, Robust Engineering, McGraw-hill, New York 

2. Suh, N. P., 2001, Axiomatic Design: Advances and Applications, Oxford University Press, New York 

3. Box, G E. P. and Fung, C, 1993, 'Is Your Robust Design Procedure Robust?,' Quality Engineering, Vol. 6, No. 3, pp. 503-514 

   상세보기

4. Shigley, J. E. and Mischke, C. R., 1989, Mechanical Engineering Design 5th, McGraw-Hill 

5. Dieter, G E., 2000, Engineering Design, McGraw-Hill, New York, New York, USA 

6. Hatamura, Y, 1999, The Practice of Machine Design, Oxford University Press, New York, USA 

7. Hyman, B., 1998, Fundamentals of Engineering Design, Prentice Hall, Upper saddle River, New York, USA 

8. Taguchi, G, 1986, Introduction to Quality Engineering: Designing Quality into Products and Processes, Asian Productivity Organization, Tokyo, Japan 

9. Taguchi, G, 1987, Systems of Experimental Design(Vol. I, II), Kraus International Publications, New York 

10. Phadke, M. S., 1989, Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, New Jersey 

11. Lee, K. H., Eom, I. S., Park, G. J. and Lee, W. I., 1996, 'Robust Design for Unconstrained Optimization Problems Using the Taguchi Method,' AIAA Journal, Vol. 34, No. 5, pp. 1059-1063 

    상세보기

12. Lee, K. H., Park, G J., 1996, 'Robust Optimization in Discrete Design Space for Constrained Problems,' AIAA Journal, Vol. 40, No. 4, pp. 774-780 

    상세보기

13. Ramakrishnan, B. and Rao, S., 1991, 'A Robust Optimization Approach Using Taguchi's Loss Function for Solving Nonlinear Optimization Problems,' Advances in Design Automation, Vol. 32, PP. 241-248 

14. Belegundu, A. D. and Zhang, S., 1992, 'Robustness of Design through Minimum Sensitivity,' Journal of Mechanical Design, Transactions of the ASME, Vol. 114, pp. 213-217 

    상세보기

15. Sundaresan, S., Ishii, K. and Houser, D. R., 1995, 'A Robust Optimization Procedure with Variations on Design Variables and Constraints,' Engineering Optimization, Vol. 24, No. 2, pp. 101-117 

    상세보기

16. Parkinson, A., Sorensen, C. and Pourhassan, N., 1993, 'A General-Approach for Robust Optimal-Design, ' Journal of Mechanical Design, Vol. 115, No. 1, pp. 74-80 

    상세보기

17. Parkinson, A., 1995, 'Robust Mechanical Design Using Engineering Models,' Journal of Mechanical Design, Vol. 117, pp. 48-54 

18. Parkinson, D. B., 1997, 'Robust Design by Variability Optimization,' Quality and Reliability Engineering International, Vol. 13, No. 2, pp. 97-102 

    상세보기

19. Parkinson, D. B., 2000, 'The Application of a Robust Design Method to Tolerancing,' Journal of Mechanical Design, Transactions of the ASME, Vol. 122, pp. 149-154 

    상세보기

20. Suh, N. P., 1990, The Principles of Design, Oxford University Press, New York 

21. Hwang, K. H. and Park, G. J., 2002, 'Development of a Robust Design Process Using a Robustness Index,' Transactions of KSME(A), Vol. 26, No. 10, pp. 2073-2081 

22. Hwang, K. H., 2003, 'A Robust Design Methodology Using a Robustness Index Considering Design Space and Target Value,' Ph.D. Thesis, Hanyang University, Seoul 

23. Arora, J. S., 1989, Introduction to Optimum Design, McGraw-Hill 

24. Haftka, R. T. and Gurdal, Z., 1992, Elements of Structural Optimization, Kluwer Academic Publishers 

25. Walpole, R. E., 1982, Introduction to Statistic, Macmillan, New York, USA 

26. Fowlkes, W. Y. and Creveling, C. M., 1995, Engineering Method for Robust Product Design, Addison-Wesley, Massachusetts 

27. Ronald, E. W. and Raymond, H. M., 1993, Probability and Statistics for Engineers and Scientists, 5th ed, Macmillan Publishing Company, New York 

28. Hademenos, G J., Spiegel, M. R. and Liu, J., 2001, Mathematical Handbook of Formulas and Tables: Based on Schaum's Outline of Mathematical Handbook of Formulas and Tables by Murray R. Spiegel and John Liu, McGraw-Hill, New York 

