최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.10 = no.163, 2004년, pp.50 - 56
박민수 (서울대학교 기계항공공학부) , 김민태 (서울대학교 기계항공공학부) , 이해성 (서울대학교 기계항공공학부) , 주종남 (서울대학교 기계항공공학부)
Finishing is the final process in molds manufacturing and consumes much process time. Also, it influences on surface quality of molds. But, there are few systematic methods to control the process. In this work, basic experiments were carried out to study the machining characteristics of the finishin...
Schulz, H. and Hock, S., 'High-Speed Milling of Dies and Moulds - Cutting Conditions and Technology,' Annals of the CIRP, Vol. 44, pp. 35-38, 1995
Altan, T. and Lilly, B. W., 'Advanced Techniques for Die and Mold Manufacturing,' Annals of the CIRP, Vol. 42, pp. 41-61, 1993
Lilly, B. W., Bailey, R. W. and Altan, T., 'Automated Finishing of Dies and Molds: A State of the Art Review,' Proc. of ASME Winter Annual Meeting, Chicago, 11/27-12/2, pp. 75-90, 1988
Kim, M., 'Pattern Characteristics and Time Estimation in Manual Finishing Process of Ball End Milled Surface,' M.S. thesis school of Mech. And Aero. Eng. Seoul National University, 2000
Rabinowicz, E., 'Friction and Wear of Materials,' John Wiley & Sons, Inc., 2nd ed., pp. 124-190, 1995
Eyre, T. S., 'Wear Characteristics of metals,' Tribology International, Vol. 10, pp. 203-212, 1976
Mulhearn, T. O. and Samuels, L. E., 'The Abrasion of Metals: A Model of the Process,' Wear, Vol. 5, pp. 478-498, 1962
※ AI-Helper는 부적절한 답변을 할 수 있습니다.