$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

전기저항측정 및 미세역학시험법을 이용한 탄소나노섬유/튜브 및 전기방사된 나노섬유/에폭시 복합재료의 계면특성 및 감지능 연구
Interfacial Properties and Sensing of Carbon Nanofiber/Tube and Electrospun Nanofiber/Epoxy Composites Using Electrical Resistance Measurement and Micromechanical Technique 원문보기

복합재료 : 한국복합재료학회지 = Journal of the Korean Society for Composite Materials, v.18 no.4, 2005년, pp.21 - 26  

정진규 (경상대학교 신소재공학부) ,  김성주 (경상대학교 신소재공학부) ,  박종만 (경상대학교 신소재공학부)

초록
AI-Helper 아이콘AI-Helper

탄소나노튜브 및 탄소나노섬유/에폭시 복합재료의 비파괴 손상감지능 및 응력전달 메카니즘이 전기-미세기계적 실험법을 통하여 조사되었다. 전기-미세기계적 실험법은 균일한 반복하중 하에서 전기저항을 측정함으로써 탄소나노복합재료의 감지반응을 평가하는 것이다. 큰 탄소섬유 부피 분율이 있는 복합재료가 에폭시 자체나 작은 부피 분율에 비하여 매우 큰 인장강도 특성을 보여주었다. 탄소나노섬유 복합재료는 제한된 온도범위 내에서 습도 감지능을 보여주었다. 형상비가 작은 탄소나노섬유 복합재료는 많이 첨가된 부피량에 기인하여 보다 큰 겉보기 탄성계수를 보여 주었다. 열처리된 전기 방사된 PVDF 나노섬유는 증대된 결정화에 기인하여 미처리의 경우보다 큰 기계적 특성을 보여 주었으며, 그 반면에 응력 감지능은 열처리의 경우에 감소를 보여 주었다. 전기 방사된 나노섬유는 또한 응력전달 뿐만 아니라 습도 및 온도에 대한 감지능도 나타내었다. 탄소나노튜브. 탄소나노섬유 및 전기 방사된 PVDF 나노섬유는 나노복합재료의 다기능에 응용할 수 있을 것이다.

Abstract AI-Helper 아이콘AI-Helper

Nondestructive damage sensing and load transfer mechanisms of carbon nanotube (CNT) and nanofiber (CNF)/epoxy composites have been investigated by using electro-micromechanical technique. The electrospun PVDF nanofibers were also prepared as a piezoelectric sensor. The electro-micromechanical techni...

주제어

참고문헌 (12)

  1. A. Allaoui, S. Bai, H. M. Cheng, J. B. Bai, 'Mechanical and electrical properties of a MWNT/epoxy composite,' Compos Sci Technol., Vol 62, 2002, pp. 1993-1998 

  2. O. Lourie, H. D., Wagner, 'Evidence of stress transfer and formation of fracture clusters in carbon nanotube-based composites,' Compos Sci Technol., Vol. 59, 1999, pp. 975-987 

  3. E. T. Thostenson, Z. Ren, T. W. Chou, 'Advances in the science and technology of carbon nanotubes and their composites: a review,' Compos Sci Technol., Vol. 61, 2002, pp. 1899-1912 

  4. O. Lourie, H. D. Wagner, 'Evidence of stress transfer and formation of fracture clusters in carbon nanotube-based composites,' Compos Sci Technol., Vol. 59, 1999, pp. 975-7 

  5. L. S. Schadler, S. C. Giannaris, P. M. Ajayan., 'Load transfer in carbon nanotube epoxy composites,' Appl Phys Lett., Vol. 73, 1998, pp. 3842-3844 

  6. Z. Wang, Z. Liang, B. Wang, C. Zhang, L. Kramer, 'Processing and property investigation of single-wall carbon nanotube (SWNT) buckypaper/epoxy resin matrix composites,'Comp. Part A, Vol. 35, 2004, pp. 1225-1232 

  7. Z. M. Huang, Y. Z. Zhang, M. Kotaki, S. Ramakrishna, 'A review on polymer nanofibers by electro spinning and their applications in nanocomposites,' Compos Sci Technol., Vol. 63, 2002, pp. 2223-2253 

  8. S. S. Choi, Y. S. Lee, C. W. Joo, S. G. Lee, J. K. Park, K. S. Han, 'Electrospun PVDF nanofiber web as polymer electrolyte or separator,' Electrochimica Acta, Vol. 50, 2004, pp. 339-343 

  9. S. Wang, S. I. Lee, D. D. L. Chung and J. M. Park, 'Load transfer from fiber to polymer matrix, studied by measuring the apparent elastic modulus of carbon fiber embedded in epoxy,' Compos. Interf. Vol. 8, No.6, 2001, pp. 435-441 

  10. J. M. Park, D. S. Kim, J. R. Lee, T. W. Kim, 'Nondestructive damage sensitivity and reinforcing effect of carbon nanotube/epoxy composites using electromicromechanical technique,' Materials Sci Eng. C, Vol. 23, 2003, pp. 971-975 

  11. J. M. Park, S. I. Lee, J. H.Choi, 'Strain-stress sensing and nondestructive evaluation of single-carbon fiber reinforced epoxy composites by electrical resistivity measurement,'Compos Sci Technol., Vol. 65, No.2, 2005, pp. 571-580 

  12. J. M. Park, S. I. Lee, J. H. Choi, 'Strain-stress sensing and nondestructive evaluation of single-carbon fiber reinforced epoxy composites by electrical resistivity measurement,' Compos Sci Technol., Vol. 65, No.2, 2005, pp. 571-580 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로