29. Lee, K. H., 1996, 'Robust Optimization in Continuous and Discrete Design Spaces for Structures.' Ph.D. Thesis, Hanyang University, Seoul 

30. Park, S.H., 2000, Quality Engineering, Min-Young Sa, Seoul 

31. Hedayat, A. S., Sloane, N. J. A. and Stufken, J., 1999, Orthogonal Arrays, Springer, New York 

32. Dehnad, K., 1989, Quality Control, Robust Design, and the Taguchi Method, Wadsworth & Brooks/Cole Pub. Co., Pacific Grove, Calif 

33. Box, G E. P., 1988, 'Signal-to-Noise Ratios, Performance Criteria, and Transformation(with discussion),' Technometrics, Vol. 30, No. 1, pp. 1-17 

    

34. Ku, K. J., Rao, S. S. and Chen, L., 1998, 'Taguchi-Aided Search Method for Design Optimization of Engineering Systems,' Engineering Optimization, Vol. 30, pp. 1-23 

    상세보기

35. Nair, V. H., 1992, 'Taguchi's Parameter Design: A Panel Discussion,' Technometrics, Vol. 34, No. 2, pp. 127-161 

    상세보기

36. Montgomery, D. C, 1991, Design and Analysis of Experiments, pp. 417-433, John Wiley & Sons, Inc., Singapore 

37. Box, G. E. P., Bisgaard, S., Fung, C. A., 1988, 'An Explanation and Critique of Taguchi's Contributions to Quality Engineering,' Quality and Reliability Engineering International, Vol. 4, pp. 123-131 

    상세보기

38. Leon, R. V, Shoemaker, A. C. and Kacker, R. N., 1987, 'Performance Measures Independent of Adjustment,' Technometrices, Vol. 29, No. 3, pp. 253-285 

    상세보기

39. Wu, F. C, Chyu, C. C, 2002, 'A Comparative Study on Taguchi's SN Ratio, Minimizing MSD and Variance for Nominal the Best Characteristic Experiment,' International Journal of Advanced Manufacturing Technology, Vol. 20, No. 9, pp. 655-659 

    상세보기

40. Welch, W. J., Yu. W. K., Kang, S. M. and Sacks, J., 1990, 'Computer Experiments for Quality Control by Parameter Design,' Journal of Quality Technology, Vol. 4(4), pp. 361-378 

41. Shoemaker, A. C, Tsui, K. L. and Wu, J., 1991, 'Economical Experimentation Method for Robust Design,' Technometics, Vol. 33, pp. 415-427 

    상세보기

42. Kwon, Y. M., Moon, I. S., 2000, 'A Comparative Study on Optimization Procedures to Robust Design,' Journal of the Korean Data & Information Science Society, Vol. 11, No. 1, pp. 65-72 

43. Shiau, G. H., 1990, 'A Study on the Sintering Properties of Iron Ores Using the Taguchi's Parameter Design,' Journal of the Chinese Statistical Association, Vol. 28, pp. 253-275 

44. Tong, L. I., Su, C. T., 1997, 'Optimizing Multi-Response Problems in the Taguchi Method by Fuzzy Multiple Attribute Decision Making,' Quality and Reliability Engineering International, Vol. 13, No. 1, pp. 25-34 

    상세보기

45. Chen, L. H., 1997, 'Designing Robust Products with Multiple Quality Characteristics,' Computers Operations Research, Vol. 24, pp. 937-944 

    상세보기

46. Vining, G. G, 1998, 'A Compromise Approach to Multiresponse Optimization,' Journal of Quality Technology, Vol. 30, pp. 309-313 

47. Tsui, K. L., 1999, 'Robust Design Optimization for Multiple Characteristic Problems,' International Journal of Production Research, Vol. 37, No. 2, pp. 433-445 

    상세보기

48. Pignatiello, J.J., 1993, 'Strategies for Robust Multiresponse Quality Engineering Experiments,' IIE Transactions, Vol. 25, No. 3, pp. 5-25 

    상세보기

49. Wu, F. C, 2002, 'Optimization of Multiple Quality Characteristic Based on Percentage Reduction,' International Journal of Advanced Manufacturing Technology, Vol. 20, No. 10, pp. 749-753 

    상세보기

50. Liao, H. C, Chen, Y. K., 2002, 'Optimizing Multi-Response Problem in the Taguchi Method by DEA Based Ranking Method,' International Journal of Quality & Reliability Management, Vol. 6, pp. 25-37 

