최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.13 no.6, 2004년, pp.1 - 9
For improvement of productivity and cutting tool lift, cutting force in end milling needs to be predicted accurately. In order to analyze cutting force, the cutting dynamics was modelled mathematically by using chip load, cutting geometry, and the relationship between cutting forces and the chip loa...
Altintas, Y., and Ghan, P. K., 1992, 'In-Process Detection and Suppression of Chatter in Milling,' Int. J. MTDR., Vol. 32, No. 3, pp. 329-347
Minis, I., Yanushevsky, R., and Tembo, A., 1990, 'Analysis of Linear and Nonlinear Chatter in Milling,' CIRP, Vol. 39, No.1, pp. 459-462
Tarng, Y. S., Cheng, C. I., and Kao, J. Y., 1995, 'Modeling of Three-Dimensional Numerically Controlled End Milling Operations,' Int. J. MTDR., Vol. 35, No.7, pp. 939-950
Smith, S., and Tlusty, J., 1993, 'Efficient Simulation Programs for Chatter in Milling,' CIRP, Vol. 42, No.1, pp. 463-466
Kline, W. A., DeVor, R. E., and Lindberg, J. R., 1982, 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' Int. J. MTDR., Vol. 22, No. 11, pp. 7-22
Choi, J. G., Kang, Y. K., and Lee, J. J., 2003, 'A Study on the Flexible Cutting Force Model in the Ball End Milling Process,' J. of KSMTE, Vol. 12, No.2, pp. 44- 52
Hong, M. S., 2002, 'A Study on the Instantaneous Shear Plane Based Cutting Force Model for End Milling,' J. of KSMTE, Vol. 11, No.4, pp. 34-43
Montgomery, D. C., 1976, Design and Analysis of Experiments, John Wiley & Sons
※ AI-Helper는 부적절한 답변을 할 수 있습니다.