최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.13 no.5, 2004년, pp.30 - 37
This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m/min. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Nakamura, S., and Kakino, Y., 1994, 'Performance Evaluation of a Preload Convertible Spindle,' Journal of the JSPE, Vol. 60, No.5, pp. 688-692
Kim, S. I., Choi, D. B., and Park, K. H., 1993, 'Oil-Air Lubrication Characteristics of a High-Speed Spindle System for Machine Tools,' Trans. of the KSME, Vol. 17, No.2, pp. 351-358
Choi, D. B., Kim, S. I., and Song, J. B., 1994, 'Air Cooling Characteristics of a High-Speed Spindle System for Machine Tools,' Trans. of the KSPE, Vol. 11, No. 1, pp. 123-128
Kim, S. I., and Kim, K. T., 2004, 'Thermal Characteristics Analysis of a High-Speed Motor-Separated Spindle System Using Oil-Jet Lubrication Method,' Trans. of the KSMTE, Vol. 13, No.1, pp. 69-75
Kim, S. I., Choi, D. B., Kang, J. P., and Kim, N. K., 1995, Advanced Design Technologies of Machine Tool, Bando Press
Muramatsu, A., Nakamura, S., Yoneyama, H., and Iwasaki, O., 1994, 'Heat Conduction Analysis for Motor Integrated Spindle,' NSK Technical Journal, No. 658, pp. 32-39
SKF, 1989, 'More Accurate Calculation of Frictional Moment', SKF General Catalogue, pp. 58
NSK, 1993, 'Driving Torqueof Motor,' NSK Catalogue No. 3101, pp. A30
※ AI-Helper는 부적절한 답변을 할 수 있습니다.