    상세보기

51. Lee, K. H. and Park, G. J., 2001, 'Robust Optimization Considering Tolerances of Design Variables,' Computers & Structures, Vol. 79, No. 1, pp. 77-86 

    상세보기

52. Unal, R., Stanley, D. O., Engelund, W. and Lepsch, R., 1994, 'Design for Quality using Response Surface Methods,' 6th AIAA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevne, WA, AIAA, Inc., Vol. 1, pp. 592-597 

53. Unal, R., Wu, K. C. and Stanley, D. O., 1997, 'Structural Design Optimization for a Space Truss Platform Using Response Surface Methods,' Quality Engineering, Vol. 9, No. 3, pp. 441-447 

    상세보기

54. Chen, W., Allen, J. K., Mistree, F. and Tsui, K. L., 1995, 'Integration of Response Surface Methods with the Compromise Decision Support Problem in Developing a General Robust Design Procedure,' ASME Design Automation Conference (Azarm, S., et al., ed.), Boston, Massachusetts, ASME, New York, DE-Vol. 82-2, pp. 485-492 

55. d'Entremont, K. L. and Ragsdell, K. M., 1988, 'Design for latitude using TOPT,' Advances in Design Automation, DE Vol. 14, ASME. pp. 265-272 

56. Chen, W., Allen, J. K., Tsui, K. L. and Mistree, F., 1996, 'A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors,' Journal of Mechanical Design, Vol. 118, No. 4, pp. 478-485 

    상세보기

57. Rackwitz, R. and Christensen, P. T., 1992, Reliability and Optimization of Structural Systems, Springer Verlag 

58. Rao, S. S., 1996, Engineering Optimization, John Wiley and Sons, New York, USA 

59. Siddall, J. H., 1984, 'A New Approach to Probability in Engineering Design and Optimization,' Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 106, March, 1984, pp. 5-10 

    상세보기

60. Eggert, R. J. and Mayne, R. W., 1993, 'Probabilistic Optimal Design Using Successive Surrogate Probability Function,' ASME Journal of Mechanical Design, Vol. 115, pp. 385-391 

    상세보기

61. Otto, K. N. and Antonsson, E. K., 1991, 'Extensions to the Taguchi Method of Product Design,' Third International Conference On Design Theory and Methodology, (Stauffer, L. A., Ed), Miami, Florida, pp. 21.30 

62. Su, J. and Renaud, J. E., 1997, 'Automatic Differentiation in Robust Optimization,' AIAA Journal, Vol. 35, No. 6, pp. 1072-1079 

    상세보기

63. Sundaresan, S., Ishii, K. and Houser, D. R., 1991, 'A Procedure Using Manufacturing Variance to Design Gears with Minimum Transmission Error,' Journal of Mechanical Design, Vol. 113, No. 3, pp. 318-324 

    상세보기

64. Ang, A.H-S. and Tang, W.H., 1975, Probabilistic Concepts in Engineering and Design, vol. I, Basic Principles, John Wiley & Sons, Inc., New York, USA 

65. Jung, D. H. and Lee, B. C, 2000, 'Development of an Efficient Optimization Technique for Robust Design by Approximating Probability Constraints,' Transactions of KSME A, Vol. 24, No. 12, pp. 3053-3060 

66. Jung, D. H. and Lee, B. C, 2000, 'Development of an Optimization Technique for Robust Design of Mechanical Structures,' Transactions of KSME(A), Vol. 24, No. 1, pp. 215-224 

67. Han, J. S. and Kwak, B. M, 2001, 'Robust Optimal Design of a Vibratory Microgyroscope Considering Fabrication Errors,' Journal of Micromechanics and Microengineering, Vol. 11, pp. 662-671 

    상세보기

68. Myers, R. H. and Montgomery, D. C, 1995, Response Surface Methodology-Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York 

69. Hwang, K. H., Lee, K. H., Park, G J., Cho, Y C, Lee, B. Y. and Lee, S. H., 2002, 'Robust Design of the Vibratory Gyroscope with Unbalanced Inner Torsion Gimbal Using Axiomatic Design,' Proceedings of ICAC2002 Second International Conference on Axiomatic Design, Cambridge, MA 

70. Hwang, K. H., Lee, K. H., Park, G J., Lee, B. L., Cho, Y. C. and Lee, S. H., 2003, 'Robust Design of the Vibratory Gyroscope with Unbalanced Inner Torsion Gimbal Using Axiomatic Design,' Journal of Micromechanics and Microengineering, Vol. 13, No. 1, pp. 8-17 

