최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of precision engineering and manufacturing, v.6 no.3, 2005년, pp.13 - 18
Kim Kug Wean (Department of Mechanical Engineering, Soonchunhyang University)
This paper presents an effective cutting force model that enables us to predict the instantaneous cutting force in face milling from knowledge of the work material properties and the cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake ...
Oxley, P.L.B., 'Mechanics of Machining: An Analytical Approach to Assessing Machinability,' Ellis Horwood, Chichester, 1989
Young, H.T., Mathew, P. and Oxley, P.L.B., 'Predicting Cutting Forces in Face Milling,' Int. J. Mach. Tools Manufact., Vol. 34, No. 6, pp. 771-783, 1994
Stevenson, M.G. and Oxley, P.L.B., 'An experimental Investigation of the Influence of Speed and Scale on the Strain-rate in a Zone of Intense Plastic Deformation,' Proc. Inst. Mech. Eng. Vol. 184, pp. 561-576, 1969-1970
Boothroyd, G., 'Temperatures in Orthogonal Metal Cutting,' Proc. Inst. Mech. Eng. Vol. 177, pp. 789-802, 1963
Usui, E., 'Analytical Prediction of Three Dimensional Cutting Process,' Trans. ASME J. of Eng. for Ind., Vol. 100, pp. 229-235, 1978
Lee, W.Y., Sin, H.C., 'Force Analysis of Face Milling Process by Shear Flow Stress,' Trans. KSME, Vol. 13, No. 6, pp. 1170-1182, 1989
Stabler, G.V., 'Geometry of Cutting Tools,' Proceedings of the Institution of Mechanical Engineers, London, Vol. 165, pp. 14-26, 1951
※ AI-Helper는 부적절한 답변을 할 수 있습니다.