최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.10 = no.163, 2004년, pp.20 - 25
이영문 (경북대학교 기계공학부) , 장승일 (경북대학교 기계공학부) , 전정운 (경북대학교 대학원 기계공학부) , 배현호 (경북대학교 대학원 기계공학부)
Using the multiple regression analysis cutting forces of turning processes have been predicted based on the cutting conditions such as feed rate(f), depth of cut(d), and cutting velocity(v). The statistical inference of the equation was checked by ANOVA test. The validity of the proposed regression ...
Zorev, N. N., 'Interrelationship between Shear Processes Occurring Along Tool Face and on Shear Plane in Metal Cutting,' Pro. Inter. Res. Prod. Conf., Carnegie Inst. of Tech., pp. 42-49, 1963
Jawahir, I. S., Qureshi, N. and Arsecularatne, J. A., 'On the Interrelationships of Some Machinability Parameters in Finish Turning with Cermet Chip Forming Tool Inserts,' Int. J. Mach Tools Manufact. Vol. 32. No.5, pp. 709-722, 1992
Myers., R. H., ' Classical and Modern Regression with Applications,' Duxbury, pp. 82-98, 1989
Montgomery, D.C., ' Design and Analysis of Experiments, ' John Wiley and Sons, 1976
Agresti, A., ' An introduction to categorical data analusis, ' Wiley, 1996
Baker, W. R., Marshall, E. R. and Shaw, M. C., 'The Size Effect in Metal Cutting,' TRANS. ASME, Vol. 74, pp. 61-72, 1952
※ AI-Helper는 부적절한 답변을 할 수 있습니다.