    상세보기

71. Onwuiko, C. O., 2000, Introduction to Engineering Design Optimization, Prentice Hall 

72. Cornell, C. A., 1969, 'A Probability Based Structural Code,' Journal of the American Concrete Institute, Vol. 66, NO. 12, pp. 974-985 

73. Mohandas, S. U. and Sandgren, E., 1989, 'Multiobjective Optimization Dealing with Uncertainty,' Proceeding of the 15th ASME Design Automation Conf, Montreal, Canada, DE-Vol. 19-2, pp. 241, Sept 

74. Sandgren, E., 1989, 'A Multi-Objective Design Tree Approach for Optimization under Uncertainty,' Proceeding of the 15th ASME Design Automation Conf, Montreal, Canada, DE-Vol. 19-2, p. 249, Sept 

75. Osyczka, A., 1984, Multicriterion Optimization in Engineering in FORTRAN Programs, Ellis. Horwood Limited, West Sussex 

76. Grandhi, R. V. and Bharatran, G, 1993, 'Multiobjective Optimization of Large-Scale Structures,' AIAA Journal, Vol. 31, No. 7, pp. 1329-1337 

    상세보기

77. Mistree, F., Hughes, O. F. and Bras, B. A., 1993, The Compromise Decision Support Problem and the Adaptive Linear Programming Algorithm, Structural Optimization: Status and Promise, Kamat, M. P., Ed, pp. 247-286, Washington, D. C, USA 

78. Athan, T. W. and Papalambros, P. Y, 1996, 'A note on Weighted Criteria Methods for Compromise Solutions in Multi-Objective Optimization,' Engineering Optimization, Vol.27,pp.l55~176 

    상세보기

79. Chen, W., Wiecek, M. M. and Zhang, J., 1999, 'Quality Utility-A Compromise Programming Approach to Robust Design,' Journal of Mechanical Design, Vol. 121, No. 2, pp. 179-187 

    상세보기

80. Messac, A., 1996, 'Physical Programming Effective Optimization for Computational Design,' AIAA Journal, Vol. 34, pp. 149-158 

    상세보기

81. Messac. A., Wilson, B., 1998, 'Physical Programming for Computational Control,' AIAA Journal, Vol. 36, pp. 219-226 

    상세보기

82. Messac, A., Ismail-Yahaya, A., 2001, 'Required Relationship Between Objective Function and Pareto Frontier Orders: Practical Implications,' AIAA Journal, Vol. 39, pp. 2168-2174 

    상세보기

83. Sobieski, J. J., Barthelemy, J. and Riley, K., 1982, 'Sensitivity of Optimum Solutions of Problem Parameters,' AIAA Journal, Vol. 20, No. 9, pp. 1291-1299 

    상세보기

84. Vanderplaats, G N., 1984, Numerical Optimization Techniques for Engineering Design, Vanderplaats Research & Development Inc., Colorado, Springs. Co. USA 

85. Chen, W., Allen, J. K. and Mistree, F., 1997, 'A Robust Concept Exploration Method for Enhancing Productivity in Concurrent Systems Design,' Concurrent Engineering, Vol. 5, No. 3, pp. 203-217 

    상세보기

86. Shannon, C. E. and Weaver, W., 1949, The Mathematical Theory of Communication, University of Illinois Press, Urbana, Illinois 

87. Albano, L. D. and Suh, N. P., 1993, 'The Information Axiom and its Implication,' Intelligent Concurrent Design: Fundamentals Methodology, Modeling and Practice, ASME, Vol. 66-DE. pp. 1-12 

88. El-haik, B. and Yang, K., 1999, 'The Components of Complexity in Engineering Design,' IIE Transactions, Vol. 31, pp. 925-934 

    상세보기

89. Frey, D. D., Jahangir, E. and Engelhardt, F., 2000, 'Computing the Information Content of Decoupled Designs,' Research in Engineering Design-Theory Applications and Concurrent Engineering, Vol. 12, No. 2, pp. 90-102 

    상세보기

90. Park, G J., 2005, Analytic Methods for Design Practice, Springer Verlag (to be published) 

91. Park, G J., 2000, 'Investigation of Taguchi's Loss Function and the Probability of Success for Robust Design and Proposition of a New Index,' Internal Report, Hanyang University, Seoul, Korea 

92. Bras, B. and Mistree, F., 1994, 'Concurrent Axiomatic and Robust Design Using Compromise Decision Support Problems,' Concurrent Engineering, Vol. 8, pp. 17-31 

    상세보기

저자의 다른 논문 :

박경진 (112) 이태희 (64) 이권희 (60) 황광현 (1)